H3C静态路由与BFD联动(单跳检测)配置案例 |
您所在的位置:网站首页 › nqa和bfd的区别 › H3C静态路由与BFD联动(单跳检测)配置案例 |
1. 组网需求
l 在Switch A上配置静态路由可以到达Switch C,并使能BFD检测功能。 l 当Switch A和Switch B之间的链路出现故障时,Switch A选择经过Switch D到达Switch C。 2. 组网图图1-7 静态路由BFD(单跳检测)配置组网图 3. 配置步骤 (1) 配置各接口的IP地址(略) (2) 配置BFD # 在Switch A上配置静态路由,并使能BFD检测功能,通过BFD echo报文方式实现BFD功能。 system-view [SwitchA] bfd echo-source-ip 10.1.1.102 [SwitchA] ip route-static 120.1.1.1 24 vlan-interface 10 10.1.1.100 bfd echo-packet [SwitchA] ip route-static 120.1.1.1 24 vlan-interface 11 11.1.1.2 preference 65 [SwitchA] quit (3) 检查配置结果 # 显示Switch A使能BFD信息。 display bfd session
Total Session Num: 1 Init Mode: Active
Session Working Under Echo Mode:
LD SourceAddr DestAddr State Holdtime Interface 7 10.1.1.102 10.1.1.100 Up 1700ms Vlan10 # 显示Switch A路由表详细信息。 display ip routing-table protocol static Public Routing Table : Static Summary Count : 2
Static Routing table Status : Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
120.1.1.1/24 Static 65 0 10.1.1.100 Vlan10
Direct Routing table Status : Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
120.1.1.1/24 Static 60 0 11.1.1.2 Vlan11 # 在Switch A上打开BFD功能调试信息开关。 debugging bfd event debugging bfd scm terminal debugging # 当Switch B和二层交换机之间的链路发生故障时。可以看到Switch A能够快速感知Switch B的变化。 %Nov 12 19:28:28:592 2005 SwitchA BFD/5/LOG:Sess[123.1.1.1/10.1.1.100, Vlan10], Sta: UP->DOWN, Diag: 1 *0.53892593 SwitchA BFD/8/SCM:Sess[123.1.1.1/10.1.1.100, Vlan10], Oper: Reset *0.53892593 SwitchA BFD/8/EVENT:Send sess-down Msg, [Src:123.1.1.1, Dst:10.1.1.100, Vlan10] Protocol: STATIC *0.53892595 SwitchA RM/7/LOG:static route [Dest:120.1.1.1/24,Nexthop:10.1.1.100,ExitIf: Vlan10] became invalid # 当Switch A到Switch B链路发生故障时,通过display ip routing-table protocol static命令查看路表信息。Switch A选择经过Switch D静态路由到达Switch C。 display ip routing-table protocol static Public Routing Table : Static Summary Count : 2
Static Routing table Status : < Active> Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
120.1.1.1/24 Static 65 0 11.1.1.2 Vlan11
Static Routing table Status : < Inactive> Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
120.1.1.1/24 Static 60 0 10.1.1.100 Vlan10 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |