|
+NAME=BT05 ******************************************************************** * Command Description * * ---------------------------------------------------------------- * * AT Check if the command terminal work normally * * AT+RESET Software reboot * * AT+VERSION Get firmware, bluetooth, HCI and LMP version * * AT+HELP List all the commands * * AT+NAME Get/Set local device name * * AT+PIN Get/Set pin code for pairing * * AT+BAUD Get/Set baud rate * * AT+LADDR Get local bluetooth address * * AT+ADDR Get local bluetooth address * * AT+DEFAULT Restore factory default * * AT+RENEW Restore factory default * * AT+STATE Get current state * * AT+PWRM Get/Set power on mode(low power) * * AT+POWE Get/Set RF transmit power * * AT+SLEEP Sleep mode * * AT+ROLE Get/Set current role. *
* AT+PARI Get/Set UART parity bit. * * AT+STOP Get/Set UART stop bit. * * AT+INQ Search slave model * * AT+SHOW Show the searched slave model. * * AT+CONN Connect the index slave model. * * AT+IMME System wait for command when power on. * * AT+START System start working. * * AT+UUID Get/Set system SERVER_UUID . * * AT+CHAR Get/Set system CHAR_UUID . * * -----------------------------------------------------------------* * Note: (M) = The command support master mode only. * * Copyright@2013 www.cyobd.com. All rights reserved. * ********************************************************************
|