To reconnect your EZVIZ C6CN camera to Wi-Fi after disconnecting it, follow these steps: 1. Plug in the camera's power cable and connect the power adapter to an electrical outlet. 2. Turn on the camera and let it fully power up. The camera will perform a full rotation from left to right and a tilt from top to bottom once. 3. Check the camera's LED indicator to know its status: - A steady red light indicates the camera is starting up. - A slowly flashing red light indicates a failed Wi-Fi connection. - A rapidly flashing red light indicates a device problem (e.g. microSD card error). - A steady blue light indicates video is being viewed or played in the EZVIZ app. - A rapidly flashing blue light indicates the camera is ready for Wi-Fi connection. - A slowly flashing blue light indicates the camera is functioning properly. 4. If the camera fails to connect to your Wi-Fi network, press and hold the reset button for 5 seconds, then repeat step 2. 5. If you want to select another Wi-Fi network, press and hold the reset button for 5 seconds to restart the device. 6. Enable image encryption to secure the transmission of your videos and images. You can also change the default password following these steps: - Access the camera settings. - Tap on "Change Password." - Tap on "Modify." - Enter the original verification code located on the camera label. - Enter the new password (6 to 12 characters and digits). 7. If necessary, adjust the camera angle via the EZVIZ app to achieve an optimal angle. The pan angle ranges from 0° to 340°, and the tilt angle ranges from -15° to 105°.