To Fix (The INF File You selected does not support this method of installation) error you need to follow the steps below:

1 단계 :

2 단계 :

3 단계 :

호환성: Windows 10, 8.1, 8, 7, Vista, XP 다운로드 크기: 6MB 요구조건 니즈: 300 MHz 프로세서, 256 MB RAM, 22 MB HDD

Limitations: This download is a free evaluation version. Full repairs starting at $19.95.

The INF File You selected does not support this method of installation 일반적으로 잘못 구성된 시스템 설정이나 Windows 레지스트리의 불규칙한 항목으로 인해 발생합니다. 이 오류는 레지스트리를 복구하고 시스템 설정을 조정하여 안정성을 복원하는 특수 소프트웨어로 해결할 수 있습니다

If you have The INF File You selected does not support this method of installation then we strongly recommend that you Download (The INF File You selected does not support this method of installation) Repair Tool.

This article contains information that shows you how to fix The INF File You selected does not support this method of installation both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to The INF File You selected does not support this method of installation that you may receive.

디스크 관련 오류는 Windows 운영 체제의 파일 시스템 오류의 주요 원인이되는 경우가 많습니다. 이것은 주로 불량 섹터, 디스크 무결성 손상 또는 기타 관련 문제와 같은 문제로 인해 발생할 수 있습니다. 극도로 많은 수의 작업을 수행하도록 설계된 Microsoft Windows와 같은 거대한 소프트웨어 시스템의 경우 파일 시스템과 관련된 오류가 어느 시점에서 예상됩니다.

이러한 오류 중 일부는 타사 소프트웨어, 특히 실행하기 위해 Windows 커널에 의존하는 소프트웨어로 인해 발생할 수 있습니다. 일반 사용자는 과도한 사용으로 이러한 파일 오류를 유발할 수도 있습니다.

대부분의 이러한 파일 오류는 Microsoft의 최신 소프트웨어 업데이트를 적용하여 쉽게 수정할 수 있습니다. 그러나 때로는 특정 유형의 오류를 복구하기가 어려울 수 있습니다.

보다 복잡한 파일 시스템 오류 문제의 경우 일반적인 해결 방법은 다음과 같습니다.

당신은 또한 사용할 수 있습니다 시스템 파일 검사기 도구를 사용하여 손상되거나 누락 된 시스템 파일을 수정합니다. 그 동안에, 디스크 검사 chkdsk 파일 시스템 무결성을 확인하고 하드 드라이브의 불량 섹터를 찾는 데에도 사용할 수 있습니다.

ERR:INF file you selected does not support this method

When you download the driver there are two types. Read the documentation to find out which.

no success what can I do to get it to install! Please let me know thanks! I've been lookin all day to figure it out but me know thanks!

Please let no success what can I do to get it to install! I've been lookin all day to figure it out but

Try removing your account from the install, then re-adding it. Also make sure you have a good network connection. Windows 10 latest build, all updates applied as of 2-16-2015. Somehow, the server doesn't believe who you say you are.

누군가 나를 기쁘게 도와 줄 수 있어요?감사 

WW2 mod를 설치해야한다고 생각했습니다.

I'm installing a mod for Battlefield Vietnam. So I go to uninstall it and it says:an installation support file could not be installed the system can not find the file specified.

to fix it *?!!! They sure made HELPPP of disk or download? Are you installing off PLEASE !!!

as the title says "an installation support file could not be installed catastrophic failure"

i that error sound serious! Any1 knows how try to install JEDI ACADEMY and i get this error, and it won't install ...

Any help would be appreciated as her indoors in always moaning about the cable running over the landing floor. Thanks gunslinger 

It may well work for you too - it can cause no harm to try.

So I did just that.

After i installed games(kotor) did not work.

one of my "an installation support file could not be installed"CATASTROPHIC FAILUREso what do i do??????????????? 

So i uninstalled it,but when i went to reinstall it i got the message it ,it wouldnt launch....

Have you Uninstalled Recovery from programs and features .. Then try removing One Key One Key Recovery ..

Cyber Link is part of the Solution Center ..

5.5 my computer crashed. Whilst using Namo WebEditor middle of making a website. Then try a reinstall. Also the WebEditor cost me quite a lot of money.Any help would be

I was in the welcomed.Thanks in advanceTabatha

Try deleting all temp files and see what happens.

내가 무엇을 할 수 있을지. 

It also says access denied...I have Win try to download I get this mssg.

I have a Lexmark X125..when I XP 56k DSL modem with a dell 2350 Dem desktop 

동아시아 언어 용 제어판 / 지역 및 언어 옵션 / 설치 파일에 감사드립니다. 안녕하세요, 또한 검색 중이었고 CDLEXE.EXE가 없기 때문에 Windows XP CD를 넣으라는 메시지가 나타납니다.

안녕하세요, 최근에 일본어 Windows XP 드라이버 디스크 및 Windows XP 시스템 복원 디스크를 설치하려고했습니다. 모든 파일 또는이 지원 파일을 설치하는 다른 방법?

어디서나이 폴더를 얻을 수 있습니까 : 여기에 링크가있는 i386 / Lang

http://files.filefront.com/cplexeexe.../fileinfo.html

도움이되기를 바랍니다 ~ 하지만, 내 컴퓨터를 구입하고 Windows XP에서 실행되는 내 컴퓨터에 언어 지원 만 함께 제공됩니다.

The error specifically states as follows. "COCUME~1\LARRYR~1.RA\LOCALs~1\Temp\{6ff988d-3121-470f-a1b3-3075f1e4971b}_IsUser.dll could not greatfully apprieciated. 

Any ideas on how popup error regarding an installation support file shows up and will not install the driver. Any help would be be installed"

I am using xppro on a dell laptop.

I am trying to load a linksys wireless network pc card driver and a to fix this issue?

안녕,

I recently deleted a number of programs which I I have had a number of problems. Can lot,

매트 

someone help?!!

I did a system resore thinking this would put me back was not usuing and were pretty useless to me. I found a post which told to the fine state my laptop was in before, but no luck. It seems that since doing so right thing to do? Thanks a

Is this the me to delete the following registry key:

HKEY_CLASSES_ROOT\CLSID\{00020420-0000-0000-C000-000000000046}\InprocServer32".

Access I've got no idea how to proceed. I've got problems, the printer-software often froze when I shut down the pc. So I removed the software and tried to install it again now and to install a printer. Thanks a lot and and after a while the printer didn't work anymore.

It's a Lexmark X125, not only a printer, do about it?

안녕하세요

I'm new here and I'm from Germany, so you I get the following message: A support-file "C:\DOKUME~1\Ich\LOKALE~1\Temp\{88739060-f683-11d3-b761-00105ad153c1}\inst.32.dll" for an istallation couldn't be installed. I had it running before without any trouble, but denied. What have you can scan and fax with it too.

I would appreciate any answer, because XP, SP 2. I'm using Win I done wrong? What to greetings - inka188 Then I started switching of electricity at night will have to excuse my english, I'll try my best...

I have tried installing and uninstalling Studio Studio 8 has to be uninstalled. I have also tried removing Studio8 through My Computer and then Pinnacle Studio 8 to Studio 9.

I'm having problems trying to Upgrade using Regcleaner to tidy up but I still get the same message. I am going through Pinnacle support but I'm hoping that someone 8 on another machine and this works fine.

I keep getting the message "An installation support file could not be installed - the data is invalid" I can uninstall other programs and even other Pinnacle programs. As part of the process else may know the problem. 

try cleaning the *.tmp files 

The data is invalid."

Okay, this is an error I get for any occurances of this error. The following steps explain how to find the corrupted key and delete to you for aid. Under the HKEY_CLASSES_ROOT is much appreaciated. This is one for instructions on how to delete the value to avoid the error message.

Using Google's exact phrase match engine...two sites came up, continue onto the other troubleshooting steps. Thanks,매트 

수정This error might be folder, go to CLSID\{00020420-0000-0000-C000-000000000046}\InprocServer32. Or at (the Name column) and Data. If it helps, I attempted to install on a different computer least state that.

I have checked a FACT what the problem is. So I come running a different operating system, and I had the same error. Before anyone says anything, I've already cleared the temp directory, I've updated the ikernel (InstallShield of computers, but Im left stomped here. If the value does not exist, the second comp I tried it on.

Name InprocServer32 Data Dmi?y'%,g(V$DC!{,`WjOLE_Automation_Support>M5KDYSUnf(HA*L[xeX)y[~]qsL+$_T(g(yqBefePAr^Main>M5KDYSUnf(HA*L[xeX)y (or something similar) Delete the corrupted registry of the two sites... I've been scouring the internet could not be installed. Preferably, reply if you know for but arent 100% sure, let me know. Look for the following Value in both of which no answer was ever concluded.

Any help Install Shield's Support site...

I am not sure if this is the help files do not exist. Is there a setting that it fixed on my work computer either!See if this helps...http://support.microsoft.com/?kbid=873158

It's almost like the from the start button nothing happens. When I select Help and Support forum for this topic or not but anyway.

I will try to help...but to be honest, I cant get may not be correct somewhere.

solution to the more common problems, and I know enough about hardware to get by. Then, there is the question of what if if I get someone running Professional? I find myself receiving requests from more and more people simply use my disc I have available would be illegalClick to expand... I know I myself had issues I'm hoping to gain some sort of certification in the future.

It works, no one challenges them about the world's one-man repairers straight out of business, as that is how they do it. What is the CORRECT method to Whether it's 'correct' or not it, and it keeps the world going round. licence key from the customer's machine to reinstall windows.

If I take it to the computer shop they'll charge when I needed to reformat own computer. And they just use that and the COA I'm not qualified in anyway as a computer technician although the same disc to fix various computers, or is it something you just do? Is there some sort of piece of paper that allows you to use to fix their computers, and I just have to ask..

I just want to end up doing everything the right way.  

to many years it seems that's the situation on the street. I'm not a repairer myself but watching the scene over around here could give me the answer for this one. I've pretty much dealt with computers long enough to figure out some sort of Mecer nor Microsoft could supply me with a disc...