部分论文及研究项目

Zhang, Yaoguang; Wang, Wenzhong; Liang, He; Zhao, Ziqiang, "Slip status in lubricated point-contact based on layered oil slip lubrication model". Tribology International, Vol. 144(2020): 106104, April 2020

Zhang, Haibo; Wang, Wenzhong*; Liu, Yuanqing; Zhao, Ziqiang, "Semi-analytic modelling of transversely isotropic magneto-electro-elastic materials under frictional sliding contact". Applied Mathematical Modelling. Vol. 75(2019): 116-140. November 2019.

Liu Yuanqing, Wang Wenzhong*, Zhao Ziqiang, Zhang Haibo, "The effect of meso-structure and surface topography on the indentation variability of viscoelastic composite materials ". Composite Structures. Vol. 220(2019): 81-92. July 2019.

Zhao, Ziqiang, Yin, Xuebin, Wang, Wenzhong, " Effect of the raceway defects on the nonlinear dynamic behavior of rolling bearing ". Journal of Mechanical Science and Technology. Vol. 33(6): 2511-2525. June 2019.

Zhang Yaoguang, Wang Wenzhong, Liang He, ZHAO Ziqiang, "Layered oil slip model for investigation of film thickness behaviours at high speed conditions". Tribology International. Vol. 127(2019): 137-147. March 2019.

Liu, Yuanqing, Wang Wenzhong, Zhang Haibo, ZHAO Ziqiang, "Solution of temperature distribution under frictional heating with consideration of material inhomogeneity ". Tribology International. Vol. 126(2018): 80-96. October 2018.

Wang Yunlong, Wang Wenzhong, Li Yulong., ZHAO Ziqiang, "Lubrication and Thermal Failure Mechanism Analysis in High-Speed Angular Contact Ball Bearing". Journal of Tribology. Vol. 140, no. 3: Paper No: 031503 . May 2018.

Yunlong Wang, Wenzhong Wang, Shengguang Zhang, ZHAO Ziqiang, " Effects of raceway surface roughness in an angular contact ball bearing ". Mechanism and Machine Theory. Vol. 121, 198–212. 2018.

Haibo Zhang, Wenzhong Wang, Shengguang Zhang, Ziqiang Zhao, " Semi-analytical solution of three-dimensional steady state thermoelastic contact problem of multilayered material under friction heating". International Journal of Thermal Sciences. Vol. 127(2018):384-399. May 2018.

Haibo Zhang, Wenzhong Wang, Shengguang Zhang, Ziqiang Zhao, " Semi-analytic solution of three-dimensional temperature distribution in multilayered materials based on explicit frequency response functions". International Journal of Heat and Mass Transfer. Vol. 118(2018):208-222. March 2018.

Zhang Yaoguang, Wang Wenzhong, Zhang Shengguang, ZHAO Ziqiang, "Experimental study of EHL film thickness behaviour at high speed in ball-on-ring contacts". Tribology International. Vol. 113(2017): 216-223. September 2017.

Zhang Haibo, Wang Wenzhong, Zhang Shengguang, ZHAO Ziqiang, "Modeling of elastic finite-length space rolling-sliding contact problem". Tribology International. Vol. 113(2017): 224-237. September 2017.

Zhang Haibo, Wang Wenzhong, Zhang Shengguang, ZHAO Ziqiang, "Elastohydrodynamic Lubrication Analysis of Finite Line Contact Problem with Consideration of Two Free End Surfaces". Journal of Tribology. Vol. 139, no. 3: Paper No: 031501 . May 2017.

Wang Yunlong, Wang Wenzhong, ZHAO Ziqiang, "Effect of race conformities in angular contact ball bearing". Tribology International. Vol. 104(2016): 109-120. December 2016.

Yaoguang ZHANG, Wenzhong WANG, Shengguang ZHANG, Ziqiang ZHAO, "Optical analysis of ball-on-ring mode test rig for oil film thickness measurement". Friction. Vol. 4, no.4: 324-334. December 2016.

Sheng-guang Zhang, Wen-zhong Wang, Hai-bo Zhang, Zi-qiang Zhao, "The effect of hardness distribution by carburizing on the elastic-plastic contact performance". Tribology International. Vol. 100(2016): 24-34. August 2016.

Zhang Haibo, Wang Wenzhong, Zhang Shengguang, ZHAO Ziqiang, "Modeling of Finite-Length Line Contact Problem with Consideration of Two Free-End Surfaces". Journal of Tribology. Vol. 138, no. 2: Paper No: 021402. April 2016.

Wen-zhong Wang, Sheng-guang Zhang, Zi-qiang Zhao, Si-yuan Ai, " Effect of the Inhomogeneity in Races on the Dynamic Behavior of Rolling Bearing". Journal of Vibration and Acoustics. Vol. 137(6): 1-19. December 2015.

Wang Yunlong, Wang Wenzhong, Zhang Shengguang, ZHAO Ziqiang, "Investigation of skidding in angular contact ball bearings under high speed". Tribology International. Vol. 92(2015): 404-417. August 2015.

Ai Siyuan, Wang Wenzhong, Wang Yunlong, ZHAO Ziqiang, "Temperature rise of double-row tapered roller bearings analyzed with the thermal network method". Tribology International. Vol. 87(2015): 11-22. July 2015.

Wang Wenzhong, Shen Dian, Zhang Shengguang, ZHAO Ziqiang, "Investigation of Patterned Textures in Ball-on-Disk Lubricated Point Contacts". Journal of Tribology. Vol. 137(1): 0-011502. January 2015.

Ai Siyuan, Wang Wenzhong, ZHAO Ziqiang, "Analysis of the effect of oil supply time on elastohydrodynamic lubrication performance under oil-air condition ". Tribology. Vol. 35(1): 1-7. January 2015.

Wen-zhong Wang, Lang Hu, Sheng-guang Zhang, Zi-qiang Zhao, Siyuan Ai, "Modeling angular contact ball bearing without raceway control hypothesis". Mechanism and Machine Theory. Vol. 82(2014): 154–172. December 2014.

Zhang Shengguang, Wang Wenzhong, ZHAO Ziqiang, "The effect of surface roughness characteristics on the elastic-plastic contact performance". Tribology International. Vol. 79(2014): 59-73. November 2014.

Zhang Shengguang, Wang Wenzhong, ZHAO Ziqiang, "Elastohydrodynamic Lubrication Analysis of Point Contacts With Consideration of Material Inhomogeneity". Journal of Tribology. Vol. 136, no.4: Paper No: 041501. October 2014.

高健，赵自强，王文中，“基于热四极法的涂层刀具切削温度分布研究”.中国机械工程, 2020, 31(19): 2316-2321.

韩静文，王文中，赵自强，“高速圆柱滚子轴承打滑分析”.轴承, 2020, (04): 9-14.

殷学宾，赵自强，王文中，“考虑表面缺陷的角接触球轴承非线性动力学分析”.轴承, 2019, (03): 22-29.

鄂瑞迪，赵自强，李党生，王文中，“内齿盘-齿块锁止机构运动干涉及修形的研究”. 机械设计与制造, 2018, (07): 165-171.

赵自强，王文中，张京英，“基于同伴教学法的机械设计类课程教学模式”. 机械设计, 2018, (07): 86-88.

刘俊明; 王文中; 赵自强，“基于弹流润滑模型的润滑油黏度确定方法”. 润滑与密封, 2018, (07): 7-12+30.

赵自强; 殷学宾; 王文中，“分流型内平动齿轮传动效率的理论与试验研究”. 机械传动, 2018, (06): 7-11.

崔伟勤; 赵自强; 张耀光; 梁鹤; 王文中，“牵引模式下球环点接触高速弹流润滑行为机理分析”. 摩擦学学报, 2018, (06): 619-625.

张生光; 王文中; 赵自强，“表面织构及供油量对润滑性能影响的建模分析”. 表面技术, 2017, (06): 1-8.

张帆; 王文中; 赵自强; 孔凌嘉，“渐开线直齿轮弹流润滑条件下的多轴疲劳寿命预估”. 摩擦学学报, 2017, (02): 263-269.

高元; 王文中; 赵自强; 孔凌嘉，“表面织构对滑动轴承润滑性能的影响”. 润滑与密封, 2016, 41(08): 6-13.

韩兵; 王文中; 赵自强，“低速下润滑接触区补充供油机制的研究”.摩擦学学报, 2016, 36(03): 341-347.

张生光; 王文中; 赵自强; 孔凌嘉，“考虑材料夹杂的接触问题数值分析”. 机械工程学报, 2015, (02): 21-29.

艾思源; 王文中; 赵自强，“油气条件下供油时间对弹流润滑性能的影响分析”. 摩擦学学报, 2015, 35(01): 1-7.

钱璐; 王文中; 赵自强; 孔凌嘉，“考虑滚道表面油层分布的滚动轴承润滑分析”. 摩擦学学报, 2014, 34(02): 165-172.

贾小攀; 王文中; 赵自强; 孔凌嘉，“斜齿轮弹流润滑下的接触疲劳寿命计算”. 摩擦学学报, 2014, 34(01): 8-14.

胡浪; 王文中; 赵自强; 孔凌嘉，“双列圆锥滚子轴承滚子大端-引导边润滑接触分析”. 摩擦学学报, 2013, 33(01): 22-28.

赵自强; 赵利敏; 程爱明; 张春林，“对称型内平动齿轮系统的非线性动力学分析”. 振动与冲击, 2012, 31(15): 68-74.

部分研究项目：

主持：

科技部国家重点研发计划课题：复杂动载下同步轮毂电机轴承表面润滑增效与创成机制

国家自然科学基金（No. 51405017）：考虑缺陷的高速/高精密球轴承非线性动力学行为研究

北京高校“青年英才”计划项目（YETP1230）：含缺陷滚动轴承非线性动力学研究

北京理工大学优秀青年教师资助计划项目

企业合作项目：某机构系统设计及优化

参加：

1. 国家自然基金(No. 51275046)：旋转 MEMS 微球轴承的滚动摩擦测试与减摩机制研究

2. 国家自然基金(No. 51675046)：高速/超高速弹流润滑行为与机理研究

3. 国家自然基金(No. U1637205)：空间环境下高速轴承润滑、失效机理及长寿命验证方法研究

4. 科技部973计划课题：轴承界面动态润滑接触机理及失效机制

5. 科技部国家重点研发计划课题：高速精密轴承润滑机理与润滑设计方法

6. 企业合作项目：某机械产品优化设计