LaTeX技巧835:Springer的投稿模板LLNCS类使用教程 |
您所在的位置:网站首页 › 工作邮箱怎么写格式图片模板 › LaTeX技巧835:Springer的投稿模板LLNCS类使用教程 |
模板文件说明history.txt宏包的版本历史信息llncs.cls模板类文件llncs.dem一个编码的样例文件llncs.doc文档的指南,本文的源代码等等llncsdoc.pdf模板的使用指南PDF版本llncsdoc.styclass modifications to help for the instructionsllncs.ind作者索引文件(模拟的)subjidx.ind来自于Springer书宏包的主题索引演示样例llncs.dvi生成的DVI样例sprmindx.sty索引生成的补充宏包(使用方法: makeindex -s sprmindx.sty )启用LLNCS 类 LLNCS 只是标准 LATEX “article” class 的拓展版本,所以在文章中可以使用所有 “article” 的语法。如果要使用 LLNCS class,则使用如下形式: \documentclass{llncs} % \begin{document} \end{document}文章已经用 LATEX 写好而未使用 LLNCS 格式的情况请不要使用任何会影响文档布局或格式的 LATEX 或 TEX命令(即像 \textheight, \vspace, \headsep, etc)。然而,有可能会有例外的情况下,可以使用一些。 公式输入公式会以您文章出现的顺序在右手边使用阿拉伯数字自动编号。当你的工作在数学模式时,都是用斜体字排版。有时候你需要插入非数学元素(例如单词或短语)。这种插入的代码应该使用 roman(即\mbox)如下例所示: \begin{equation} \left(\frac{a^{2} + b^{2}}{c^{3}} \right) = 1 \quad \mbox{ if } c\neq 0 \mbox{ and if } a,b,c\in \bbbr \enspace . \end{equation}如果你想在一个显示公式后立即开始新的段落,插入一个空白行,以产生所需的缩进。如果不插入一个空白行或代码 \noindent 会立即继续之前的文本而没有没有新的段落。 displayed 公式也使用相同的方式处理,其他普通文本则在结束本句前使用 \enspace。 注意括号的尺寸或其他分隔符必须保证是闭合的,使用下面命令可以保证: \left( 或者 \left[ 和 \right) 或者 \right].斜体和 Roman 体在公式中,一般使用斜体,但下标应使用 Roman 体而不是斜体。 确保一些物理标记使用 \mathrm 命令,如 Hz: \mathrm{Hz}。还有一些常用的数学函数,如 log,sin,exp,max和sup应该使用:\log,\sin,\exp,\max 和 \sup。 化学式应该使用 Roman 体,如: H2O。 熟悉的单词或句子不应使用斜体,如: et al., a priori, in situ, bremsstrahlung, eigenvalues。 如何编辑输入代码页眉部分标题中的所有单词应该都大写,除了连词、介词 (例如 on, of, by, and, or, but, from, with, without, under) 还有定冠词和不定冠词 (the, a, an) 除非他们出现在开头,否则均小写。公式的字母必须在文本内排版。 大写和不大写下面情况均需大写: Headings。 文章中的缩写和表达式,如: Fig(s)., Table(s), Sect(s)., Chap(s)., Theorem, Corollary, Definition etc. 跟数字一起使用时,如: Fig.3, Table 1, Theorem 2。 下面情况不能大写: 在文章中,当 figure(s), table(s), equation(s), theorem(s) 等词没有与编号一起使用时。 图表图例和表格标题,除非是缩写。 词的缩写下列词除非是出现在句子开头,否则在文章中应该使用缩写: Chap., Sect., Fig.。例如: The results are depicted in Fig.5. Figure 9 reveals that …. 注: 公式一般使用括号跟数字代替,但出现在句子开头时需使用 “Equation”。 例如:Equation (14) is very important. However, (15) makes it clear that ….如果文章中有出现全局的缩写,应该在第一次出现的时候标明,如: Plurisubharmonic (PSH) Functions, Strong Optimization (SOPT) Problem. 文章的开头文章的标题(必须的)使用如下形式: \title{}标题中所有单词应大写,除了连词、介词和不出现在开头的定冠词和不定冠词。标题没有结束标点。 如果是很长的标题,使用 \\ 另起一行。 如果你想制定一个页眉的内容可以通过\documentclass 的runningheads 参数来进行重新指定,对于长标题就是在页眉范围内容无法显示完全的,可以通过下面的命令进行页眉内容的缩写如: \titlerunning{}用下面的命令,可以改变文档在目录中的显示标题内容。 \toctitle{}副标题使用: \subtitle{}作者使用: \author{}为每个作者或地址指定标号时,使用: \inst{}超过一位作者的话,可以使用 \and 分隔。例如: \author{Ivar Ekeland\inst{1} \and Roger Temam\inst{2}}下面就是地址(学校,公司)了,多于一个地址,使用 \and 命令会自动编号,请确保跟作者顺序对应。 \institute{ \and \and }在 \institute 内使用 \email{} 可以提供email地址。如果在文章的任何地方需要注脚,请使用(immediately after the word where the footnote indicator should be placed): \thanks{}\thanks 仅能出现在 \title, \author and \institute中. 如果有两个或更多的脚注使用 \fnmsep (i.e. footnote mark separator) 分隔. \maketitle然后 heading 就结束了,到这一步为止,还不会产生任何文本。 接下来就是摘要: \begin{abstract} \end{abstract} ``` ### How to Code Your Text ### 用以下代码的话,标题会自动编号: ```cpp \section{This is a First-Order Title} \subsection{This is a Second-Order Title} \subsubsection{This is a Third-Order Title.} \paragraph{This is a Fourth-Order Title.}\section and \subsection 没有 end punctuation。\subsubsection and \paragraph 需要在末尾 punctuate。 另外,theorem-like environments 会自动编号,如果要使用计数器,只需指定 envcountsame: \documentclass[envcountsame]{llncs}例如 \begin{lema},第一次调用时会编号为1,再次调用编号为2,以此类推。如果需要每个 section 都重新计数,则指定为 envcountreset: \documentclass[envcountreset]{llncs}预定义的 Theorem-like Environments下面的标题随你选择: 加粗并带斜体文本的 run-in 标题: \begin{corollary} \end{corollary} \begin{lemma} \end{lemma} \begin{proposition} \end{proposition} \begin{theorem} \end{theorem}以下的一般表现为斜体 run-in 标题: \begin{proof} \qed \end{proof}这不编号,并且在结束前有一个吸引眼球的 square (即 \qed)。 更多斜体和加粗体 run-in 标题: \begin{definition} \end{definition} \begin{example} \end{example} \begin{exercise} \end{exercise} \begin{note} \end{note} \begin{problem} \end{problem} \begin{question} \end{question} \begin{remark} \end{remark} \begin{solution} \end{solution}自定义的 Theorem-like Environments加强了标准的 \newtheorem 命令,得到两个新的命令 \ spnewtheorem 和 \spnewtheorem*,现在可以使用来定义新的语法。需要两个参数:type style 和 text style。type style 表示所出现的环境,text style 表示新环境的 text style。使用 \ spnewtheorem 的两种方法: 第一种(推荐!)如果想与其他环境共享计数器,使用 \spnewtheorem{}[]{} {}{}[] 指定为想要共享的环境。 例如: \spnewtheorem{mainth}[theorem]{Main Theorem}{\bfseries}{\itshape} \begin{theorem} The early bird gets the worm. \end{theorem} \begin{mainth} The early worm gets eaten. \end{mainth}输出为: Theorem 3. The early bird gets the worm. Main Theorem 4. The early worm gets eaten.第二种\spnewtheorem{}{}[]{}{}上述代码会定义一个名为 的环境,它以 打印标题 , 它以 打印文本。在每个新 section 指定 时,会重新编号。 例如: \spnewtheorem{joke}{Joke}[subsection]{\bfseries}{\rmfamily}如果想要非编号环境,使用: \spnewtheorem*{}{}{}{}程序代码可以使用 verbatim 环境或者 LATEX 的 verbatim package。 文章示例: \title{Hamiltonian Mechanics} \author{Ivar Ekeland\inst{1} \and Roger Temam\inst{2}} \institute{Princeton University, Princeton NJ 08544, USA \and Universit\’{e} de Paris-Sud, Laboratoire d’Analyse Num\’{e}rique, B\^{a}timent 425,\\ F-91405 Orsay Cedex, France} \maketitle % \begin{abstract} This paragraph shall summarize the contents of the paper in short terms. \end{abstract} % \section{Fixed-Period Problems: The Sublinear Case} % With this chapter, the preliminaries are over, and we begin the search for periodic solutions \dots % \subsection{Autonomous Systems} % In this section we will consider the case when the Hamiltonian $H(x)$ \dots % \subsubsection*{The General Case: Nontriviality.} % We assume that $H$ is $\left(A_{\infty}, B_{\infty}\right)$-subqua\-dra\-tic at infinity, for some constant \dots % \paragraph{Notes and Comments.} The first results on subharmonics were \dots % \begin{proposition} Assume $H’(0)=0$ and $ H(0)=0$. Set \dots \end{proposition} \begin{proof}[of proposition] Condition (8) means that, for every $\delta’>\delta$, there is some $\varepsilon>0$ such that \dots \qed \end{proof} % \begin{example}[\rmfamily (External forcing)] Consider the system \dots \end{example} \begin{corollary} Assume $H$ is $C^{2}$ and $\left(a_{\infty}, b_{\infty}\right)$-subquadratic at infinity. Let \dots \end{corollary} \begin{lemma} Assume that $H$ is $C^{2}$ on $\bbbr^{2n}\backslash \{0\}$ and that $H’’(x)$ is \dots \end{lemma} \begin{theorem}[(Ghoussoub-Preiss)] Let $X$ be a Banach Space and $\Phi:X\to\bbbr$ \dots \end{theorem} \begin{definition} We shall say that a $C^{1}$ function $\Phi:X\to\bbbr$ satisfies \dots \end{definition}输出示例如下图,或官网下载查看: 例如 21\,$^{\circ}$C etc., Dr h.\,c.\,Rockefellar-Smith \dots 20,000\,km and Prof.\,Dr Mallory \dots 1950--1985 \dots this -- written on a computer -- is now printed $-30$\,K \dots输出 21◦C etc., Dr h.c.Rockefellar-Smith ... 20,000km and Prof.Dr Mallory ... 1950–1985 ... this – written on a computer – is now printed −30K ...特殊字体普通的字体类型(Roman)不需要代码。斜体 ({\em } 或 \emph{}),如果需要,黑体用于强调: 特殊字体意义{\itshape Text}斜体文本{\em }强调的文本{\bfseries Text}重要文本\vec{Symbol}向量只能出现在 math mode。如 $\vec{A \times B\cdot C} 得到A×B ·C脚注注脚应该被包含在下面代码中: \footnote{Text}列表例如 \begin{enumerate} \item First item \item Second item \begin{enumerate} \item First nested item \item Second nested item \end{enumerate} \item Third item \end{enumerate}插图图片应该插入到第一次提到该图片的段落后(不是段落中),它会被自动编号。图片应该是 PostScript 文件——最好是 EPS 数据,通过 epsfig package 生成。 格式: \begin{figure} \vspace{x cm} \caption[ ]{...text of caption...} (Do type [ ]) \end{figure}更多请参见 LATEX 文档 p. 26 ff. 和 p. 204 表格使用 LATEX 编写表格\begin{table} \caption{Critical $N$ values} \begin{tabular}{llllll} \hline\noalign{\smallskip} ${\mathrm M}_\odot$ & $\beta_{0}$ & $T_{\mathrm c6}$ & $\gamma$ & $N_{\mathrm{crit}}^{\mathrm L}$ & $N_{\mathrm{crit}}^{\mathrm{Te}}$\\ \noalign{\smallskip} \hline \noalign{\smallskip} 30 & 0.82 & 38.4 & 35.7 & 154 & 320 \\ 60 & 0.67 & 42.1 & 34.7 & 138 & 340 \\ 120 & 0.52 & 45.1 & 34.0 & 124 & 370 \\ \hline \end{tabular} \end{table}更多请参见原文档和 LATEX 官方文档 pp.41 ff. 参考文献有三种参考文献模式:number only,letter-number, 或 author-year。更多请参见 LATEX 官方文档 p. 71. LLNCS 有一种特殊的 BIBTEX 格式,使用class: splncs.bst。调用代码 \bibliographystyle{splncs}。 如果打算使用 author BIBTEX style,请指定 [oribibl] 参数: \documentclass[oribibl]{llncs}Letter-Number 或 Number Only在文章中使用 \cite 命令来引用文章,会得到形如:[1],[E1, S2], [P1] 中之一的格式,这取决于 thebibliography 环境中 \bibitem 的使用。 thebibliography 环境: \begin{thebibliography}{[MT1]} . . \bibitem[CE1]{clar:eke} Clarke, F., Ekeland, I.: Nonlinear oscillations and boundary-value problems for Hamiltonian systems. Arch. Rat. Mech. Anal. 78, 315--333 (1982) . . \end{thebibliography}在文章中引用时: The results in this section are a refined version of \cite{clar:eke};Number-Only Systemthebibliography 环境: \begin{thebibliography}{1} \bibitem {clar:eke} Clarke, F., Ekeland, I.: Nonlinear oscillations and boundary-value problems for Hamiltonian systems. Arch. Rat. Mech. Anal. 78, 315--333 (1982) \end{thebibliography}在文章中引用时: \cite{n1,n3,n2,n3,n4,n5,foo,n1,n2,n3,n4,n5}Author-Year System效果就像这样:(Smith 1970,1980),(Ekelandetal.1985,Theorem2),(JonesandJffe 1986; Farrow 1988, Chap.2)。如果名字作为句子的一部分,那么括号内就可能只出现年份,如,Ekeland et al. (1985, Sect.2.1)。 如果有几个文章属于同一(多)个作者,引用时应列在适当的顺序,表示如下: 一个作者:按文章时间排序; 相同的合作作者:按文章时间排序; 和不同的合作作者:按合作作者名字进行字母排序; 如果,有多个同样的作者同样的时间的文章,用 “a”, “b”, “c”, etc 区分。How to Code Author-Year System要使用这个系统,则需指定 [citeauthoryear] 参数,如: \documentclass[citeauthoryear]{llncs}thebibliography 环境: \begin{thebibliography}{} % (do not forget {}) . . \bibitem[1982]{clar:eke} Clarke, F., Ekeland, I.: Nonlinear oscillations and boundary-value problems for Hamiltonian systems. Arch. Rat. Mech. Anal. 78, 315--333 (1982) . . \end{thebibliography}在文章中引用时: The results in this section are a refined version of Clarke and Ekeland (\cite{clar:eke});产生 The results in this section are a refined version of Clarke and Ekeland (1982);END. 选自:http://bluestein.github.io/2016/01/ML-LATEX-LLNCS/?utm_source=tuicool&utm_medium=referral |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |