Linksys E4200 v1

您所在的位置：网站首页 › ea4200v1 › Linksys E4200 v1

Linksys E4200 v1

#Linksys E4200 v1| 来源: 网络整理| 查看: 265

multiple revisions of this device, use cautionabgn (AN750) Maximum Performance Dual-Band N Router

Support Support page Wikipedia Linksys routersWikiDevi.wi-cat.ru Linksys E4200 v1 3rd Party Firmwaredd-wrt SupportedOpenWrt Status UnknownTomato any flavor SupportedGargoyle Status UnknownPlatformBrand • Model • Rev Linksys E4200 v1 Serial number prefix 01C10CFCC ID Q87-E4200IC ID 3839A-E4200Type wireless routerCPU1 Broadcom BCM4718A1CPU1 Type MIPS 74KcCPU1 Speed 480 MHz Flash1 Chip Winbond W25Q128BVFGFlash1 Size 16 MiB16,777,216 B 131,072 Kib 16,384 KiB 128 Mib 0.0156 GiB RAM1 Size 64 MiB67,108,864 B 524,288 Kib 65,536 KiB 512 Mib 0.0625 GiB RAM1 Chip Winbond W9751G6JB-3ETH chip1 Broadcom BCM4718A1Switch Broadcom BCM53115Ethernet Port Count 1-1GbE-WAN4-1GbE-LAN

802dot11 OUI: 58:6D:8F (8 E, 8 W), C0:C1:C0 (12 E, 13 W)Ethernet OUI: 58:6D:8F (8 E, 8 W), C0:C1:C0 (12 E, 13 W)

Stock bootloader CFE Stock FW OS Linux Expansion IF types USB 2.0USB ports 1USB Hub Compatible UntestedPower 12 VDC, 2 AConnector type barrel

Additional chips2.4GHz Power Amplifier IC;Skyworks;SE2528L;SiGe, 2528L, 108EC;2;2.4/5GHz Front End Module;Skyworks;SE2594L;SiGe, SE2594L, 109HD;3;

Other

Default SSID: CiscoXXXXX (6 addl. devices)Default IP address: 192.168.1.1the IP 192.168.1.1 is used by 1293 additional devicesof which 153 are Linksys devicesDefault login user: blankDefault login password: adminblank:admin credentials used by 263 additional devicesof which 134 are Linksys devices

Manuf/OEM/ODM CyberTAN 3rd Party Firmware Support DD-WRT • (List), Tomato (Shibby) • (List | DLs), TomatoUSB RAF (Victek) • (List | DLs)RetailAvailability commonFCC approval date 20 October 2010(Est.) release date 19 January 2011UPC 745883590438 (UPC DB, On eBay)ASIN B004K1EZDS

Country of manuf ChinaRadio 1Chip1 Broadcom BCM4718A1Wireless interface OUI 58:6D:8F, C0:C1:C0Antenna Connector Type none specifiedMIMO status 2x2:2Wireless Standard IEEE 802.11b/g/n802.11n up to 300 Mbps802.11g up to 54 Mbps802.11b up to 11 MbpsWiFi Operating Frequency 2.4 GHzRadio 2Chip1 Broadcom BCM4331Wireless interface OUI 58:6D:8F, C0:C1:C0Antenna Connector Type U.FLMIMO status 3x3:3Wireless Standard IEEE 802.11a/n802.11n up to 450 Mbps802.11a up to 54 MbpsWiFi Operating Frequency 5 GHz CPU1 brandRadio1 chip1 brandRadio2 chip1 brandLinksys E4200 v1BroadcomBroadcomBroadcomLinksys E4200 v2MarvellMarvellMarvell

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Linksys device with specifications, see Linksys.

• 450 Mbps - 3SS 5GHz 802.11n (40MHz chan.), • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN750 class Overview

"3763-40700105R" and the Cisco logo is silkscreened on the board.

This router uses Galtronics antennas. Note: Three antennas are used by the 2.4 GHz radio, but it's still a 2T2R radio..

The default SSID pattern for this device is CiscoXXXXXX on both bands,

where XXXXX is the last 5 characters of the serial number.

Wi-Fi Certified : WFA9933 (as of 10/18/2010)

Links of Interest Wikis Linksys E4200 v1 On the DD-WRT wiki Reviews Review on SmallNetBuilder Forum threads On the TomatoUSB forums On the DD-WRT forums The v1 serial numbers appear to start with 01C10C.. Firmware projects

This device is supported by...

Victek's Tomato RAF builds Shibby's Tomato builds (K26 and K26RT-N) Toastman's Tomato builds Pictures from Cisco