Failed to init device error while manualy installing the firmware · Issue #156 · juribeparada/MMDVM

您所在的位置:网站首页 mmdvmhost Failed to init device error while manualy installing the firmware · Issue #156 · juribeparada/MMDVM

Failed to init device error while manualy installing the firmware · Issue #156 · juribeparada/MMDVM

#Failed to init device error while manualy installing the firmware · Issue #156 · juribeparada/MMDVM| 来源: 网络整理| 查看: 265

Hello.

I have got an error trying to manualy installing the MMDVM firmware on pi-star. The board is an hs dual hat. The firmware compiling runs without error but when trying to install, results on "Failed to init device, timeout" message. What am I missing?

pi-star@pi-star(rw):MMDVM_HS$ sudo pistar-watchdog.service stop Killing pistar-watchdog PID 1288 pi-star@pi-star(rw):MMDVM_HS$ sudo systemctl stop mmdvmhost.timer pi-star@pi-star(rw):MMDVM_HS$ sudo systemctl stop mmdvmhost.service pi-star@pi-star(rw):MMDVM_HS$ sudo make mmdvm_hs_dual_hat /usr/local/bin/stm32flash -v -w bin/mmdvm_f1.bin -g 0x0 -R -i 20,-21,21:-20,21 /dev/ttyAMA0 stm32flash 0.7

http://stm32flash.sourceforge.net/

Using Parser : Raw BINARY Size : 57032 Interface serial_posix: 57600 8E1

GPIO sequence start setting gpio 20 to 1... OK delay 100000 us setting gpio 21 to 0... OK delay 100000 us setting gpio 21 to 1... OK GPIO sequence end

Failed to init device, timeout.

GPIO sequence start setting gpio 20 to 0... OK delay 100000 us setting gpio 21 to 1... OK GPIO sequence end

make: *** [Makefile:484: zumspot-pi] Error 1

73 de PY2OC, Luiz



【本文地址】


今日新闻


推荐新闻


CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3