Cisco IOS XE Software for NCS 4200 Series Network Convergence Systems Data Sheet

您所在的位置:网站首页 ciscoasa5505series Cisco IOS XE Software for NCS 4200 Series Network Convergence Systems Data Sheet

Cisco IOS XE Software for NCS 4200 Series Network Convergence Systems Data Sheet

2023-04-10 10:08| 来源: 网络整理| 查看: 265

 

Cisco IOS® Software is always evolving to provide you with more features of higher quality. Cisco IOS XE Software releases provide a modular structure for Cisco® NCS 4200 Series Network Convergence Systems. Why is this modularity important? It allows the software to significantly enhance quality and performance by taking advantage of the separation of the data plane and the control plane.

Product overview

The NCS 4200 Series products provide a purpose-built solution that enables service providers to meet their legacy TDM requirements as well as their current and future needs for Ethernet services. With high-density TDM, SONET/SDH, OTN, and Carrier Ethernet (FE, GE, 10GE, 40GE, and 100GE) interfaces, the NCS 4200 Series delivers any-to-any connectivity using a packet-based network (MPLS/Flex LSP/SR) more efficiently than any other packet transport mechanism and is not bounded by TDM transport inefficiencies.

The Cisco IOS XE Software available on the NCS 4200 Series portfolio (Figure 1) includes all features and licenses required for Metro SONET/SDH, OTN, IP, and MPLS aggregation services.

Figure 1.            

Cisco NCS 4200 Series Portfolio

Features and benefits

Feature

Benefit

Support for TDM and SONET/SDH migration to modernized packet-based optical metro network

Provides cost-effective delivery of Circuit Emulation (CEM) and Carrier Ethernet (CE) capabilities over a redundant and protected packet-based network (MPLS/FlexLSP/SR).

Metro carrier Ethernet aggregation

Enables the service flexibility and delivery of Layer 2, Layer 3, IP, and MPLS transport for advanced L2VPN, L3VPN, and multicast services.

Industry-leading, carrier-class circuit emulation (CEM) technology

Delivers any-to-any connectivity using a packet-based network (MPLS/Flex LSP/SR) using TDM, PDH, SONET/SDH, and carrier Ethernet (FE, GE, and 10GE) interfaces.

Next-generation access network with fully distributed and unique packet capabilities

Supports state-of-the-art Pseudowire Emulation Edge-to-Edge (PWE3), Hierarchical Quality of Service (H-QoS), and next-generation IP/MPLS.

Cisco’s MPLS FlexLSP guarantees resiliency (sub-50 ms switchover time), fault propagation, connectivity verification, statistical multiplexing, and scalability, with RSVP-TE extensions as the control plane for bidirectional tunnel (LSP) setup and programmability for SDN functionality support.

Operation efficiency with end-to-end network management

Supported by the Evolved Programmable Network Manager (EPN-M), which enables business agility and operational efficiencies through automated device operations, fast provisioning, and proactive assurance.

Comprehensive variety of interfaces and protocols

Ethernet interfaces are available in copper and fiber, with speeds ranging from 10 Mbps to 100 Gbps.

Legacy interfaces are available in speeds ranging from nxDS0 to OC-192/STM-64 for Plesiochronous Digital Hierarchy (PDH), Synchronous Digital Hierarchy (SDH), and Synchronous Optical Network (SONET).

Optical Transport Network (OTN) wrapping functionalities are also supported.

Software releases and options

Cisco NCS 4200 Series systems are supported in Cisco IOS XE Software as of Cisco IOS XE Software Release 3.18.0SP. The release is designed to provide modular packaging, feature velocity, and powerful resiliency.

Consolidated software packages

Three consolidated software packages contain a superset of all features activated. Table 1 describes the Cisco IOS XE Software universal consolidated packages supported on the Cisco NCS 4200 systems and the functionality supported in each of these universal images.

Table 1.        Universal Cisco IOS XE Software Consolidated Packages for Cisco NCS 4200 Series Systems

Cisco IOS XE Consolidated Package

Part Number

Description

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.6.1 Universal - No Payload Encryption

SNCS42R3NK9176

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.6.1 Universal - Payload Encryption

SNCS42R3K9176

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4201 Series IOS XE 17.6.1 Universal - No Payload Encryption

SNCS4201NK9176

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.6.1 Universal - No Payload Encryption

SNCS4202NK9176

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.6.1 Universal - Payload Encryption

SNCS4202K9176

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.7.1 Universal - No Payload Encryption

SNCS42R3NK9177

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.7.1 Universal - Payload Encryption

SNCS42R3K9177

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4201 Series IOS XE 17.7.1 Universal - No Payload Encryption

SNCS4201NK9177

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.7.1 Universal - No Payload Encryption

SNCS4202NK9177

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.7.1 Universal - Payload Encryption

SNCS4202K9177

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.8.1 Universal - No Payload Encryption

SNCS42R3NK9178

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.8.1 Universal - Payload Encryption

SNCS42R3K9178

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4201 Series IOS XE 17.8.1 Universal - No Payload Encryption

SNCS4201NK9178

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.8.1 Universal - No Payload Encryption

SNCS4202NK9178

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.8.1 Universal - Payload Encryption

SNCS4202K9178

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.9.1 Universal - No Payload Encryption

SNCS42R3NK9179

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.9.1 Universal - Payload Encryption

SNCS42R3K9179

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4201 Series IOS XE 17.9.1 Universal - No Payload Encryption

SNCS4201NK9179

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.9.1 Universal - No Payload Encryption

SNCS4202NK9179

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.9.1 Universal - Payload Encryption

SNCS4202K9179

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.10.1 Universal - No Payload Encryption

SNCS42R3NK91710

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.10.1 Universal - Payload Encryption

SNCS42R3K91710

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4201 Series IOS XE 17.10.1 Universal - No Payload Encryption

SNCS4201NK91710

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.10.1 Universal - No Payload Encryption

SNCS4202NK91710

●  Provides a consolidated package ●  Offers complete Cisco IOS XE Software feature support

Cisco NCS 4202 Series IOS XE 17.10.1 Universal - Payload Encryption

SNCS4202K91710

●  Provides a consolidated package with IPSec support ●  Offers complete Cisco IOS XE Software feature support

Cisco IOS XE Software release schedule

The Cisco IOS XE Software delivery schedule allows customers to qualify releases more quickly and have a definitive release schedule for new software images. This schedule is summarized in the following highlights.

●      Time-based releases: Releases are planned for delivery three times a year (every four months). New software features and hardware are introduced in each release. Releases have fewer incremental features included when compared with traditional Cisco IOS Software releases, reducing customer qualification time.

●      Two release support durations: Each Cisco IOS XE Software release is classified as either a Standard Support or Extended Support release. A Standard Support release has End-of-software-maintenance support lifetime of 12 months, with two or three scheduled rebuilds. The Extended Support release provides End-of-software-maintenance support lifetime of 36 months, with four or up to 10 scheduled rebuilds. For more information about the Cisco IOS XE Software end-of-life policy and associated support milestones for specific Cisco IOS XE Software releases, visit https://www.cisco.com.

●      Rebuilds scheduled at regular intervals: Rebuilds are created only for bug fixes, and no new features are included in a rebuild image. For a release rebuild schedule, visit the Cisco IOS XE Software support timeline for details.

Major software features

Table 2 lists the features supported by Cisco IOS XE Software in Cisco NCS 4200 Series systems. Availability of features is dependent on software release, Route Switch Processor (RSP) version, and implementation schedule. Check release notes for additional details.

Table 2.        Cisco NCS 4200 Series system software features

Features

Ethernet Services

●  Ethernet Flow Point (EFP) with support for:

◦    802.1q

◦    802.1ad

◦    Selective QinQ

◦    Inner and Outer VLAN classification

◦    VLAN local significance

◦    One VLAN tag ingress push

◦    Pop one VLAN tag

◦    Pop two VLAN tags

◦    Trunk-EFP construct for configuration simplification

●  Ethernet Private Line (EPL) and Ethernet Virtual Private Line (EVPL) using Local Connect ●  IEEE 802.1s Multiple Spanning Tree (MST) ●  Per VLAN Spanning Tree Plus (PVST+) ●  Rapid Per VLAN Spanning Tree Plus (RPVST+) ●  VLAN Translation ●  Unidirectional Link Detection (UDLD) ●  Link Layer Discovery Protocol (LLDP) ●  Cisco Discovery Protocol (CDP) ●  Resilient Ethernet Protocol (REP) ●  ITU G.8032 ●  802.3ad/802.1ax Link Aggregation Control Protocol (LACP) ●  Multichassis Link Aggregation Control Protocol (mLACP) ●  Layer 2 Protocol Tunneling (L2PT) ●  VPLS, HVPLS, Virtual Private Wire Service (VPWS), and EoMPLS ●  Routed Pseudowire and Routed VPLS ●  Static Multicast MAC addresses ●  IGMP snooping on Ethernet Flow Point ●  Link Pass Through ●  Pseudowire redundancy ●  Hot Standby Pseudowire ●  Multisegment Pseudowire ●  Flow Aware Transport Pseudowire (FAT PW) - RFC 6391 ●  Flow Aware Transport Pseudowire (FAT PW) over VPLS ●  Multi-Chassis Link Aggregation Group (MC-LAG) ●  Ethernet loopback on EFP and Trunk EFP ●  Multicast Label Distribution Protocol v4 (mLDPv4) ●  Multicast Label Distribution Protocol v6 (mLDPv6) ●  MAC Security ●  VPLS over port-channel and bridge domain interface ●  Segment Routing ●  Configurable Y.1564 Service Activation Frame Sizes and EMIX Support (MEF 48) ●  Y1564 and EDPL on dot1ad ●  ORF Support for BGP Labeled Unicast ●  Bi-Directional Multicast ●  Tagged packet support using Link Layer Discovery Protocol (LLDP) ●  DHCP Snooping Option 82

TDM, SONET/SDH, and OTN Services

●  Clear Channel and Channelized T1 and E1 ports ●  Clear Channel and Channelized (cbit, unframed) T3 and E3 ports ●  Channelized OC3/12/48/192 and STM-1/-4/-16/-64 ports ●  High Order (HO) and Low Order (LO) SONET/SDH Switching ●  1:1 DS1/DS3 Card Protection ●  Automatic Switching Protection (APS) ●  Single Router Automated Protection switching (SR-APS) ●  Access Circuit Redundancy (ACR) ●  Multiplex Section Protection (MSP) ●  Unidirectional Path Switched Ring (UPSR) ●  Sub Network Connection Protection (SNCP) ●  SONET Data Communications Channel (SDCC) ●  Line Data Communications Channel (LDCC) ●  DCC Tunneling ●  Synchronization Status Messaging (SSM) ●  Optical Transport Network (OTN) (G.709) ●  Configurable OH Accounting ●  Pseudowire setup and maintenance using the Label Distribution Protocol (LDP) - RFC 4447 ●  Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) - RFC 4553 ●  Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet Switched Network (CESoPSN) - RFC 5086 ●  Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet (CEP) – RFC 4842 ●  IPv4 Interworking (MLPPP, PPP, HDLC) (3G and 10G MS line cards only) ●  IPv4 Interworking (MLPPP. PPP, HDLC) + APS/UPSR (3G and 10G MS line cards only) ●  IPv6 Interworking (MLPPP, PPP, HDLC) (3G and 10G MS line cards only) ●  IPv6 Interworking (MLPPP. PPP, HDLC) + APS/UPSR (3G and 10G MS line cards only) ●  IPv4 Frame Relay (FR) and Multlink Frame Relay (MLFR) (3G and 10G MS line cards only) ●  IPv6 Frame Relay (FR) and Multlink Frame Relay (MLFR) (3G and 10G MS line cards only) ●  IPv4/IPv6 Interworking support for nxDS0 (3G line card only) ●  Pseudowire Termination (VC Type11) Interworking to VLAN Handoff ●  Target Identifier Address Resolution Protocol (TARP) ID for SONET / ETHERNET ●  Single Router Automated Protection Switching (SR-APS) ●  Multirouter Automated Protection Switching (MR-APS) ●  Access Circuit Redundancy (ACR) ●  Layer 3 POS Termination ●  TDM Loopbacks ●  Integrated BERT Testing ●  Pseudowire redundancy ●  Hot Standby Pseudowire ●  Multisegment Pseudowire ●  CEM PW scale 24,192 ●  Monitor/Split TAP Enhancements ●  Add'l BERT Patterns - 1s, 0s ●  BERT Error Injection ●  CAS feature to do Superframe to Extended Superframe conversion ●  DS0 Loopbacks - Network and Local ●  CAS feature to do Superframe to Extended Superframe conversion ●  DS0 Loopbacks - Network and Local

Layer 3 and MPLS Services

●  Hot Standby Router Protocol (HSRP) ●  Virtual Router Redundancy Protocol (VRRP) ●  Layer 3 routing on Routed interfaces and Bridge Domain Interfaces (BDI) ●  Cisco Express Forwarding (CEF) load sharing of Equal Cost Paths (ECMP) ●  Open Shortest Path First (OSPF) Version 2, RFC 2328 ●  Open Shortest Path First (OSPF) Version 3, RFC 5340 ●  Border Gateway Protocol (BGP) Version 4, RFC 4271 ●  BGP 4-byte Autonomous System Number (ASN) ●  BGP TCP Path MTU Discovery ●  BGP Prefix-Independent Convergence (PIC) Edge and Core for IPv4 and MPLS VPN ●  BGP Prefix-Independent Convergence (PIC) Edge over TE-FRR with Next Hops ●  BGP PIC over Short LCM policies ●  Intermediate System to Intermediate System (IS-IS) – RFC 7142 ●  BFD for OSPF, IS-IS, BGP, Multicast, and static routes IPv4/IPv6 ●  BFD over Ethernet, Routed port, HDLC and PPP interfaces ●  BFD for HSRP group client ●  BFD Echo Mode ●  Multihop BFD ●  Micro BFD on Link Aggregation Group (LAG) Interfaces - RFC7130 ●  Multiprotocol Label Switching (MPLS) ●  MPLS FlexLSP ●  MPLS FlexLSP with Shared Risk Link Group (SRLG) Protection ●  MPLS FlexLSP with non-revertive, sticky mode ●  MPLS Flex-LSP co-routed tunnel inter-area support ●  Ethernet VPN (EVPN) VPWS single homed ●  LDP with Label Edge Router (LER) and Label Switch Router (LSR) ●  MPLS L3VPN ●  MPLS Transport Profile (MPLS-TP) for Ethernet, and TDM Pseudo Wires ●  MPLS Traffic Engineering Fast Re-Route (TE-FRR) ●  Dynamic Resource Reservation Protocol – Traffic Engineering (RSVP-TE) label allocation ●  MPLS Point-to-Multipoint Traffic Engineering ●  RSVP-TE Extensions for Associated Bidirectional Label Switched Paths (LSPs) – RFC 7551 ●  RSVP-TE Extensions to RSVP for LSP Tunnels – RFC 3209 ●  IP Loop Free Alternate Fast Re-Route (LFA FRR) ●  Remote Loop Free Alternate Fast Re-Route (R-LFA FRR) ●  Internet Group Management Protocol (IGMP) version 1 – RFC 1112 ●  IPv4 and IPv6 multicast ●  PIM-SM, PIM Source Specific Multicast (PIM SSM), PIM SSM mapping ●  IGMPv2 – RFC 2236 ●  IGMPv3 – RFC 3376 ●  IGMP group limiting ●  Multicast Listener Discovery (MLD) ●  Multicast VPN (MVPN) based on IETF Rosen Draft ●  Multicast VPN (MVPN) based on Label Distribution Protocol (mLDP) ●  Multicast VPN with GRE over Bridge Domain Interface (BDI) ●  Multicast VPN (MVPN) over Routed Pseudowire ●  Segment Routing (SR) ●  SR Label Recirculation for TI-LFA ●  SR-TE 7-label support ●  SR-TE ODN Color Extended Community (L3VPN) ●  L2VPN (VPWS+VPLS) and EVPN VPWS (Single-Homing) over SR ●  SR-TE Affinity constraints for ODN ●  SR uLoop Avoidance ●  SR-PCE: PCE Initiated SR Policy + ISIS Autoroute ●  LSR support over Autoroute-Announce SR Policies with 3 or 4 labels ●  Control Plane Policing (CoPP) ●  Full alarm profile ●  VRRP V3 SSO with sub-second support ●  SR ISIS Flex Algo: Multi-plane, delay metric, ODN w/ Auto Steering ●  SR Static route traffic steering using SRTE Policy ●  SR Per Flow (Class) ODN and Automated Steering (PCE Delegated)

IPv6

●  Hardware based IPv6 data forwarding ●  Addressing and discovery ●  Manual IPv6 interface addressing ●  ICMPv6 (RFC 4443) ●  IPv4 and IPv6 dual stack ●  IPv6 static routing ●  OSPF for IPv6 (RFC 5340) ●  DHCPv6 with relay function ●  DHCPv6 server and client ●  BFD for OSPF, IS-IS, BGP, and IPv6 static routes ●  BFD on IP unnumbered interface ●  IPv6 Provider Edge (6PE) ●  IPv6 VPN Provider Edge (6VPE) ●  IPv6 QoS

QoS

●  Modular QoS CLI (MQC) ●  Hierarchical QoS (HQoS) ●  Port shaper and Low Latency Queuing (LLQ) in the presence of an EFP ●  IEEE 802.1p Class of Service (COS) based QoS ●  Classification based on inner and outer CoS ●  IP Precedence Type of Service (ToS) based QoS ●  Differentiated Services Code Point (DSCP) based QoS ●  Differentiated Services MPLS-TE per Requirements for Support of Differentiated Services-aware MPLS Traffic Engineering – RFC 3564 ●  Egress marking of COS, ToS, DSCP, and MPLS EXP QoS fields ●  Classification using Access Control List (ACL) ●  2-rate 3-color (2R3C) ingress Policing ●  Differentiated Services Code Point (DSCP) traffic shaping ●  Class-Based Weighted Fair Queuing (CBWFQ) ●  Priority Queuing with up to 2 priority queues ●  Weighted Random Early Detect (WRED) ●  Egress shaping per queue ●  Egress policing per queue ●  Resource Reservation Protocol (RSVP) Call Admission Protocol (CAC) ●  QoS support for Serial Interfaces (HDLC/PPP) (3G line card only) ●  Ingress QoS Support on EFPs under a Port Channel

Timing

●  IEEE 1588-2008 Ordinary Clock over Ethernet, IP, and MPLS ●  IEEE 1588-2008 end-to-end Transparent Clock over Ethernet, IP, and MPLS ●  IEEE 1588-2008 Boundary Clock over Ethernet, IP, and MPLS ●  IEEE 1588-2008 Precision Time Protocol (PTP) telecom profile for frequency synchronization – ITU-T G.8265.1/Y.1365.1 ●  PTP Multi-profile support ●  Hybrid clocking ●  T1/E1 line timing ●  OCn/STM-n Line Timing ●  Adaptive Clock Recovery (ACR) ●  Differential Clock Recovery (DCR) ●  Global Navigation Satellite System (GNSS) ports; Time of Day (ToD), 10MHz, 1 Pulse Per Second (1PPS) ●  Building Integrated Timing Supply (BITS) ●  ITU-T G.781 and GR-1244-CORE/GR-253-CORE based Clock Selection ●  ITU-T SyncE with Ethernet Synchronization Messaging Channel (ESMC) (G.8261, G.8262, G.8264) ●  ITU-T G.8265.1 Telecom Profile ●  ITU-T G.8275.1 Telecom Profile ●  ITU-T G.8275.2 Telecom Profile ●  Synchronization Status Messages (SSM) (G.781, G.707, G.704) ●  SyncO Ready (under Discussion by ITU-T ST15) ●  Explicit Pointer Adjustment Relay (EPAR) ●  Hop-by-Hop PTP Redundancy

OAM

●  IEEE 802.1ag Connectivity Fault Management (CFM) over EFP ●  IEEE 802.3ah Link OAM ●  MPLS Fault Management Operations, Administration, and Maintenance – RFC 6427 ●  MPLS Generic Associated Channel (G-Ach) – RFC 5586 ●  BFD Connectivity Verification per OAM Framework for MPLS-Based Transport Networks – RFC 6371 ●  On-demand CV/Route Tracing per Mechanism for Performing Label Switched Path Ping (LSP Ping) over MPLS Tunnels – RFC 6424 ●  ITU-T Y.1731 Fault Management (FM) over EFP ●  ITU-T Y.1731 Performance Management (PM) over EFP for Delay Measurement (DM) and Synthetic Loss Measurement (SLM) ●  ITU-T Y.1564 Ethernet Service Activation Test methodology (SAT) ●  Ethernet Local Management Interface (E-LMI), as a Provider Edge (PE) device ●  CFM extensions for microwave Adaptive Code Modulation (ACM) actual air bandwidth exchange ●  Two-Way Active Measurement Protocol (TWAMP) with VRF support – RFC 5357

Security

●  Authentication, Authorization, and Accounting (AAA) with TACACS+ and RADIUS ●  SSH Protocol v2 ●  MAC limiting per Bridge Domain (BD) ●  Storm control for Port Mode ●  Layer 3 Access Control Lists (ACL) for IPv4 and IPv6 ●  IPv4 unicast Reverse Path Forwarding (uRPF) strict mode ●  MAC security ●  Dynamic Arp Inspection (DAI) ●  DHCP Snooping with option 82 insertion ●  DHCP Option 82 Configurable Circuit ID and Remote ID ●  Security Architecture for the Internet Protocol (IPsec) ●  Advanced Encryption Standard (AES) CCM Mode with IPsec Encapsulating Security Payload (ESP) (IKEv2/IKEv1) ●  Extended Sequence Number support ●  Dead Peer Detection for IKE ●  Anti-Replay for IPSec ●  IPSec feature to negotiate traffic type/port for a session ●  IPSec over VRF ●  IP Source Guard ●  IP SLA for Pseudowire ●  Facilitation of generating CSR File for Certificates ●  Support for X.509 certificates ●  CRL support for PKI ●  Online Certificate Status Protocol (OCSP) – RFC 6960 ●  Storm Control ●  Generic Routing Encapsulation (GRE) - RFC 2784 ●  Lawful Intercept

Manageability

●  SNMP ●  MIBs ●  Netconf ●  YANG ●  Dying Gasp message ●  Embedded Event Manager (EEM) ●  Cisco Discovery Protocol (CDP) ●  802.1ab Link Layer Discovery Protocol (LLDP) ●  Port Level Local SPAN (SPAN) ●  Port Level Remote SPAN (RSPAN) ●  Cisco IOS Software Command Line Interface (CLI) ●  Cisco Prime ® Network: fault, provisioning, and performance management ●  Cisco Evolved Programmable Network Manager (EPN-M): fault, provisioning, and performance management

Ordering information

Table 3 lists the Cisco NCS 4200 Series software licenses.

Table 3.        Cisco NCS 4200 Series software licenses

Part Number

Description

SNCS42R3NK9176

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.6.1 Universal - No Payload Encryption

SNCS42R3K9176

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.6.1 Universal - Payload Encryption

SNCS4201NK9176

Cisco NCS 4201 Series IOS XE Universal 17.6.1 - No Payload Encryption

SNCS4202NK9176

Cisco NCS 4202 Series IOS XE Universal 17.6.1 - No Payload Encryption

SNCS4202K9176

Cisco NCS 4202 Series IOS XE Universal 17.6.1 - Payload Encryption

SNCS42R3NK9177

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.7.1 Universal - No Payload Encryption

SNCS42R3K9177

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.7.1 Universal - Payload Encryption

SNCS4201NK9177

Cisco NCS 4201 Series IOS XE Universal 17.7.1 - No Payload Encryption

SNCS4202NK9177

Cisco NCS 4202 Series IOS XE Universal 17.7.1 - No Payload Encryption

SNCS4202K9177

Cisco NCS 4202 Series IOS XE Universal 17.7.1 - Payload Encryption

SNCS42R3NK9178

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.8.1 Universal - No Payload Encryption

SNCS42R3K9178

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.8.1 Universal - Payload Encryption

SNCS4201NK9178

Cisco NCS 4201 Series IOS XE Universal 17.8.1 - No Payload Encryption

SNCS4202NK9178

Cisco NCS 4202 Series IOS XE Universal 17.8.1 - No Payload Encryption

SNCS4202K9178

Cisco NCS 4202 Series IOS XE Universal 17.8.1 - Payload Encryption

SNCS42R3NK9179

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.9.1 Universal - No Payload Encryption

SNCS42R3K9179

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.9.1 Universal - Payload Encryption

SNCS4201NK9179

Cisco NCS 4201 Series IOS XE Universal 17.9.1 - No Payload Encryption

SNCS4202NK9179

Cisco NCS 4202 Series IOS XE Universal 17.9.1 - No Payload Encryption

SNCS4202K9179

Cisco NCS 4202 Series IOS XE Universal 17.9.1 - Payload Encryption

SNCS42R3NK91710

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.10.1 Universal -No Payload Encryption

SNCS42R3K91710

Cisco NCS 4206/4216/4216 F2B Series RSP3 IOS XE 17.10.1 Universal -Payload Encryption

SNCS4201NK91710

Cisco NCS 4201 Series IOS XE Universal 17.10.1 - No Payload Encryption

SNCS4202NK91710

Cisco NCS 4202 Series IOS XE Universal 17.10.1 - No Payload Encryption

SNCS4202K91710

Cisco NCS 4202 Series IOS XE Universal 17.10.1 - Payload Encryption

Warranty information

Warranty information is available on Cisco.com at the Product Warranties page.

Cisco environmental sustainability

Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report.

Reference links to information about key environmental sustainability topics (mentioned in the “Environment Sustainability” section of the CSR Report) are provided in the following table:

Sustainability topic

Reference

Information on product material content laws and regulations

Materials

Information on electronic waste laws and regulations, including products, batteries, and packaging

WEEE compliance

Cisco makes the packaging data available for informational purposes only. It may not reflect the most current legal developments, and Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This information is subject to change without notice.

Service and Support

Cisco offers a wide range of services programs to help accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, promoting high levels of customer satisfaction. Cisco Services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services.

Cisco is committed to reducing your total cost of ownership. Cisco offers a portfolio of technical support services to help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The services and support programs described in Table 4 are available as part of the Cisco Carrier Ethernet Switching Service and Support solution and are available directly from Cisco and through resellers.

Table 4.        Service and Support

Advanced Services

Features

Benefits

Cisco Total Implementation Solutions (TIS), available directly from Cisco

Cisco Packaged TIS, available through resellers

●  Project management ●  Site survey, configuration, and deployment ●  Installation, text, and cutover ●  Training ●  Major moves, adds, and changes ●  Design review and product staging ●  Supplement existing staff ●  Help ensure functions meet needs ●  Mitigate risk

Cisco SP Base Support and Service Provider-Based Onsite Support, available directly from Cisco

Cisco Packaged Service Provider-Based Support, available through resellers

●  24-hour access to software updates ●  Web access to technical repositories ●  Telephone support through the Cisco Technical Assistance Center (TAC) ●  Advance replacement of hardware parts ●  Facilitate proactive or expedited problem resolution ●  Lower total cost of ownership by taking advantage of Cisco expertise and knowledge ●  Reduce network downtime

Cisco Capital

Flexible payment solutions to help you achieve your objectives

Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.

Document history

Table 5.        Document history

New or Revised Topic

Described In

Date

Added new software PIDs

Consolidated software packages

August 4, 2021

Added new software features

Major software features

August 4, 2021

 

 

 



【本文地址】


今日新闻


推荐新闻


    CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3