STM32

您所在的位置：网站首页 › 百度网盘怎么自动停止播放音乐 › STM32

STM32

2024-07-10 23:43| 来源: 网络整理| 查看: 265

一、工作原理：

1.利用STM32的定时器PWM输出通道，驱动蜂鸣器以特定频率发声，实现播放音乐的效果。

2.C调音符与频率对照表：

3.以下为常用的七声音阶频率(Hz)：

#define MC 262 Do

#define MD 294 Re

#define ME 330 Mi

#define MF 349 Fa

#define MG 392 Sol

#define MA 440 La

#define MB 494 Si

#define MCC 523 Do

二、软件设计：

1.蜂鸣器GPIO和定时器初始化：

void PWM_Init_TIM1(u16 Psc,u16 Per) { GPIO_InitTypeDef GPIO_InitStruct; TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStruct; TIM_OCInitTypeDef TIM_OCInitStruct; RCC_APB2PeriphClockCmd(PWMA_GPIO_CLK | PWMA_TIMx_CLK,ENABLE);//开启时钟 GPIO_InitStruct.GPIO_Mode=GPIO_Mode_AF_PP; // 初始化GPIO--PA8、PA11为复用推挽输出 GPIO_InitStruct.GPIO_Pin=PWMA_GPIO_PIN ; GPIO_InitStruct.GPIO_Speed=GPIO_Speed_50MHz; GPIO_Init(PWMA_GPIO_PORT,&GPIO_InitStruct); GPIO_ResetBits(PWMA_GPIO_PORT, PWMA_GPIO_PIN); TIM_TimeBaseStructInit(&TIM_TimeBaseInitStruct); // 初始化定时器。 TIM_TimeBaseInitStruct.TIM_ClockDivision=TIM_CKD_DIV1; TIM_TimeBaseInitStruct.TIM_CounterMode=TIM_CounterMode_Up; TIM_TimeBaseInitStruct.TIM_Period=Per; //arr TIM_TimeBaseInitStruct.TIM_Prescaler=Psc; TIM_TimeBaseInit(PWMA_TIMx,&TIM_TimeBaseInitStruct); // TIM1 TIM_OCInitStruct.TIM_OCMode=TIM_OCMode_PWM1; // 初始化输出比较 TIM_OCInitStruct.TIM_OCPolarity=TIM_OCPolarity_Low; TIM_OCInitStruct.TIM_OutputState=TIM_OutputState_Enable; TIM_OCInitStruct.TIM_Pulse=Per/2; TIM_OC1Init(PWMA_TIMx,&TIM_OCInitStruct); TIM_OC1PreloadConfig(PWMA_TIMx,TIM_OCPreload_Enable);// OC1预装载寄存器使能 TIM_ARRPreloadConfig(PWMA_TIMx,ENABLE);// TIM1在ARR上预装载寄存器使能 /*Open PWM output*/ TIM_CtrlPWMOutputs(PWMA_TIMx,ENABLE);// 高级定时器专属!!!--MOE主输出使能 TIM_Cmd(PWMA_TIMx,ENABLE); // 开定时器。 buzzerQuiet(); //关闭蜂鸣器 }

2.控制蜂鸣器发声：

//compare:比较值 void TIM_SetTIM1Compare1(u32 compare) { TIM1->CCR2=compare; } //设置TIM3通道2的arr void TIM_SetTIM1Autoreload(u32 Autoreload) { TIM1->ARR=Autoreload; } void buzzerQuiet(void)//停止发声 { buzzerSound(20000, 20); // TIM1->CCR2=0; // TIM_CtrlPWMOutputs(PWMA_TIMx,DISABLE); // TIM_Cmd(PWMA_TIMx,DISABLE); } void buzzerOpen(void)//发声 { TIM_CtrlPWMOutputs(PWMA_TIMx,ENABLE); TIM_Cmd(PWMA_TIMx,ENABLE); } void buzzerSound(unsigned short usFraq,unsigned char volume_level)//发声模块 { unsigned long Autoreload; buzzerOpen(); if((usFraq20000)) { buzzerQuiet(); } else { Autoreload=(8000000/usFraq)-1; TIM_SetTIM1Autoreload(Autoreload); TIM_SetTIM1Compare1(Autoreload>>volume_level); } }

3.频率对照表宏定义：

#define LC 262 #define LD 294 #define LE 330 #define LF 349 #define LG 392 #define LA 440 #define LAP_LBN 466 #define LB 494 #define MC 523 #define MD 587 #define ME 659 #define MEP 740 #define MF 698 #define MG 784 #define MA 880 #define MAP_MBN 932 #define MB 988 #define HC 1046 #define HD 1175 #define HE 1318 #define HF 1397 #define HG 1568 #define HA 1760 #define HB 1976

4.播放音乐(爱的罗曼史)：

uint16_t romance[96]= { ME,ME,ME, ME,MD,MC, MC,LB,LA, LA,MC,ME, MA,MA,MA, MA,MG,MD, MF,ME,MD, MD,ME,MF, ME,MF,ME, MEP,MF,ME, ME,MD,MC, MC,LB,LA, LB,LB,LB, LB,MC,LB, LA,LA,LA, LA,20000,20000, ME,ME,ME, ME,MD,MC, MC,LB,LB, LB,LAP_LBN,LB, MA,MA,MA, MA,MB,MA, MA,MG,MG, MG,MA,MB, HC,HC,HC, HC,MB,MAP_MBN, MA,MA,MA, MA,ME,MD, ME,ME,ME, ME,MF,MD, MC,MC,MC, MC,20000,20000 }; void Romance(void) { uint16_t i=0; for(i=0; i

【本文地址】

STM32

STM32

今日新闻

推荐新闻