聚氨酯海绵测试标准汇总 |
您所在的位置:网站首页 › 聚氨酯材料特性参数测量标准 › 聚氨酯海绵测试标准汇总 |
GB/T 10654-2001 (软质材料) Flexible cellular polymeric materials - Determination of tensile strength and elongation at break柔性多孔聚合物材料-拉伸强度和断裂伸长率的测定 JIS K6767:1999 (聚乙烯泡沫塑料)Cellular plastics - Polyethylene - Methods of test蜂窝塑料-聚乙烯-试验方法 ASTM D3574-17 Test E Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法 - 平板、粘合和模压聚氨酯泡沫 GB/T 24451-2009 Clause7.9(慢回弹软质PU泡沫) Low resilience flexible polyether polyurethane cellular plastics慢回弹软质聚氨酯泡沫塑料 GB/T 24451-2020 (2021.2.1生效) Low resilience flexible polyurethane cellular plastics慢回弹软质聚氨酯泡沫塑料 拉伸强度Tensile strength ISO 1926:2009 (硬质泡沫) Rigid cellular plastics - Determination of tensile properties硬质泡沫塑料,拉伸性能的测定 GB/T 9641-1988 (硬质泡沫) Test method for tensile properties of rigid cellular plastics硬质泡沫塑料拉伸性能试验方法 断裂应力Breaking stress ISO 1926:2009 (硬质泡沫) Rigid cellular plastics - Determination of tensile properties硬质泡沫塑料,拉伸性能的测定 GB/T 9641-1988 (硬质泡沫) Test method for tensile properties of rigid cellular plastics硬质泡沫塑料拉伸性能试验方法 伸长率Elongation ISO 1926:2009 (硬质泡沫) Rigid cellular plastics - Determination of tensile properties硬质泡沫塑料,拉伸性能的测定 GB/T 9641-1988 (硬质泡沫) Test method for tensile properties of rigid cellular plastics硬质泡沫塑料拉伸性能试验方法 拉伸粘力Tensile Adhesion ASTM D1623-17 (硬质泡沫) Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics硬质泡沫塑料的拉伸和拉伸粘合性能的标准试验方法 弯曲性能Flexural properties ISO 1209-1:2007 (硬质泡沫) Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test硬质泡沫塑料-弯曲性能的测定-第1部分:基本弯曲试验 剪切强度Shear Strength ISO 1922:2018 (硬质泡沫塑料) Rigid cellular plastics - Determination of shear properties硬质泡沫塑料,剪切性能的测定 GB/T 10007-2008 (硬质泡沫塑料) Rigid cellular plastics.Determination of shear strength硬质泡沫塑料.剪切强度试验方法 剪切模量Shear Modulus ISO 1922:2018 (硬质泡沫塑料) Rigid cellular plastics - Determination of shear properties硬质泡沫塑料,剪切性能的测定 GB/T 10007-2008 (硬质泡沫塑料) Rigid cellular plastics.Determination of shear strength硬质泡沫塑料.剪切强度试验方法 撕裂强度Tear Strength EN ISO 8067:2018 (软质材料) Flexible cellular polymeric materials - Determination of tear strength柔性多孔聚合物材料 - 撕裂强度的测定 GB/T 10808-2006 (软质材料) Flexible cellular polymeric materials.Determination of tear strength高聚物多孔弹性材料.撕裂强度的测定 JIS K6767:1999 (聚乙烯泡沫塑料) Cellular plastics - Polyethylene - Methods of test蜂窝塑料 - 聚乙烯 - 试验方法 ASTM D3574-17 Test F Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 弯曲强度和表观弯曲模量Flexural strength and apparent flexural modulus of elasticity GB/T 8812.2-2007 (硬质泡沫塑料) Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity硬质泡沫塑料 弯曲性能的测定.第2部分:弯曲强度和表观弯曲弹性模量的测定 ISO 1209-2:2007 (硬质泡沫塑料) Rigid cellular plastics Determination of flexural properties Part 2: Determination of flexural strength and apparent flexural modulus of elasticity硬质泡沫塑料 弯曲性能的测定第2部分:弯曲强度和表观弯曲弹性模量的测定 压缩永久变形Compression set GB/T 10653-2001 Polymeric materials,cellular flexible-Determination of compression set高聚物多孔弹性材料 压缩永久变形的测定 ASTM D3574-17 Test D Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 EN ISO 1856:2018 (软质材料) Flexible cellular polymeric materials - Determination of compression set柔性多孔聚合物材料 - 压缩永久变形的测定 GB/T 6669-2008 (软质材料) Flexible cellular polymeric materials - Determination of compression set柔性多孔聚合物材料 - 压缩永久变形的测定 ASTM D3575-20 Suffix B Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers由烯烃聚合物制成的柔性蜂窝材料的标准测试方法 ASTM D1056-14 第50~56节 Standard Specification for Flexible Cellular Materials-Sponge or Expanded RuBBer柔性蜂窝材料的标准规范-海绵或膨胀橡胶 潮湿条件下压缩永久变形Compression set under humid conditions ISO 13362:2000 (软质材料) Flexible Cellular Polymeric Materials - Determination of Compression Set Under Humid Conditions柔性多孔聚合物材料 - 潮湿条件下压缩永久变形的测定 迟后损失Hysteresis Loss ASTM D3574-17 Test E Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 表观密度Density ISO 845:2006 Cellular plastics and ruBBers Determination of apparent density泡沫塑料和橡胶 表观密度的测定 EN ISO 845:2009 Cellular plastics and ruBBers Determination of apparent density泡沫塑料和橡胶 表观密度的测定 ASTM D1622/D1622M-14 (硬质泡沫) Standard Test Method for apparent Density of Rigid Cellular Plastics硬质泡沫塑料表观密度的标准试验方法 ASTM D3574-17 Test A (软质泡沫) Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 JIS K6767:1999 第7.1节 (聚乙烯泡沫塑料) Cellular plastics - Polyethylene - Methods of test蜂窝塑料-聚乙烯-试验方法 GB/T 6343-2009 Cellular plastics and ruBBers.Determination of apparent density泡沫塑料及橡胶.表观密度的测定 JIS K6401:2011 Section6.3 Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification软质多孔聚合物材料.不包括地毯衬垫的承重应用的聚氨酯泡沫.规范 线性尺寸Linear dimension EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions蜂窝塑料和橡胶-线性尺寸的测定 GB/T 6342-1996 Cellular plastics and rubbers - Determination of linear dimensions蜂窝塑料和橡胶-线性尺寸的测定 泡棉硬度Foam Hardness JIS S6050: 2002+Amd.1:2008 section 6.2 Plastics erasers塑料橡皮擦 GB/T 30680-2014 第5.3.1节 Fluorine rubber sheet general technical conditions氟橡胶板通用技术条件 HG/T 2489-2007 Cellular for shoes.Determination of hardness鞋用微孔材料硬度试验方法 JIS K7312:1996 Section 7 Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers热固性聚氨酯弹性体模制品的物理试验方法 ISO 48-4:2018(取代ISO 7619-1:2010 ) Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或热塑性橡胶 - 硬度测定 - 第4部分:硬度计法的压痕硬度(肖氏硬度) ASTM D2240-15 E type & OOO-S Type Standard Test Method for Rubber Property-Durometer Hardness橡胶性能的标准测试方法-硬度计硬度 压陷硬度Hardness(indentation technique) GB/T 10807-2006 (软质材料) Flexible cellular polymeric materials - Determination of hardness (indentation technique)柔性多孔聚合物材料 - 硬度测定(压痕技术) ASTM D5672/D5672M-15 (软质材料) Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique测试柔性蜂窝材料的标准测试方法 使用25毫米[1英寸]挠度技术测量压痕力挠度 EN ISO 2439:2008 (软质材料) Flexible cellular polymeric materials - Determination of hardness (indentation technique)柔性多孔聚合物材料 - 硬度测定(压痕技术) JIS K6400-2:2012 (软质材料) Flexible cellular polymeric materials - Physical properties - Part 2: Determination of hardness (indentation technique) and stress-strain characteristics in compression柔性多孔聚合物材料。物理性能。第2部分:硬度测定(压痕技术)和压缩应力应变特性 ASTM D3574-17 Test B1 (软质材料) Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 压缩残余应变Identation Residual Gauge Length Test (IRGL) ASTM D3574-17 Test B2 (软质材料) Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 热稳定性Thermal Stability ASTM D3575-20 Suffix S Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers由烯烃聚合物制成的柔性蜂窝材料的标准测试方法 压缩应力应变特性Compression force deflection test ASTM D3574-17 Test C Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 落球回弹Resilience GB/T10652-2001 (高聚物多孔弹性材料) Flexible cellular polymeric materials--Determination of resilience高聚物多孔弹性材料 弹性的测定 GB/T 6670-2008 (软质材料) Flexible cellular polymeric materials.Determination of resilience by ball rebound软质泡沫聚合材料.落球法回弹性能的测定 ISO 8307:2018 (软质材料) Flexible cellular polymeric materials - Determination of resilience by ball rebound柔性多孔聚合物材料。用球回弹法测定回弹性 EN ISO 8307:2018 (软质材料) Flexible cellular polymeric materials - Determination of resilience by ball rebound柔性多孔聚合物材料。用球回弹法测定回弹性 Q/JLY J711185-2008 7.4 浙江吉利汽车研究院标准 QC/T 56-1993(2017) 第6.2节(汽车座椅衬垫材料)汽车座椅衬垫材料性能试验方法 ASTM D3574-17 Test H Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 压缩应力应变特性Stress-strain characteristics in compression EN ISO 3386-1:1997+Amd.1:2010 (软质材料,低密度) Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials 聚合物材料,多孔柔性 - 压缩应力-应变特性的测定 - 第1部分:低密度材料 ISO 3386-1:1986/Amd.1:2010 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials 聚合物材料,多孔柔性 - 压缩应力-应变特性的测定 - 第1部分:低密度材料 JIS K6767:1999 (聚乙烯泡沫塑料) Cellular plastics - Polyethylene - Methods of test蜂窝塑料 - 聚乙烯 - 试验方法 GB/T 18942.1-2003 (软质材料,低密度) Polymeric materials,cellular flexible--Determination of stress--strain characteristic in compression--Part 1: Low--density materials高聚物多孔弹性材料 压缩应力应变特性的测定 第1部分;低密度材料 GB/T 18942.2-2003 (软质材料,高密度) Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials柔性多孔聚合物材料 - 压缩应力应变特性的测定 - 第2部分:高密度材料 JIS K6254: 2017 RuBBer, vulcanized or thermoplastic-Determination of stress-strain properties硫化橡胶或热塑性橡胶应力应变性能的测定 EN ISO 3386-2:1998+Amd.1:2010 (软质材料,高密度) Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials柔性多孔聚合物材料 - 压缩应力应变特性的测定 - 第2部分:高密度材料 ISO 3386-2:1997/Amd.1:2010 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials柔性多孔聚合物材料 - 压缩应力应变特性的测定 - 第2部分:高密度材料 压缩测试Compression Deflection ASTM D1056-14 第17~23节 Standard Specification for Flexible Cellular Materials-Sponge or Expanded RuBBer柔性蜂窝材料的标准规范-海绵或膨胀橡胶 尺寸稳定性Dimensional stability ISO 2796:1986 (硬质泡沫塑料)Cellular Plastics, Rigid - Test for Dimensional Stability多孔塑料,刚性 - 尺寸稳定性测试 GB/T 8811-2008 (硬质泡沫塑料) Rigid cellular plastics.Test method for dimensionsl stability硬质泡沫塑料 尺寸稳定性试验方法 压缩强度Compressive Strength ASTM D1621-16 (硬质泡沫塑料) Standard Test Method for Compressive Properties of Rigid Cellular Plastics硬质泡沫塑料压缩性能的标准试验方法 CNS 2536-1992 3.9 (聚苯乙烯泡沫隔热材料) Method of Test for Thermal Insulation Material Made of Polystyrene Foam泡沫聚苯乙烯隔热材料检验法 ISO 844:2014 (硬质泡沫塑料) Rigid cellular plastics - Determination of compression properties硬质多孔塑料 - 压缩性能的测定 GB/T 8813-2020 (硬质泡沫塑料) Rigid cellular plastics.Determination of compression properties硬质泡沫塑料 压缩性能的测定 GB/T 10801.2-2018 (绝热用挤塑聚苯乙烯泡沫塑料XPS) Rigid extruded polystyrene foam board for thermal insulation(XPS)绝热用挤塑聚苯乙烯泡沫塑料(XPS) ASTM D3575-20 Suffix D Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers由烯烃聚合物制成的柔性蜂窝材料的标准测试方法 相对形变Corresponding Relative Deformation ISO 844:2014 (硬质泡沫塑料) Rigid cellular plastics - Determination of compression properties硬质多孔塑料 - 压缩性能的测定 GB/T 8813-2020 (硬质泡沫塑料) Rigid cellular plastics.Determination of compression properties硬质泡沫塑料 压缩性能的测定 压缩模量Compressive modulus ISO 844:2014 程序A(硬质泡沫塑料) Rigid cellular plastics - Determination of compression properties硬质多孔塑料 - 压缩性能的测定 ISO 844:2014 程序B(硬质泡沫塑料) Rigid cellular plastics - Determination of compression properties硬质多孔塑料 - 压缩性能的测定 GB/T 8813-2020 (硬质泡沫塑料) Rigid cellular plastics.Determination of compression properties硬质泡沫塑料 压缩性能的测定 ASTM D1621-16 (硬质泡沫塑料) Standard Test Method for Compressive Properties of Rigid Cellular Plastics硬质泡沫塑料压缩性能的标准试验方法 压缩疲劳测试(定荷载压缩法)Determination of fatigue by constant-load pounding ASTM D3574-17 Test I3 (软质材料) Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 EN ISO 3385:2014 (软质材料) Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding柔性多孔聚合物材料 - 通过恒定负载冲击测定疲劳 GB/T 18941-2003 (软质材料) Flexible cellular polymeric materials-Determination fatigue by constant-load pounding高聚物多孔弹性材料 定负荷冲击疲劳的测定 QB/T 2819-2006 (软质材料) Flexible cellular materials determination of long time fatigue软质泡沫材料长期疲劳性能的测定 压缩疲劳测试(定位移压缩法)Determination of fatigue by constant-deflection pounding ASTM D3574-17 Test I5 (软质材料) Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 滚压疲劳测试Roller compression fatigue AS 2282.12-1999 Method B (软质材料) Methods for testing flexible cellular polyurethane - Determination of compression fatigue柔性微孔聚氨酯测试方法.压缩疲劳的测定 蠕变测试Creeping test ASTM D3575-20 Suffix BB (聚烯烃多孔弹性材料) Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers由烯烃聚合物制成的柔性蜂窝材料的标准测试方法 ISO 7850:1986 (硬质材料) Cellular Plastics, Rigid - Determination of Compressive Creep多孔塑料,刚性 - 压缩蠕变的测定 GB/T 15048-1994 (硬质材料) Cellular plastics,rigid.Determination of compressive creep硬质泡沫塑料压缩蠕变试验方法 吸水率Water absorption CNS 2536-1992 3.10 (聚苯乙烯泡棉) Method of Test for Thermal Insulation Material Made of Polystyrene Foam泡沫聚苯乙烯隔热材料检验法 ASTM C209-15 Section 14 (海绵) Standard Test Methods for Cellulosic Fiber Insulating Board Inactive纤维素纤维绝缘板的标准试验方法 ASTM D3575-20 Suffix L Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers由烯烃聚合物制成的柔性蜂窝材料的标准测试方法 真空吸水率Vacuum water absorption GB/T 17794-2008 Preformed flexible elastomeric cellular thermal insulation柔性泡沫橡塑绝热制品 20mm变形弯曲力或破坏力Bend Force at 20mm Deflection or Breaking Force GB/T 8812.1-2007 (硬质泡沫塑料) Rigid cellular plastics.Determination of flexural properties.Part 1:Basic bending test硬质泡沫塑料 弯曲性能的测定 第l部分:基本弯曲试验 断裂载荷和弯曲性能Breaking Load and Flexural Properties ASTM C203-05a(2017) Method II (Procedure A/B/D) (保湿隔热材料) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation块型绝热材料断裂载荷和弯曲性能的标准试验方法 复原时间Recovery Time GB/T 24451-2020 Clause 7.8 & appendix A (慢回弹软质聚氨酯泡沫塑料) Low resilience flexible polyether polyurethane cellular plastics慢回弹软质聚氨酯泡沫塑料 GB/T 26392-2011 (慢回弹泡沫) Slow recovery foam.Determination of recovery time慢回弹泡沫 复原时间的测定 ASTM D3574-17 Test M Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 低温柔性Low-temperature flex test GB/T 33622-2017 Flexible cellular polymeric materials - Low-temperature flex test软质泡沫聚合材料 低温柔性试验方法 加速老化试验Accelerated ageing tests ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests柔性和刚性多孔聚合物材料-加速老化试验 GB/T 9640-2008 Flexible and rigid cellular polymeric materials - Accelerated ageing tests柔性和刚性多孔聚合物材料-加速老化试验 高压釜老化Steam autoclave aging ASTM D3574-17 Test J Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 干热老化试验Dry heat aging ASTM D3574-17 Test K Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 湿热老化试验Wet heat aging ASTM D3574-17 Test L Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams柔性蜂窝材料的标准测试方法-平板、粘合和模压聚氨酯泡沫 高温压缩载荷下的尺寸稳定性Dimension stability at elevated temperatures with compressive load DIN 53424-1978 第4节 Testing of Rigid Cellular Materials; Determination of Dimensional Stability at Elevated Temperatures with Flexural Load and with Compressive Load硬质泡沫材料的检验.在弯曲载荷和压力载荷的高温条件下尺寸稳定性的测定返回搜狐,查看更多 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |