Nxtop PPI |
您所在的位置：网站首页 › ppi63 › Nxtop PPI |
Nxtop PPI
|
Size:PPI63 SA float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device. It can be easily converted from normally open to normally close by inverting the float. Product Features Thread Dia(Approx): 9.5mm / 0.374"; Switch Body Size: 24 x 77.5mm / 0.944" x 3.05"(Max D*H); Cable Length: 36cm / 14.2" Suggested use voltage: 24VDC, please use this voltage if possible. Note: Because the current that the switch can carry is much little(0.5A), Pls Don't connect to DC 220V/110V directly, you must use a relay or contactor when it is connected by a load, relay or contactor are not included here. Pls don't connect the float switch to solenoid valve, motor directly, it may damage the switch. Use parallel connection to protect the switch. Max Switching Voltage: 100V-220V DC; Max Switching Current: 0.5A /0.7A; Max Contact Resistance: 100m ohm. Effective water level 63mm/2.48" Related Products: Saim 6 Pcs Pieces ZP4510 Liquid Water Level Sensor Vertical Float Switches
 Nxtop PPI-52 Liquid Water Level Sensor Vertical Float Switches Pack of 5
 Nxtop PPI-35 Liquid Water Level Sensor Vertical Float Switches Pack of 5
 Nxtop 6Pcs Pieces Water Level Sensor ZP4510 Liquid Water Level Sensor Vertical Float Switches
|
【本文地址】