This was made to be in your fuzz. AC128 PNP Germanium. NOS from 1970's.

Choose your hFE range, higher number is higher gain. 

*Note, germanium is temperature sensistive, these were measured in a warehouse ~70°F. Tested with RG Keens method. Anything unstable was rejected. Leakage is below 300uA unless otherwise specified. These hFE ranges are meant to be ballpark ranges and it is not guaranteed that your transistor will fall perfectly in that range. Example, if you choose 80-90, it might be 75 or 95, but it will not be outrageously outside the selected range.

*Rejects are transistors that did not fall within our specs. Very low gain, or very high leakage, or major instability etc. Probably no practical use but if you want to take your shot with them, be my guest!