centos 6.8 ssh安装及配置 |
您所在的位置:网站首页 › 怎么安装centos610 › centos 6.8 ssh安装及配置 |
1. dnf安装ssh dnf -y install ssh 2. 启动ssh service sshd start 3.开机自动运行启动 chkconfig sshd on 4.ssh文件配置 [root@linux234 ~]# vi /etc/ssh/sshd_config ← 用vi打开SSH的配置文件 #Protocol 2,1 ← 找到此行将行头“#”删除,再将行末的“,1”删除,只允许SSH2方式的连接 ↓ Protocol 2 ← 修改后变为此状态,仅使用SSH2 #ServerKeyBits 768 ← 找到这一行,将行首的“#”去掉,并将768改为1024 Centos 6.8默认已经是1024了 ↓ ServerKeyBits 1024 ← 修改后变为此状态,将ServerKey强度改为1024比特 #PermitRootLogin yes ← 找到这一行,将行首的“#”去掉,并将yes改为no ↓ PermitRootLogin no ← 修改后变为此状态,不允许用root进行登录 #PasswordAuthentication yes ← 找到这一行,将yes改为no ↓ PasswordAuthentication no ← 修改后变为此状态,不允许密码方式的登录 #PermitEmptyPasswords no ← 找到此行将行头的“#”删除,不允许空密码登录 ↓ PermitEmptyPasswords no ← 修改后变为此状态,禁止空密码进行登录 然后保存并退出。(vi保存退出的命令为ZZ 或按下ESC 在: 就是冒号。[root@linux234 ~]#:wq! )
安全方面 启用内网网段可访问 禁止其他 [root@linux234 ~]# vi /etc/hosts.deny ← 修改屏蔽规则,在文尾添加相应行 # hosts.deny This file describes the names of the hosts which are # *not* allowed to use the local INET services, as decided # by the ‘/usr/sbin/tcpd’ server. # # The portmap line is redundant, but it is left to remind you that # the new secure portmap uses hosts.deny and hosts.allow. In particular # you should know that NFS uses portmap! sshd: ALL ← 添加这一行,屏蔽来自所有的SSH连接请求 [root@linux234 ~]# vi /etc/hosts.allow ← 修改允许规则,在文尾添加相应行 # # hosts.allow This file describes the names of the hosts which are # allowed to use the local INET services, as decided # by the ‘/usr/sbin/tcpd’ server. # sshd: 192.168.0. ← 添加这一行,只允许来自内网的SSH连接请求 或指定一个IP,多个IP用逗号分开 重新启动SSH service sshd restart 或/etc/init.d/ssh restart [root@linux234 ~]#service sshd restart Stopping sshd: [ OK ] Starting sshd: [ OK ] ← SSH服务器重新启动成功
登录服务器 1.Linux客户机 # ssh IP地址 //输入服务器IP登录,不加用户名默认以root身份登录 或者 # ssh yonghu1@IP //以yonghu1身份登入服务器 ssh -p 端口 yonghu1@IP |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |