Hey everyone,First of all my knowledge in this field is very simple, so please bear with me.I need help figuring out why I can’t access the web configuration page, let me explain.The switch is connected to a server (Storenator from 45Drives.com), we installed on each PC PCI Express network: Intel® Ethernet Converged Network Adapter X550-T2The switch is working; it's connecting our server (data storage aka Storenator from 45Drives.com) to the PCs. however, the speed is extremely low, the copying speed is 11MB/ps as it supposed to be 1250MB/ps max (10Gbps). And this is happening with 2 PCs so that tells me it’s not the PC.To find the bottleneck, I double-checked the drivers are up-to-date, the cables are fine and there is no issue from the server-side, the only missing thing is configuring the switch, I have tried to connect using the default IP but got nothingThe switch (as far as I know) hasn't been configured, just unboxed, connected without any configuration.I have connected a laptop to the switch and used PuTTY with no success.Connected a cable to the backport where it reads “Console” but that didn’t work too.I can access the server, which means there is a connection between the server, the switch, and the client, the only problem is with the connection speed.Do I have to reset the switch and try again?What the worst could happen if I hit the reset button?Please helpI should mention this as it may help somehow:The Power LED "System" is blinking.The left (yellow) LED on ports are blinkingSome images attachedMy switch is Cisco SG300-28PP 28-port Gigabit PoE+ Managed Switch Cables are CAT610Gb Adapter Intel® Ethernet Converged Network Adapter X550-T2PCs are running Windows 10