华三交换机irf堆叠配置 |
您所在的位置：网站首页 › fortyGigE接口 › 华三交换机irf堆叠配置 |
华三交换机irf堆叠配置
|
两台交换机堆叠 Core1配置： [Core1]int range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/52 [Core1-if-range]shutdown [Core1]irf member 1 priority 5 [Core1]irf-port 1/1 //创建irf虚拟接口 [Core1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/49 //irf虚拟接口与物理端口绑定 You must perform the following tasks for a successful IRF setup: Save the configuration after completing IRF configuration. Execute the "irf-port-configuration active" command to activate the IRF ports. //为了成功设置IRF，你必须执行以下任务: //完成IRF配置后，请保存配置。 //执行“IRF -port-configuration active”命令激活IRF端口。 [Core1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/50 [Core1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/51 [Core1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/52 [Core1-irf-port1/1]qu [Core1]irf-port-configuration active [Core1] [Core1]int range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/52 [Core1-if-range]undo shutdownCore2配置： [Core2]irf member 1 renumber 2 Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y Please reboot the device for the new member ID to take effect. //重命名成员标号后需要重启 [Core2]int range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/52 [Core2-if-range]shutdown [Core2-if-range]qu [Core2]irf member 2 priority 1 [Core2]irf-port 2/2 [Core2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/49 You must perform the following tasks for a successful IRF setup: Save the configuration after completing IRF configuration. Execute the "irf-port-configuration active" command to activate the IRF ports. [Core2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/50 [Core2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/51 [Core2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/52 [Core2-irf-port2/2]qu [Core2] [Core2]irf-port-configuration active [Core2]int range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/52 [Core2-if-range]shutdownirf配置成功 [Core1]%Nov 1 23:31:30:623 2021 Core1 DEV/2/BOARD_STATE_FAULT: Board state changed to Fault on slot 2, type is unknown. %Nov 1 23:31:32:327 2021 Core1 DEV/5/BOARD_STATE_NORMAL: Board state changed to Normal on slot 2, type is H3C S6850. %Nov 1 23:31:54:977 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/49 (IfIndex 50), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet2/0/49. %Nov 1 23:31:54:978 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/50 (IfIndex 51), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet2/0/50. %Nov 1 23:31:54:803 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=2; Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/49 (IfIndex 178), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet1/0/49. %Nov 1 23:31:54:804 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=2; Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/50 (IfIndex 179), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet1/0/50. %Nov 1 23:31:54:983 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/51 (IfIndex 52), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet2/0/51. %Nov 1 23:31:54:863 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=2; Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/51 (IfIndex 180), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet1/0/51. %Nov 1 23:31:55:161 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/52 (IfIndex 53), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet2/0/52. %Nov 1 23:31:55:064 2021 Core1 LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=2; Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/52 (IfIndex 181), neighbor's chassis ID is 8878-15d6-0500, port ID is Ten-GigabitEthernet1/0/52.查看irf: dis irf MemberID Role Priority CPU-Mac Description *+1 Master 5 8878-15d6-0504 --- 2 Standby 1 8878-1aae-0604 --- -------------------------------------------------- * indicates the device is the master. + indicates the device through which the user logs in. //“*”表示主设备 //“+”表示用户登录的设备。 The bridge MAC of the IRF is: 8878-15d6-0500 Auto upgrade : yes Mac persistent : 6 min Domain ID : 0查看接口： dis int b Brief information on interfaces in route mode: Link: ADM - administratively down; Stby - standby Protocol: (s) - spoofing Interface Link Protocol Primary IP Description InLoop0 UP UP(s) -- MGE0/0/0 DOWN DOWN -- NULL0 UP UP(s) -- REG0 UP -- -- Brief information on interfaces in bridge mode: Link: ADM - administratively down; Stby - standby Speed: (a) - auto Duplex: (a)/A - auto; H - half; F - full Type: A - access; T - trunk; H - hybrid Interface Link Speed Duplex Type PVID Description FGE1/0/53 DOWN 40G A A 1 FGE1/0/54 DOWN 40G A A 1 FGE2/0/53 DOWN 40G A A 1 FGE2/0/54 DOWN 40G A A 1 GE1/0/1 DOWN auto F A 1 GE1/0/2 DOWN auto F A 1 GE1/0/3 DOWN auto F A 1 GE1/0/4 DOWN auto F A 1 GE1/0/5 DOWN auto F A 1 GE1/0/6 DOWN auto F A 1 GE1/0/7 DOWN auto F A 1 GE1/0/8 DOWN auto F A 1 GE1/0/9 DOWN auto F A 1 GE1/0/10 DOWN auto F A 1 GE1/0/11 DOWN auto F A 1 GE1/0/12 DOWN auto F A 1 GE1/0/13 DOWN auto F A 1 GE1/0/14 DOWN auto F A 1 GE1/0/15 DOWN auto F A 1 GE1/0/16 DOWN auto F A 1 GE1/0/17 DOWN auto F A 1 GE1/0/18 DOWN auto F A 1 GE1/0/19 DOWN auto F A 1 GE1/0/20 DOWN auto F A 1 GE1/0/21 DOWN auto F A 1 GE1/0/22 DOWN auto F A 1 GE1/0/23 DOWN auto F A 1 GE1/0/24 DOWN auto F A 1 GE1/0/25 DOWN auto F A 1 GE1/0/26 DOWN auto F A 1 GE1/0/27 DOWN auto F A 1 GE1/0/28 DOWN auto F A 1 GE1/0/29 DOWN auto F A 1 GE1/0/30 DOWN auto F A 1 GE1/0/31 DOWN auto F A 1 GE1/0/32 DOWN auto F A 1 GE1/0/33 DOWN auto F A 1 GE1/0/34 DOWN auto F A 1 GE1/0/35 DOWN auto F A 1 GE1/0/36 DOWN auto F A 1 GE1/0/37 DOWN auto F A 1 GE1/0/38 DOWN auto F A 1 GE1/0/39 DOWN auto F A 1 GE1/0/40 DOWN auto F A 1 GE1/0/41 DOWN auto F A 1 GE1/0/42 DOWN auto F A 1 GE1/0/43 DOWN auto F A 1 GE1/0/44 DOWN auto F A 1 GE1/0/45 DOWN auto F A 1 GE1/0/46 DOWN auto F A 1 GE1/0/47 DOWN auto F A 1 GE1/0/48 DOWN auto F A 1 GE2/0/1 DOWN auto F A 1 GE2/0/2 DOWN auto F A 1 GE2/0/3 DOWN auto F A 1 GE2/0/4 DOWN auto F A 1 GE2/0/5 DOWN auto F A 1 GE2/0/6 DOWN auto F A 1 GE2/0/7 DOWN auto F A 1 GE2/0/8 DOWN auto F A 1 GE2/0/9 DOWN auto F A 1 GE2/0/10 DOWN auto F A 1 GE2/0/11 DOWN auto F A 1 GE2/0/12 DOWN auto F A 1 GE2/0/13 DOWN auto F A 1 GE2/0/14 DOWN auto F A 1 GE2/0/15 DOWN auto F A 1 GE2/0/16 DOWN auto F A 1 GE2/0/17 DOWN auto F A 1 GE2/0/18 DOWN auto F A 1 GE2/0/19 DOWN auto F A 1 GE2/0/20 DOWN auto F A 1 GE2/0/21 DOWN auto F A 1 GE2/0/22 DOWN auto F A 1 GE2/0/23 DOWN auto F A 1 GE2/0/24 DOWN auto F A 1 GE2/0/25 DOWN auto F A 1 GE2/0/26 DOWN auto F A 1 GE2/0/27 DOWN auto F A 1 GE2/0/28 DOWN auto F A 1 GE2/0/29 DOWN auto F A 1 GE2/0/30 DOWN auto F A 1 GE2/0/31 DOWN auto F A 1 GE2/0/32 DOWN auto F A 1 GE2/0/33 DOWN auto F A 1 GE2/0/34 DOWN auto F A 1 GE2/0/35 DOWN auto F A 1 GE2/0/36 DOWN auto F A 1 GE2/0/37 DOWN auto F A 1 GE2/0/38 DOWN auto F A 1 GE2/0/39 DOWN auto F A 1 GE2/0/40 DOWN auto F A 1 GE2/0/41 DOWN auto F A 1 GE2/0/42 DOWN auto F A 1 GE2/0/43 DOWN auto F A 1 GE2/0/44 DOWN auto F A 1 GE2/0/45 DOWN auto F A 1 GE2/0/46 DOWN auto F A 1 GE2/0/47 DOWN auto F A 1 GE2/0/48 DOWN auto F A 1 XGE1/0/49 UP 10G F -- -- XGE1/0/50 UP 10G F -- -- XGE1/0/51 UP 10G F -- -- XGE1/0/52 UP 10G F -- -- XGE2/0/49 UP 10G F -- -- XGE2/0/50 UP 10G F -- -- XGE2/0/51 UP 10G F -- -- XGE2/0/52 UP 10G F -- -- |
注意事项： 1、推荐使用万兆口进行堆叠 2、配置完成后需要用命令"irf-port-configuration active"激活 3、实际操作中，先配置完，最后进行插线缆【本文地址】
今日新闻 |
推荐新闻 |