关于Ubantu系统中蓝牙问题及一些解决思路 |
您所在的位置:网站首页 › linux蓝牙鼠标无法使用 › 关于Ubantu系统中蓝牙问题及一些解决思路 |
当我们想要在Ubantu系统(可能别的系统也会遇到)中打开蓝牙的时候,可能会提示: 1.没有检测到蓝牙适配器 / 蓝牙守护进程未启动 / BlueZ未运行 等等信息。这时我们可以用命令: systemctl status bluetooth.service 来检查我们的蓝牙服务是否处于运行状态。 如果提示: ● bluetooth.service - Bluetooth service Loaded: loaded(/usr/lib/systemd/system/bluetooth.service; disabled; vendor preset: disabled) Active: inactive (dead) Docs: man:bluetoothd(8)那么很明显我们的蓝牙服务已经失效,需要激活一下,激活也很简单,只需要两行命令即可。 sudo modprobe btusb sudo systemctl start bluetooth.service sudo systemctl enable bluetooth.service sudo modprobe btusb //加载通用的蓝牙驱动程序 sudo systemctl start bluetooth.service //启动蓝牙服务 sudo systemctl enable bluetooth.service //使蓝牙服务开机自启 此时再用我们的检测命令,就能看到: 2021/10/26 更新两种蓝牙错误情况: 2.rfkill报错使用命令查询蓝牙状态 systemctl status bluetooth.service 会看到报错提示: Failed to set mode:Blocked through rfkill(0x12)//这种情况大致可以理解为蓝牙被rfkill设备(/dev/rfkill?)阻止/封锁了 解决方法为: sudo rfkill unblock bluetooth sudo systemctl restart bluetooth sudo rfkill unblock bluetooth //使得rfkill解除对蓝牙服务的封锁 sudo systemctl start bluetooth.service //重启蓝牙服务 3.hci0设备报错使用命令查询蓝牙状态 systemctl status bluetooth.service 会看到 loadin LTKs timed out for hci0解决方法为: sudo hciconfig hci0 down sudo rmmod btusb sudo modprobe btusb sudo hciconfig hci0 up sudo systemctl restart bluetooth.service sudo hciconfig hci0 down //配置hci0蓝牙设备关闭 sudo rmmod btusb //移除btusb蓝牙模块 sudo modprobe btusb //重新加载btusb蓝牙模块 sudo hciconfig hci0 up //配置hci0蓝牙设备启动 sudo systemctl start bluetooth.service //重启蓝牙服务 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |