linux时间和时区修改(附suse) |
您所在的位置:网站首页 › linux修改时间为北京时间怎么改回来 › linux时间和时区修改(附suse) |
1、查看系统时间 [root@test3 ~]# date Thu Dec 20 23:25:33 CST 2012 [root@test3 ~]# date +"%Y%m%d %H:%m:%S" 20121220 23:12:54 2、查看硬件时间 系统时钟是指当前Linux Kernel中的时钟,而硬件时钟则是主板上由电池供电的时钟,这个硬件时钟可以在BIOS中进行设置。当Linux启动时,硬件时钟会去读取系统时钟的设置,然后系统时钟就会独立于硬件运作。 [root@test3 ~]# hwclock Thu 20 Dec 2012 02:57:09 PM CST -0.176702 seconds [root@test3 ~]# clock Thu 20 Dec 2012 02:57:14 PM CST -0.575501 seconds 3、修改系统时间 [root@test3 ~]# date Thu Dec 20 23:27:43 CST 2012 [root@test3 ~]# date -s "20121220 15:28:00" Thu Dec 20 15:28:00 CST 2012 [root@test3 ~]# date Thu Dec 20 15:28:03 CST 2012 4、修改硬件时间 [root@test3 ~]# hwclock Thu 20 Dec 2012 03:30:58 PM CST -0.119534 seconds [root@test3 ~]# hwclock --set --date="20121220 23:31:00" [root@test3 ~]# hwclock Thu 20 Dec 2012 11:31:08 PM CST -0.451844 seconds 5、系统时间与硬件时间之间的同步 系统时间同步到硬件时间:hwclock -w OR hwclock -- systohc 硬件时间同步到系统时间:hwclock -s OR hwclock -- hctosys [root@test3 ~]# date Thu Dec 20 15:39:08 CST 2012 [root@test3 ~]# hwclock Thu 20 Dec 2012 11:36:25 PM CST -0.661838 seconds [root@test3 ~]# hwclock -w [root@test3 ~]# hwclock Thu 20 Dec 2012 03:39:25 PM CST -0.090384 seconds 6、查看当前时区 [root@test3 ~]# date -R Thu, 20 Dec 2012 15:41:24 +0800 [root@test3 ~]# cat /etc/sysconfig/clock |grep -i zone # The ZONE parameter is only evaluated by system-config-date. # The timezone of the system is defined by the contents of /etc/localtime. ZONE="Asia/Shanghai" 7、修改当前时区 方法一、[root@test3 ~]# timeconfig 界面化修改,仅适用于RHEL 方法二、修改/etc/localtime文件,该文件定义了Local Time Zone [root@test3 ~]# date -R Thu, 20 Dec 2012 15:46:51 +0800 [root@test3 ~]# mv /etc/localtime /etc/localtime.bak [root@test3 ~]# cp /usr/share/zoneinfo/America/New_York /etc/localtime [root@test3 ~]# date -R Thu, 20 Dec 2012 02:47:40 -0500 [root@test3 ~]# cat /etc/sysconfig/clock |grep -i zone # The ZONE parameter is only evaluated by system-config-date. # The timezone of the system is defined by the contents of /etc/localtime. ZONE="Asia/Shanghai" 修改成功,但/etc/sysconfig/clock文件中的timezone未变。 方法三、设置TZ环境变量 [root@test3 ~]# date -R Thu, 20 Dec 2012 02:53:15 -0500 [root@test3 ~]# echo "export TZ=Asia/Shanghai" >>/etc/profile [root@test3 ~]# cat /etc/profile |grep TZ export TZ=Asia/Shanghai [root@test3 ~]# source /etc/profile [root@test3 ~]# date -R Thu, 20 Dec 2012 15:54:47 +0800 $TZ环境变量的优先级要比/etc/localtime要高,并且在设置该全局环境变量后,即使使用timeconfig来修改也一样无法改变时区。 8、查看当前相应时区时间 查看-5区当前时间 [root@test3 ~]# zdump GMT-5 GMT-5 Thu Dec 20 12:59:13 2012 GMT 9、suse时间与时区的修改 suse时间的修改与redhat linux相同,具体方法参照以上操作; suse时区的交互式界面修改方法yast---system---Date and Time找到合适的时区,确定进行修改。 10、附相关缩写含义 CST:CST同时可以代表如下 4 个不同的时区: Central Standard Time (USA) UT-6:00 Central Standard Time (Australia) UT+9:30 China Standard Time UT+8:00 Cuba Standard Time UT-4:00 可见,CST可以同时表示美国,澳大利亚,中国,古巴四个国家的标准时间。 EDT - Eastern Daylight Time 东部夏令时间 CDT - Central Daylight Time 中部夏令时间 UTC:协调世界时,又称世界标准时间或世界协调时间,简称UTC,从英文“Coordinated Universal Time” 称为世界统一时间。
|
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |