VKF332V

2024-06-15 09:44| 来源: 网络整理| 查看: 265

3‑Port Solenoid Valve, Direct Operated Poppet Type, VKF300 Series Specifications

VKF300 Series body ported type external appearance

VKF300 Series base mounted type external appearance

Output port: Set-up a manifold enabling 360° (in 90° increments) rotation of 2 (A)

Manual override is available from the valve top surface and from the side surface, allowing manual operation unaffected by mounting space and piping direction

VKF300 Series display symbol

Valve SpecificationSwitching MethodDirect operation type 2-position single solenoidFluidAirAmbient Temperature and Operating Fluid TemperatureMax 50°C*1 Response Time (at 0.5 MPa)10 ms or less (standard), 15 ms or less (low wattage type)Manual OperationNon-locking, push typeLubricationNot required (Use turbine oil class 1 ISO VG32 if lubricated)Mounting OrientationFree*2 Impact Resistance / Vibration Resistance300/50 m/s2EnclosureDust-proofElectrical SpecificationsElectrical EntryGrommet (G), DIN terminal (D)Rated VoltageAC100 V, 110 V, 200 V, 220 V, 240 VDC12 V, 24 VAllowable Voltage Fluctuation±10% of rated voltageApparent Power (AC)Starting9.5 VA / 50 Hz, 8 VA / 60 HzHolding7 VA 50 Hz, 5 VA 60 HzPower Consumption (DC)Without light4 W (standard), 2 W (low wattage type)With light4.3 W (standard), 2.3 W (low wattage type)Surge Voltage SuppressorACVaristorDCDiode (varistor for 12 V DC or less)Indicator LightACNeon bulbDCLED

*1: Based on JIS B 8374-1981 dynamic performance test. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)*When a DC solenoid and surge voltage suppressor is provided, there will be a 10 to 20‑msec delay in the OFF response time.*2: Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)

ModelValve Model NumbersOperating Pressure RangeMPaPiping connection port diameterFlow Rate CharacteristicsWeight g1 → 2 (P → A)2 → 3 (A → R)GrommetDIN typeTerminalC (dm3 / (s·bar)]bCvC (dm3 / (s·bar)]bCvBody Ported TypesVKF332 VKF3330 to 0.7M5 × 0.8 Rc 1/80.670.100.150.410.390.1180 *190 *1VKF332Y VKF333Y0.560.130.130.320.250.09VKF332E VKF333E0.560.130.130.320.250.09VKF332V VKF333V-101.2 KPa to 0.10.670.100.150.410.390.11VKF332W VKF333W0.560.130.130.320.250.09Base Mounted Type(with Sub-Plate)VKF3340 to 0.70.680.130.150.590.310.14120130VKF334Y0.560.130.130.320.250.09VKF334E0.560.130.130.320.250.09VKF334V-101.2 KPa to 0.10.680.130.150.590.310.14VKF334W0.560.130.130.320.250.09

*1: VKF33□: When brackets are included, add 10 g for each.

Drawing / Single Unit

(Unit: mm)

Body ported type / grommet: VKF332□-□G-M5 / 01 dimensional drawing

(Unit: mm)

Body ported type / DIN terminal: VKF332□-□D-M5 / 01 dimensional drawing

See grommet type for other dimensions.

(Unit: mm)

Base mounted type / grommet: VKF334□-□G-01 dimensional drawing

(Unit: mm)

Base mounted type / DIN terminal: VKF334□-□D-01 dimensional drawing

See grommet type for other dimensions.

Product Structural Drawing

VKF300 Series structural drawing

NumberPart nameMaterialNote1Solenoid Coil Assembly--2Sub-PlateDiecast aluminumFor VKF334: VKF300-S-013BodyDie-cast aluminum-4Spool/SleeveAluminum-5ManualResin-6Return SpringSUS-7Bracket AssemblySteelFor VKF332: VKF300-13A-28Gasket Assembly(with Mounting Screws)-For VKF333: VKF300-11A-2For VKF334: VKF300-11A-19Bushing AssemblyResinFor VKF333: VKF300-6A-1For VKF334: VKF300-6A-1Two sets per unit requiredPrecautionsBe sure to read the individual product cautions before use.See the SMC catalog for product information other than that detailed above.

【本文地址】

VKF332V

VKF332V

今日新闻

推荐新闻