Python |
您所在的位置:网站首页 › python画图颜色设置代码大全 › Python |
作者:触摸壹缕阳光
链接:https://zhuanlan.zhihu.com/p/33270402
来源:知乎
著作权归作者所有,转载请联系作者获得授权。
1.前言
Matplotlib是一个python的 2D绘图库,它以各种硬拷贝格式和跨平台的交互式环境生成出版质量级别的图形。通过Matplotlib,开发者可以仅需要几行代码,便可以生成绘图,直方图,功率谱,条形图,错误图,散点图等。 2.简单的使用 import matplotlib.pyplot as plt import numpy as np x = np.linspace(-1,1,50)#从(-1,1)均匀取50个点 y = 2 * x plt.plot(x,y) plt.show()![]() 我这里单拿出一个一个的对象,然后后面在进行总结。在matplotlib中,整个图表为一个figure对象。其实对于每一个弹出的小窗口就是一个Figure对象,那么如何在一个代码中创建多个Figure对象,也就是多个小窗口呢? import matplotlib.pyplot as plt import numpy as np x = np.linspace(-1,1,50) y1 = x ** 2 y2 = x * 2 #这个是第一个figure对象,下面的内容都会在第一个figure中显示 plt.figure() plt.plot(x,y1) #这里第二个figure对象 plt.figure(num = 3,figsize = (10,5)) plt.plot(x,y2) plt.show()![]() 这里需要注意的是: 我们看上面的每个图像的窗口,可以看出figure并没有从1开始然后到2,这是因为我们在创建第二个figure对象的时候,指定了一个num = 3的参数,所以第二个窗口标题上显示的figure3。对于每一个窗口,我们也可以对他们分别去指定窗口的大小。也就是figsize参数。若我们想让他们的线有所区别,我们可以用下面语句进行修改 plt.plot(x,y2,color = 'red',linewidth = 3.0,linestyle = '--')![]() 我们想更改在图表上显示x,y的取值范围: import matplotlib.pyplot as plt import numpy as np x = np.linspace(-1,1,50) y = x *2 plt.plot(x,y) plt.show()![]() ![]() 给横纵坐标设置名称: import matplotlib.pyplot as plt import numpy as np x = np.linspace(-1,1,50) y = x * 2 plt.xlabel("x'slabel")#x轴上的名字 plt.ylabel("y's;abel")#y轴上的名字 plt.plot(x,y,color='green',linewidth = 3) plt.show()![]() 把坐标轴换成不同的单位: new_ticks = np.linspace(-1,2,5) plt.xticks(new_ticks) #在对应坐标处更换名称 plt.yticks([-2,-1,0,1,2],['really bad','b','c','d','good'])![]() 那么如果我想把坐标轴上的字体更改成数学的那种形式: #在对应坐标处更换名称 plt.yticks([-2,-1,0,1,2],[r'$really\ bad$',r'$b$',r'$c\ \alpha$','d','good'])![]() 注意: 我们如果要使用空格的话需要进行对空格的转义"\ "这种转义才能输出空格;我们可以在里面加一些数学的公式,如"\alpha"来表示如何去更换坐标原点,坐标轴呢?我们在plt.show()之前: #gca = 'get current axis' #获取当前的这四个轴 ax = plt.gca() #设置脊梁(也就是包围在图标四周的默认黑线) #所以设置脊梁的时候,一共有四个方位 ax.spines['right'].set_color('r') ax.spines['top'].set_color('none') #将底部脊梁作为x轴 ax.xaxis.set_ticks_position('bottom') #ACCEPTS:['top' | 'bottom' | 'both'|'default'|'none'] #设置x轴的位置(设置底的时候依据的是y轴) ax.spines['bottom'].set_position(('data',0)) #the 1st is in 'outward' |'axes' | 'data' #axes : precentage of y axis #data : depend on y data ax.yaxis.set_ticks_position('left') # #ACCEPTS:['top' | 'bottom' | 'both'|'default'|'none'] #设置左脊梁(y轴)依据的是x轴的0位置 ax.spines['left'].set_position(('data',0))![]() 我们很多时候会再一个figures中去添加多条线,那我们如何去区分多条线呢?这里就用到了legend。 #简单的使用 l1, = plt.plot(x, y1, label='linear line') l2, = plt.plot(x, y2, color='red', linewidth=1.0, linestyle='--', label='square line') #简单的设置legend(设置位置) #位置在右上角 plt.legend(loc = 'upper right')![]() ![]() 这里需要注意的是: 如果我们没有在legend方法的参数中设置labels,那么就会使用画线的时候,也就是plot方法中的指定的label参数所指定的名称,当然如果都没有的话就会抛出异常;其实我们plt.plot的时候返回的是一个线的对象,如果我们想在handle中使用这个对象,就必须在返回的名字的后面加一个","号; legend = plt.legend(handles = [l1,l2],labels = ['hu','tang'],loc = 'upper center',shadow = True) frame = legend.get_frame() frame.set_facecolor('r')#或者0.9...![]() 在图片上加注解有两种方式: import matplotlib.pyplot as plt import numpy as np x = np.linspace(-3,3,50) y = 2*x + 1 plt.figure(num = 1,figsize =(8,5)) plt.plot(x,y) ax = plt.gca() ax.spines['right'].set_color('none') ax.spines['top'].set_color('none') #将底下的作为x轴 ax.xaxis.set_ticks_position('bottom') #并且data,以y轴的数据为基本 ax.spines['bottom'].set_position(('data',0)) #将左边的作为y轴 ax.yaxis.set_ticks_position('left') ax.spines['left'].set_position(('data',0)) print("-----方式一-----") x0 = 1 y0 = 2*x0 + 1 plt.plot([x0,x0],[0,y0],'k--',linewidth = 2.5) plt.scatter([x0],[y0],s = 50,color='b') plt.annotate(r'$2x+1 = %s$'% y0,xy = (x0,y0),xycoords = 'data', xytext=(+30,-30),textcoords = 'offset points',fontsize = 16 ,arrowprops = dict(arrowstyle='->', connectionstyle="arc3,rad=.2")) plt.show()![]() 注意: xy就是需要进行注释的点的横纵坐标;xycoords = 'data'说明的是要注释点的xy的坐标是以横纵坐标轴为基准的;xytext=(+30,-30)和textcoords='data'说明了这里的文字是基于标注的点的x坐标的偏移+30以及标注点y坐标-30位置,就是我们要进行注释文字的位置;fontsize = 16就说明字体的大小;arrowprops = dict()这个是对于这个箭头的描述,arrowstyle='->'这个是箭头的类型,connectionstyle="arc3,rad=.2"这两个是描述我们的箭头的弧度以及角度的。 print("-----方式二-----") plt.text(-3.7,3,r'$this\ is\ the\ some\ text. \mu\ \sigma_i\ \alpha_t$', fontdict={'size':16,'color':'r'})![]() 这里先介绍一下plot中的一个参数: import matplotlib.pyplot as plt import numpy as np x = np.linspace(-3,3,50) y1 = 0.1*x y2 = x**2 plt.figure() #zorder控制绘图顺序 plt.plot(x,y1,linewidth = 10,zorder = 2,label = r'$y_1\ =\ 0.1*x$') plt.plot(x,y2,linewidth = 10,zorder = 1,label = r'$y_2\ =\ x^{2}$') plt.legend(loc = 'lower right') plt.show()![]() 如果改成: #zorder控制绘图顺序 plt.plot(x,y1,linewidth = 10,zorder = 1,label = r'$y_1\ =\ 0.1*x$') plt.plot(x,y2,linewidth = 10,zorder = 2,label = r'$y_2\ =\ x^{2}$')![]() 下面我们看一下这个图: import matplotlib.pyplot as plt import numpy as np x = np.linspace(-3,3,50) y1 = 0.1*x y2 = x**2 plt.figure() #zorder控制绘图顺序 plt.plot(x,y1,linewidth = 10,zorder = 1,label = r'$y_1\ =\ 0.1*x$') plt.plot(x,y2,linewidth = 10,zorder = 2,label = r'$y_2\ =\ x^{2}$') plt.ylim(-2,2) ax = plt.gca() ax.spines['right'].set_color('none') ax.spines['top'].set_color('none') ax.xaxis.set_ticks_position('bottom') ax.spines['bottom'].set_position(('data',0)) ax.yaxis.set_ticks_position('left') ax.spines['left'].set_position(('data',0)) plt.show()![]() 从上面看,我们可以看见我们轴上的坐标被掩盖住了,那么我们怎么去修改他呢? print(ax.get_xticklabels()) print(ax.get_yticklabels()) for label in ax.get_xticklabels() + ax.get_yticklabels(): label.set_fontsize(12) label.set_bbox(dict(facecolor = 'white',edgecolor='none',alpha = 0.8,zorder = 2))![]() 这里需要注意: ax.get_xticklabels()获取得到就是坐标轴上的数字;set_bbox()这个bbox就是那坐标轴上的数字的那一小块区域,从结果我们可以很明显的看出来;facecolor = 'white',edgecolor='none,第一个参数表示的这个box的前面的背景,边上的颜色。 7.画图的种类1.scatter散点图 import matplotlib.pyplot as plt import numpy as np n = 1024 X = np.random.normal(0,1,n) Y = np.random.normal(0,1,n) T = np.arctan2(Y,X)#for color later on plt.scatter(X,Y,s = 75,c = T,alpha = .5) plt.xlim((-1.5,1.5)) plt.xticks([])#ignore xticks plt.ylim((-1.5,1.5)) plt.yticks([])#ignore yticks plt.show()![]() 2.柱状图 import matplotlib.pyplot as plt import numpy as np n = 12 X = np.arange(n) Y1 = (1 - X/float(n)) * np.random.uniform(0.5,1.0,n) Y2 = (1 - X/float(n)) * np.random.uniform(0.5,1.0,n) #facecolor:表面的颜色;edgecolor:边框的颜色 plt.bar(X,+Y1,facecolor = '#9999ff',edgecolor = 'white') plt.bar(X,-Y2,facecolor = '#ff9999',edgecolor = 'white') #描绘text在图表上 # plt.text(0 + 0.4, 0 + 0.05,"huhu") for x,y in zip(X,Y1): #ha : horizontal alignment #va : vertical alignment plt.text(x + 0.01,y+0.05,'%.2f'%y,ha = 'center',va='bottom') for x,y in zip(X,Y2): # ha : horizontal alignment # va : vertical alignment plt.text(x+0.01,-y-0.05,'%.2f'%(-y),ha='center',va='top') plt.xlim(-.5,n) plt.yticks([]) plt.ylim(-1.25,1.25) plt.yticks([]) plt.show()![]() 3.Contours等高线图 import matplotlib.pyplot as plt import numpy as np def f(x,y): #the height function return (1-x/2 + x**5+y**3) * np.exp(-x **2 -y**2) n = 256 x = np.linspace(-3,3,n) y = np.linspace(-3,3,n) #meshgrid函数用两个坐标轴上的点在平面上画网格。 X,Y = np.meshgrid(x,y) #use plt.contourf to filling contours #X Y and value for (X,Y) point #这里的8就是说明等高线分成多少个部分,如果是0则分成2半 #则8是分成10半 #cmap找对应的颜色,如果高=0就找0对应的颜色值, plt.contourf(X,Y,f(X,Y),8,alpha = .75,cmap = plt.cm.hot) #use plt.contour to add contour lines C = plt.contour(X,Y,f(X,Y),8,colors = 'black',linewidth = .5) #adding label plt.clabel(C,inline = True,fontsize = 10) #ignore ticks plt.xticks([]) plt.yticks([]) plt.show()![]() 4.image图片 import matplotlib.pyplot as plt import numpy as np #image data a = np.array([0.313660827978, 0.365348418405, 0.423733120134, 0.365348418405, 0.439599930621, 0.525083754405, 0.423733120134, 0.525083754405, 0.651536351379]).reshape(3,3) ''' for the value of "interpolation",check this: http://matplotlib.org/examples/images_contours_and_fields/interpolation_methods.html for the value of "origin"= ['upper', 'lower'], check this: http://matplotlib.org/examples/pylab_examples/image_origin.html ''' #显示图像 #这里的cmap='bone'等价于plt.cm.bone plt.imshow(a,interpolation = 'nearest',cmap = 'bone' ,origin = 'up') #显示右边的栏 plt.colorbar(shrink = .92) #ignore ticks plt.xticks([]) plt.yticks([]) plt.show()![]() 5.3D数据 import numpy as np import matplotlib.pyplot as plt from mpl_toolkits.mplot3d import Axes3D fig = plt.figure() ax = Axes3D(fig) #X Y value X = np.arange(-4,4,0.25) Y = np.arange(-4,4,0.25) X,Y = np.meshgrid(X,Y) R = np.sqrt(X**2 + Y**2) #hight value Z = np.sin(R) ax.plot_surface(X, Y, Z, rstride=1, cstride=1, cmap=plt.get_cmap('rainbow')) """ ============= ================================================ Argument Description ============= ================================================ *X*, *Y*, *Z* Data values as 2D arrays *rstride* Array row stride (step size), defaults to 10 *cstride* Array column stride (step size), defaults to 10 *color* Color of the surface patches *cmap* A colormap for the surface patches. *facecolors* Face colors for the individual patches *norm* An instance of Normalize to map values to colors *vmin* Minimum value to map *vmax* Maximum value to map *shade* Whether to shade the facecolors ============= ================================================ """ # I think this is different from plt12_contours ax.contourf(X, Y, Z, zdir='z', offset=-2, cmap=plt.get_cmap('rainbow')) """ ========== ================================================ Argument Description ========== ================================================ *X*, *Y*, Data values as numpy.arrays *Z* *zdir* The direction to use: x, y or z (default) *offset* If specified plot a projection of the filled contour on this position in plane normal to zdir ========== ================================================ """ ax.set_zlim(-2, 2) plt.show()![]() 1.使用subplot函数 import matplotlib.pyplot as plt plt.figure(figsize = (6,5)) ax1 = plt.subplot(3,1,1) ax1.set_title("ax1 title") plt.plot([0,1],[0,1]) #这种情况下如果再数的话以334为标准了, #把上面的第一行看成是3个列 ax2 = plt.subplot(334) ax2.set_title("ax2 title") ax3 = plt.subplot(335) ax4 = plt.subplot(336) ax5 = plt.subplot(325) ax6 = plt.subplot(326) plt.show()![]() ![]() 2.分格显示 #method 1: subplot2grid import matplotlib.pyplot as plt plt.figure() #第一个参数shape也就是我们网格的形状 #第二个参数loc,位置,这里需要注意位置是从0开始索引的 #第三个参数colspan跨多少列,默认是1 #第四个参数rowspan跨多少行,默认是1 ax1 = plt.subplot2grid((3,3),(0,0),colspan = 3,rowspan = 1) #如果为他设置一些属性的话,如plt.title,则用ax1的话 #ax1.set_title(),同理可设置其他属性 ax1.set_title("ax1_title") ax2 = plt.subplot2grid((3,3),(1,0),colspan = 2,rowspan = 1) ax3 = plt.subplot2grid((3,3),(1,2),colspan = 1,rowspan = 2) ax4 = plt.subplot2grid((3,3),(2,0),colspan = 1,rowspan = 1) ax5 = plt.subplot2grid((3,3),(2,1),colspan = 1,rowspan = 1) plt.show()![]() ![]() ![]() 3.图中图 import matplotlib.pyplot as plt fig = plt.figure() x = [1,2,3,4,5,6,7] y = [1,3,4,2,5,8,6] #below are all percentage left, bottom, width, height = 0.1, 0.1, 0.8, 0.8 #使用plt.figure()显示的是一个空的figure #如果使用fig.add_axes会添加轴 ax1 = fig.add_axes([left, bottom, width, height])# main axes ax1.plot(x,y,'r') ax1.set_xlabel('x') ax1.set_ylabel('y') ax1.set_title('title') ax2 = fig.add_axes([0.2, 0.6, 0.25, 0.25]) # inside axes ax2.plot(y, x, 'b') ax2.set_xlabel('x') ax2.set_ylabel('y') ax2.set_title('title inside 1') # different method to add axes #################################### plt.axes([0.6, 0.2, 0.25, 0.25]) plt.plot(y[::-1], x, 'g') plt.xlabel('x') plt.ylabel('y') plt.title('title inside 2') plt.show()![]() 4.次坐标轴 # 使用twinx是添加y轴的坐标轴 # 使用twiny是添加x轴的坐标轴 import matplotlib.pyplot as plt import numpy as np x = np.arange(0,10,0.1) y1 = 0.05 * x ** 2 y2 = -1 * y1 fig,ax1 = plt.subplots() ax2 = ax1.twinx() ax1.plot(x,y1,'g-') ax2.plot(x,y2,'b-') ax1.set_xlabel('X data') ax1.set_ylabel('Y1 data',color = 'g') ax2.set_ylabel('Y2 data',color = 'b') plt.show()![]() ![]() |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |