The Truke Air Buds earbuds come with specs such as the Bluetooth 5.1 with up to 10 meters of work range, 10 hours of playtime and up to 48 hours using the charging case, a 10mm speaker driver, quad MEMS MIC with ENC, IPX4 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

What's Inside

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Automatically: Open the lid of the charging case and take the earbuds out. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

Manually: Press and hold the multifunction touch area on both earbuds for about 3 seconds, until a green and white light will start flashing in both earbuds.

Automatically: Place the earbuds into the charging case and closet its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch area on any of the earbuds for about 5 seconds. If the earbuds are linked, powering off one earbud will power off both of them.

Step 1: Open the lid of the charging case and take the earbuds out. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

NOTE: If the earbuds don’t power on automatically, then press and hold the multifunction touch area on both earbuds for about 3 seconds, until a green and white light will start flashing in both of them.

When said green and white light only flashes in one of the earbuds, it means that they will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Select the trüke Air Buds earbuds. If a password is needed, type “0000”. After that, the lights will stop flashing, and the pairing will be done.

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

NOTE: If the earbuds don’t power on automatically, then press and hold the multifunction touch area on both earbuds for about 3 seconds, until a green and white light will start flashing in both of them.

When said green and white light only flashes in one of the earbuds, it means that they will be ready to pair with any device.

Step 7: Select the trüke Air Buds earbuds. If a password is needed, type “0000”. After that, the lights will stop flashing, and the pairing will be done.

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

To charge the earbuds, all you have to do is to place them into the charging case. The earbuds will start charging automatically.

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically.

Step 1: Disconnect the earbuds from the connected device.

Step 2: Open the lid of the charging case and take the earbuds out. After that, a green and white light will start flashing in both earbuds, and they will turn on automatically.

Step 3: Take the earbuds out of the charging case.

Step 4: Press the multifunction touch area on both earbuds 4 times.

Step 5: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Step 6: Open the lid of the charging case. After that, the process will be done.

The Truke Air Buds earbuds can be used together with an app specially made for them, and it is the Tuya app, which is available for devices with the Play Store and App Store. After having downloaded the app and connected to the earbuds, a main page appears with the earbuds’ battery percentage, in addition to three pages:

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

No, the Truke Air Buds are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Yes, the earbuds come with integrated microphones.

Yes, these earbuds have a low latency/gaming mode.

Yes, these earbuds can connect to PCs and laptops.

No, these earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earphone from the above Truke Air Buds manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.