C3D8R and F3D8R |
您所在的位置：网站首页 › 达摩祖师的原名是什么 › C3D8R and F3D8R |
|
Next: Incompatible mode eight-node brick
Up: Element Types
Previous: Eight-node brick element (C3D8
Contents
Eight-node brick element with reduced integration (C3D8R and F3D8R) The C3D8R element is a general purpose linear brick element, with reduced integration (1 integration point). The shape functions are the same as for the C3D8 element and can be found in [36]. The node numbering follows the convention of Figure 53 and the integration point is shown in Fig 55. Figure 55: 1x1x1 integration point scheme in hexahedral elements Due to the reduced integration, the locking phenomena observed in the C3D8 element do not show. However, the element exhibits other shortcomings: The element tends to be not stiff enough in bending. Stresses, strains.. are most accurate in the integration points. The integration point of the C3D8R element is located in the middle of the element. Thus, small elements are required to capture a stress concentration at the boundary of a structure. There are 12 spurious zero energy modes leading to massive hourglassing: this means that the correct solution is superposed by arbitrarily large displacements corresponding to the zero energy modes. Thus, the displacements are completely wrong. Since the zero energy modes do no lead to any stresses, the stress field is still correct. In practice, the C3D8R element is not very useful without hourglass control. Starting with version 2.3 hourglass control is automatically activated for this element, thus alleviating this issue.The F3D8R element is the corresponding fluid element. Next: Incompatible mode eight-node brick Up: Element Types Previous: Eight-node brick element (C3D8 Contents guido dhondt 2014-03-02 |
| CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |