GitHub

2023-01-08 18:29| 来源: 网络整理| 查看: 265

IxMilia.Dxf

A .NET library for reading and writing DXF and DXB files. Clone and build locally or directly consume the NuGet package.

Usage

Open a DXF file:

using System.IO; using IxMilia.Dxf; using IxMilia.Dxf.Entities; // ... DxfFile dxfFile = DxfFile.Load(@"C:\Path\To\File.dxf"); foreach (DxfEntity entity in dxfFile.Entities) { switch (entity.EntityType) { case DxfEntityType.Line: DxfLine line = (DxfLine)entity; // ... break; // ... } }

Save a DXF file:

using System.IO; using IxMilia.Dxf; using IxMilia.Dxf.Entities; // ... DxfFile dxfFile = new DxfFile(); dxfFile.Entities.Add(new DxfLine(new DxfPoint(0, 0, 0), new DxfPoint(50, 50, 0))); // ... dxfFile.Save(@"C:\Path\To\File.dxf"); Compatibility Reading Files

This library should be able to open any valid DXF file, including files produced by AutoCAD or anything using the ODA libraries from the Open Design Alliance, including Microsoft Visio which uses older Open Design libraries.

Open Design Alliance (ODA)

The ODA libraries should be able to open anything produced by this library.

AutoCAD

AutoCAD is rather fussy with what it will accept as valid DXF, even though the official spec is rather loose. If you use this library to write a file that AutoCAD can't open, file an issue with the drawing (or a sample) that was produced by this library. I've found that AutoCAD compatibility can be greatly improved by doing the following:

// assuming `dxfFile` is a valid `DxfFile` object dxfFile.Header.SetDefaults(); dxfFile.ViewPorts.Clear(); dxfFile.Save(...);

There are also some entity types that AutoCAD might not open when written by this library, specifically:

3DSOLID (Dxf3DSolid) ACAD_PROXY_ENTITY (DxfProxyEntity) ATTRIB (DxfAttribute) ATTDEF (DxfAttributeDefinition) BODY (DxfBody) DIMENSION (DxfAlignedDimension, DxfAngularThreePointDimension, DxfDiameterDimension, DxfOrdinateDimension, DxfRadialDimension, DxfRotatedDimension) HELIX (DxfHelix) LIGHT (DxfLight) MTEXT (DxfMText) REGION (DxfRegion) SHAPE (DxfShape) TOLERANCE (DxfTolerance)

And the following entities might not open in AutoCAD if written with missing information, e.g., a LEADER (DxfLeader) requires at least 2 vertices.

INSERT (DxfInsert) LEADER (DxfLeader) MLINE (DxfMLine) DGNUNDERLAY (DxfDgnUnderlay) DWFUNDERLAY (DxfDwfUnderlay) PDFUNDERLAY (DxfPdfUnderlay) SPLINE (DxfSpline) VERTEX (DxfVertex)

Also note that AutoCAD doesn't seem to like R13 files written by IxMilia. For the greatest chance of compatibility, save the file as either R12 or the newest version possible (e.g., R2013 or R2010.)

Status

Support for DXF files is complete from versions R10 through R2014 EXCEPT for the following entities:

MESH MLEADER SURFACE TABLE VIEWPORT Building locally

To build locally, install the latest .NET 5.0 SDK.

DXF Reference

Since I don't want to fall afoul of Autodesk's lawyers, this repo can't include the actual DXF documentation. It can, however contain links to the official documents that I've been able to scrape together. For most scenarios the latest documentation should suffice, but all other versions are included here for backwards compatibility and reference between versions.

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007 (Autodesk's link erroneously points to the R2008 documentation)

2006

2005

2004

2002

2000

R14

R13 (self-extracting 16-bit executable)

R12 (non-Autodesk source)

R11 (differences between R10 and R11)

R10 (non-Autodesk source)

The 2015-2020 spec can be downloaded for offline use via the ReferenceCollector.

Many earlier links were compiled from an archive.org May 9, 2013 snapshot

【本文地址】

GitHub

GitHub

今日新闻

推荐新闻