ABB ACS580 series AC Inverter for 3kW (4HP) 400V 3 Ph motor to 7.2A at high overload or 4kW (5HP) to 8.9A when Fan/Pump rated. Operates in VxF or Sensorless Vector control and converts fixed frequency Three Phase 400V input to variable frequency 400V to control the speed of a standard AC induction motor.

Size R1: 125mm Wide x 223mm Deep x 330mm High (glandbox is integrated). IP21. Weight: 4.6kg.

Overload: 150% x 60 seconds every 10 minutes (High Overload) Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated) Speed Control Range: 0-500Hz. Braking: To 52 Ohm minimum, 140 Ohm maximum external resistor to 3.9kW (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.

Supplied with Operator Keypad (Assistant Control Panel) 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for RS-485/Modbus RTU communications, terminals for dual channel SIL3 safe torque off (STO), 24V AC/DC input to power the control unit when the main supply is disconnected. Input Current: [as output current] Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5% EMC Compliance: IEC EN61800-3:2004 +  A1:2012 Category C2 (Industrial or restricted Domestic)

Cubicle mount. Rated 40°C Ambient. Ventilation space above: 30mm, below: 200mm, at sides: 150mm, in front: [Not Specified] Heat Loss at max output: 133W Mounting via 4 x 6.5mm diameter slotted holes at rear on 98mm x 317mm centres.

New Part Number is ACS580-01-09A5-4 or 3AXD50000038952. Previous Part Number is ACS580-01-09A4-4 or 3AUA0000080491. Replaces ACS550-01-08A8-4.

Download the ABB ACS580-01 Manual and Quick Start Guide from the links below:-