Print

2023-09-07 07:16| 来源: 网络整理| 查看: 265

The procedure to adjust the volume of the headphones varies depending on the version of the Sony | Headphones Connect app and the headphones software.

Assign the playback volume adjustment function to the touch sensor of the headphones

For WF-1000XM5: You can adjust the volume by tapping the touch sensor.

To increase the volume: Quickly tap the touch sensor on the right earbud during music playback. As you repeatedly tap the touch sensor (with an interval of about 0.4 seconds or less between each tap), a notification sound is emitted and the volume increases by 1 step.To decrease the volume: Quickly tap the touch sensor on the left earbud during music playback. As you repeatedly tap the touch sensor (with an interval of about 0.4 seconds or less between each tap), a notification sound is emitted and the volume decreases by 1 step.

For LinkBuds S, WF-1000XM4, WF-1000XM3, and WF-SP800N: You can adjust the volume by changing the touch sensor function to Volume Control using the Sony | Headphones Connect app.

Note: Make sure the Headphone software and the Sony | Headphones Connect app are updated to the latest version.

How to change the touch sensor function

IMPORTANT: The Sony | Headphones Connect app version 6.0.0 (or after) is needed. If your model is WF-1000XM3, update the software of the headphones to version 2.0.2 or after.

The procedure below shows how to change the assigning function for the left unit from Ambient Sound Control to Volume Control.

Note: The example images below are of the Sony | Headphones Connect app for Android™ smartphones and the WF-1000XM3 headphones. If you use an iPhone®, the screen layouts will differ slightly. Start the Sony | Headphones Connect app.

Tap the (Settings) icon at the bottom of the Change the touch sensor function.

On the Left unit settings, tap Ambient Sound Control, and set the Function to Volume Control.

Check that the Function has changed to Volume Control, and tap Done.

Check that the Left unit of the Change the touch sensor function is set to Volume Control. You can now use the left unit touch sensor to adjust the headphone's volume.

Adjust the volume on the playback device connected via Bluetooth

You can adjust the volume on the playback device connected via Bluetooth when making a call.

Adjust the volume on the Sony | Headphones Connect app

Install the Sony | Headphones Connect smartphone app, and move the slide bar next to the speaker icon on the Status tab.

Move the slide bar with the volume icon to change the volume level

Note: On a device that can be linked with the headphones, you can change the headphones' volume level using that device. You can't change the headphone volume on a device that can't be linked with the headphones.

【本文地址】

Print

Print

今日新闻

推荐新闻