version 1: Sorry a lot of work is done in pre pre alpha version and I can't count every changes, just folow development process about version 1, a lot of work is done before it started working. One esential change was done to tool improvement and it is described in one of the my posts related to moving function "erase:" to the section before function "flash:", it is realy improvement and more safer than in time when it was at the start of flashing routine.

version v2 (15.Aug.2017) Implemented free disk space safety check, it was missing and danger in case flashing process gets interupted because of the lack of the free disk space needed for sin extractions and temporary files. I have also include GordonGate flash driver prompt so in case somebody have missing flash drivers, simple need to double click exe and folow drivers archive extraction procedure, later need to install these drivers trought Windos device mannager. Also I have implemented an realy pre pre alpha version of the maybe non working trim (why maybe? Because I don't own xzp so can't test) area dump routine, in case it is working we can dump some esentials trim area units from device (probably not a full dump as like it was on every oldest xperia models - no permissions for dumping drm key unit)

version v3 (23.09.2017) Some more security checks, it's now a bit safer than v2

version v4 (21.10.2017) Updated trim area dumper, now it stores log to the trimarea.log but dump is now in .ta format and writen to the 01.ta and 02.ta

version v5 (22.10.2017) Updated trim area dumper, add progress meter, fix y-n prompt (thanks @pbarrette)

version v6 (22.10.2017) Updated trim area dumper

version v7 (23.10.2017) Updated trim area dumper, newflasher redesigned a bit, fix new partitioning for Oreo

version v8 (24.10.2017) Fix trim area dumper

version v9 & v10 (25.10.2017) Workaorunds on trim area dumper

version v11 (07.04.2018) Support for 2018 devices

version v12 (29.04.2018) Try fix doublefree bug/crash (most noticed on Linux 64 bit binary)

version v13 (01.05.2018) Fix doublefree bug/crash by removing dynamic allocation from function get_reply

version v14 & v15 (12.06.2019) Sony XPeria 1 support added.

version v16 (16.06.2019) LUN0 detection optimized.

version v17 (24.06.2019) LUN0 detection bug fixed.

version v18 (10.08.2019) Untested fix for https://forum.xda-developers.com/cr...wflasher-xperia-command-line-t3619426/page105 Using builtin mkdir instead of calling it trought system call

version v19 (08.10.2019) Implemented prompt for flashing persist partition; print skipped .sin files

version v20 (13.12.2019) implemented prompt for flashing bootloader,bluetooth,dsp,modem,rdimage to booth a,b slots

version v21 (29.06.2020) implemented battery level status check before flashing, flashing bootloader,bluetooth,dsp,modem,rdimage to booth a,b slots is mandatory now and is flashed by default right now, more info, try fix previously reported isue on sync and powerdown command reported 2-3 years ago so I have disabled it and now enabled for test, implemented Macos support (curently need to be tested! If you have plan to test please flash only cache.sin DO NOT flash the rest because of safety for your device!)

version v22 (30.06.2020) trying to fix battery capacity retrieval

version v23 (04.07.2020) removed battery capacity retrieval (not going to work that way), fix trim area dump file name, new gordongate drivers

version v24 (04.07.2020) new feature - now you can run newflasher from script or console with your own command, e.g. newflasher getvar:Emmc-info , I didn't tested all the list of commands, if you do it share them with us!

version v25 (09.07.2020) New trim area dump tool, with this change trim area dump is created in 3 secconds. Do in mind this not dump protected units like drm key...etc! Some changes in scripting feature from v24

version v26 (10.07.2020) Added 4 diferent reboot modes, reboot to android, reboot to fastboot, reboot to bootloader, power off

version v27 (11.07.2020) (not yet released) Workaround in mac libusb

version v28 (12.07.2020) Workaround to sync response bug; Fully implemented support for Mac. I'm tested myself on mac 10.14 but confirmed working on mac 10.15 too

version v29 (12.07.2020) Mac proper libusb deinitialisation

version v30 (13.07.2020) Preparation for Debian packaging; I'm noticed that hex modified arm64 fake pie binary is not working so its now compiled with ndk and its true pie binary now

version v31 (14.07.2020) Fix cosmetic bug https://forum.xda-developers.com/showpost.php?p=83056693&postcount=1212 which might confuse somebody

version 32, not yet released

version 33 (30.07.2020) Allow bootloader unlocking with newflasher; Try fix sync response bug for win and darwin too

version 34 (08.08.2020) Added support for 32bit sized trim area units (as trim area api changed in xperia mark 2 line) (not yet released because of bug)

version 35 (08.08.2020) Updated support for 32bit sized trim area units (as trim area api changed in xperia mark 2 line); Move trim area dumps out of root folder so it not get acidentaly flashed, dumps is now inside folder tadump

version 36 (27.08.2020) Some improvements and and possible bug fixes

version 37 (09.12.2020) Added support for Xperia 5 II with emmc instead of ufs (not working)

version 38 (10.12.2020) Fixed impropper implementation from v37

version 39 (13.12.2020) Since mark 2 devices protocol is changed a bit and on some devices OKAY reply is not in separated usb poacket, instead it is merged with data packet, added support for it

version 40 (03.01.2021) Temporary solution for determining partition 0 sin file caused by two diferent emmc csd info we found recently on mark 2 devices

version 41 (03.01.2021) Removed temporary solution from version 41 so right lun0 sin file get flashed and seccond lun0 get skipped or booth skipped if lun0 sin file do not match device storage size

version 42 (11.03.2021) Fix bug in flashing booth slots when current slot is A, thanks to @chrisrg for discovering bug!

version 43 (12.06.2021) Support for Mark 3 devices

version 44 (19.06.2021) Fully Mark III device implementation

version 45 (20.06.2021) Implemented battery level check and prompt user to take a risk and continue flashing or stop flasing if battery level is less than 15 percent

version 46 (08.07.2021) Fix problem with filenames which contain "_other", it need to be always flashed to the diferent slot

version 47 (15.07.2021) Removed prompt for persist.sin flashing, now its by default skip. Implemented bootloader log retrieval at the end of flashing for better understanding when something goes wrong. Implemented firmware log history retrieval for those who want to know history of the flashed firmwares

version 48 (19.07.2021) Flash bootloader,bluetooth,dsp,modem,rdimage to booth slots only on a,b devices

version 49 (31.07.2021) Support for XQ-BT41

version 50 (12.08.2021) Workin progress on asynchronous usb to make it more like synchronous, added progress bar during send-receive usb packets and more logging. Increased usb timeout to 2 minute. Trying fix sync command at the end of flashing as reported here -> https://github.com/munjeni/newflasher/issues/42

version 51 (12.08.2021) Fix empry line printed while receiving usb packets, thanks @elukyan

version 52 (01.10.2021) Implemented userprompt for keeping userdata, thanks @OhayouBaka for figuring out! Removed bootloader log retrieval

version 53, 54, 55 (20.08.2022) Fix trimarea dumper crash on big endian machines, update building makefiles

version v56, v57 (07.07.2023) Add suport for Xperia 1 generation 5, changed bootdelivery xml atributes