打开添加角色和功能向导，选中“Windows Deployment Services”:

点“安装”，就开始安装：

等待安装成功点关闭。然后打开“Windows 部署服务管理控制台”:

在Windows 部署服务控制台中，选中服务器名右击，点选“配置服务器”：

打开配置向导：点下一步：

选择：与AD集成或独立服务器，我这里选与AD集成：

选择远程安装文件夹位置：这里写D:\RemoteInstall

在下一步中，选择“响应所有客户端计算机（已知和未知）”：

等待配置完成，取消勾选“立即向服务器添加映像”：等一下我们再添加

接下来添加启动映像：点选“启动映像”---“添加启动映像”：

插入windows 安装光盘,单击“浏览”定位 到 安装光盘的：\sources\目录下选择boot.wim:

保持默认：

直到完成，添加启动映像完成：

下一步就是添加安装映像：右击“安装映像”--点选“添加安装映像”：

保持默认点下一步：

点浏览定位到安装光盘的install.wim:

选择要安装映像：

这里我只选择Windows Server 2022 Core

等待添加完成：

最后就是配置DHCP:

可以用PowerShell来配置：

$DhcpHost = 'DC'$DhcpFQDN = 'DC.afd.ink'# address of DHCP host$ScopeID  = '192.168.88.0'# address of PXE host$Option66 = '192.168.88.11'

# Set Vendor Classes:

Add-DhcpServerv4Class -Name "PXEClient (UEFI x64)" -Description "PXEClient:Arch:00007" -Type Vendor -Data "PXEClient:Arch:00007"

Add-DhcpServerv4Class -Name "PXEClient (UEFI x86)" -Description "PXEClient:Arch:00006" -Type Vendor -Data "PXEClient:Arch:00006"

Add-DhcpServerv4Class -Name "PXEClient (BIOS x86 & x64)" -Description "PXEClient:Arch:00000" -Type Vendor -Data "PXEClient:Arch:00000" 

# Create DHCP Policies (Leaving out the "ScopeId" option will make the policy a server level policy):

Add-DhcpServerv4Policy -Name "PXEClient (UEFI x64)" -Description "UEFI x64 PXE" -Condition OR -VendorClass EQ, "PXEClient (UEFI x64)*" -ComputerName $DhcpFQDN -ScopeId $ScopeID

Add-DhcpServerv4Policy -Name "PXEClient (UEFI x86)" -Description "UEFI x86 PXE" -Condition OR -VendorClass EQ, "PXEClient (UEFI x86)*" -ComputerName $DhcpFQDN -ScopeId $ScopeID

Add-DhcpServerv4Policy -Name "PXEClient (BIOS x86 & x64)" -Description "BIOS x86 & x64 PXE" -Condition OR -VendorClass EQ, "PXEClient (BIOS x86 & x64)*" -ComputerName $DhcpFQDN -ScopeId $ScopeID  # Set Policy Options (If server level policy, do not specify the "ScopeId" option):

# ....For UEFI x64

#Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x64)" -OptionId 60 -Value PXEClient

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x64)" -OptionId 66 -Value $Option66

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x64)" -OptionId 67 -Value "smsboot\x64\wdsmgfw.efi"

##for WDS PXEClient:

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x64)" -OptionId 67 -Value "boot\x64\wdsmgfw.efi"

  # ....For UEFI x86

###Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x86)" -OptionId 60 -Value PXEClient

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x86)" -OptionId 66 -Value $Option66

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x86)" -OptionId 67 -Value "smsboot\x86\wdsmgfw.efi"

###for WDS PXEClient

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (UEFI x86)" -OptionId 67 -Value "boot\x86\wdsmgfw.efi"

# ....For BIOS x86 & x64

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (BIOS x86 & x64)" -OptionId 66 -Value $Option66

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (BIOS x86 & x64)" -OptionId 67 -Value "smsboot\x64\wdsnbp.com"

###for WDS PXEClient

Set-DhcpServerv4OptionValue -ComputerName $DhcpHost -ScopeId $ScopeID -PolicyName "PXEClient (BIOS x86 & x64)" -OptionId 67 -Value "boot\x64\wdsnbp.com"

打开客户端,从网卡启动：

输入域账号和密码:

点下一页开始安装：

接下来就按正常装系统一样安装就可以。