Annex D (Normative) Test of real driving emissions (Type II Test) 148

Annex E (Normative) Test of crankcase emissions (Type III Test) 206

Annex F (Normative) Test of evaporative emissions (Type IV Test) 208

Annex G (Normative) Durability test of pollution control devices (Type V Test)

Annex H (Normative) Test of CO, THC and NOx exhaust emissions after a cold start at low temperature (Type VI Test)

Annex I (Normative) Test of refueling emissions (Type VII Test)

Annex J (Normative) On-board Diagnostics (OBD) System

Annex K (Normative) Specifications of reference fuels

Annex L (Normative) Special requirements for vehicles fuelled with LPG or NG

Annex M (Normative) Type test of replacement pollution control device as separate technical unit

Annex N (Normative) Requirements for ensuring conformity of production

Annex O (Normative) In-Service Conformity

Annex P (Normative) Requirements for vehicles that use a reagent for the exhaust after-treatment system

Annex Q (Normative) Emissions test procedure for a vehicle equipped with a periodically regenerating system

Annex R (Normative) Hybrid Electric Vehicle (HEV) Test

本标准适用于以点燃式发动机或压燃式发动机为动力、最大设计车速大于或等于 50 km/h 的轻型汽 车（包括混合动力电动汽车）。

本标准规定了装用点燃式发动机的轻型汽车，在常温和低温下排气污染物、实际行驶排放（RDE） 排气污染物、曲轴箱污染物、蒸发污染物、加油过程污染物的排放限值及测量方法，污染控制装置耐久 性、车载诊断（OBD）系统的技术要求及测量方法。

本标准规定了装用压燃式发动机的轻型汽车，在常温和低温下排气污染物、实际行驶排放（RDE） 排气污染物、曲轴箱污染物的排放限值及测量方法，污染控制装置耐久性、车载诊断（OBD）系统的 技术要求及测量方法。

本标准规定了轻型汽车型式检验的要求和方法，生产一致性和在用符合性检查的要求与判定方法。 本标准也规定了燃用液化石油气（LPG）或天然气（NG）轻型汽车的特殊要求。 本标准也规定了作为独立技术总成、拟安装在轻型汽车上的替代用污染控制装置，在污染物排放方面的型式检验规程。 本标准也规定了排气后处理系统使用反应剂的汽车的技术要求，以及装有周期性再生系统汽车的排放试验规程。

在生产企业的要求下，最大设计总质量超过 3 500 kg、但不超过 4 500 kg 的 M1、M2 和 N2 类汽车可按本标准进行型式检验。

若本标准适用范围车辆已按照 GB 17691（第六阶段）通过型式检验，可不按本标准进行型式检验。

使用附录 K 中未包含燃料种类的轻型汽车也应满足本标准要求。

Limits and Measurement Methods for Emissions from Diesel Fuelled Heavy-Duty Vehicles (CHINA VI)

CONTENTS

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 Requirements for Pollution Control

5 Engine (Vehicle) Label

6 Specifications and Tests

7 Installation on the Vehicle

8 Family and Parent Engine

9 Compliance Requirements and Inspection of Newly Produced Vehicles

10 Requirements and Inspection of In-Service Conformity

11 Implementation of This Standard

Annex A (Normative) Information on Type Test

Annex B (Informative) Format of Type Test Report

Annex C (Normative) Test Procedure for Standard Engine Cycle

Annex D (Normative) Specifications of Reference Fuels

Annex E (Normative) Testing Requirements for Engine Off-Cycle Emissions (OCE)

Annex F (Normative) On-Board Diagnostic System (OBD)

Annex G (Normative) Requirements for Correct Operation of NOx Control System

Annex H (Normative) Durability of Engine Systems

Annex I (Normative) Requirements for Ensuring Conformity of Production and Inspections

Annex J (Normative) Technical Requirements for In-Service Conformity

Annex K (Normative) Procedure for Real Road Emissions Testing with Portable Emissions Measurement System (PEMS)

Annex L (Normative) Emission Measurement Method on Vehicle Chassis Dynamometer

Annex M (Normative) Special Requirements for Type Test of LPG or NG Fuelled Engines and Vehicles

Annex N (Normative) Technical Requirements for Diesel-Gas Dual-Fuel Engines and Vehicles

Annex O (Normative) Type Test of Replacement Pollution Control Devices as Separate Technical Unit

Annex P (Normative) Access to Vehicle OBD and Maintenance Information

Annex Q (Normative) Technical Specifications of Remote Emission Management Vehicle Terminal and Communication Data Format

本标准规定了装用压燃式发动机汽车及其发动机所排放的气态和颗粒污染物的排放限值及测试方法， 以及装用以天然气（NG）或液化石油气（LPG）作为燃料的点燃式发动机汽车及其发动机所排放的气态污染物的排放限值及测量方法。

本标准适用于装用压燃式、气体燃料点燃式发动机的M2、M3、N1、N2和N3类及总质量大于3 500kg的M1类汽车及其发动机的型式检验、生产一致性检查、新生产车排放监督检查和在用车符合性检查。

按本标准进行的整车型式检验可以扩展至基准质量超过2 380 kg的变型、改装车辆。

若装用压燃式、气体燃料点燃式发动机的M1、M2、N1和N2类汽车己经按GB 18352.6-2016进行了型式检验，可不按本标准进行型式检验。

Emissions Control Technical Requirements of Non-Road Diesel Mobile Machinery

CONTENTS

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 Requirements for Pollution Control

5 Specifications and Tests

6 Installation on the Machine

7 Requirements and Check for Emission Compliance of Newly Produced Machine (Engine)

8 In-Service Conformity (ISC) Requirements and Check

9 Machine Environmental Information Label

10 Family

Annex A (Normative) Information on Type Test

Annex B (Normative) Bench Test Procedure

Annex C (Normative) Requirements to Ensure the Correct Operation of NOx Control Measures

Annex D (Normative) Requirements to Ensure the Correct Operation of Particulate Control Measures

Annex E (Normative) PEMS Testing Procedure and Requirements

Annex F (Normative) Conformity of Production Assurance Requirements and Check

Annex G (Normative) Technical Requirements for In-Service Conformity

Annex H (Normative) Technical Requirements for Onboard Terminal

Annex I (Normative) Machine Environmental Information Label

Annex J (Normative) Technical Requirements for Confirmatory Check

Annex K (Normative) Machine Environmental Identification Number (MEIN)

本标准规定了第四阶段非道路柴油移动机械（以下简称机械）及其装用的柴油机和在道路上用于载人（货）的车辆装用的第二台柴油机的污染物排放控制技术要求。

本标准适用于以下（包括但不限于）机械及其装用的在非恒定转速下工作的柴油机的型式检验、生产一致性检查、排放达标检查、在用符合性检查和耐久性要求，如：

— 工程机械（包括挖掘机械、铲土运输机械、起重机械、叉车、压实机械、路面施工与养护机械、混凝土机械、掘进机械、桩工机械、高空作业机械、凿岩机械等）；

— 农业机械（包括拖拉机、联合收割机等）；

— 林业机械；

— 机场地勤设备；

— 材料装卸机械；

— 雪犁装备；

— 工业钻探设备。 本标准适用于以下（包括但不限于）机械及其装用的在恒定转速下工作的柴油机的型式检验、生产一致性检查、排放达标检查、在用符合性检查和耐久性要求，如：

— 空气压缩机；

— 发电机组；

— 渔业机械（增氧机、池塘挖掘机等）；

— 水泵。

三轮汽车及其装用的柴油机、额定净功率小于 37kW 的船舶及其装用的柴油机执行本标 准。

Limits and Measurement Methods for Emissions from Gasoline Vehicles under Two-Speed Idle Conditions and Short Driving Mode Conditions

CONTENTS

Foreword

1 Application Scope

2 Normative References

3 Terms and Definitions

4 Inspection Items

5 Inspection Procedure and Requirements

6 Visual Inspection

7 OBD system Inspection

8 Exhaust Emissions Test

9 Requirements for Data Record, Storage and Submission

10 Monitoring on the Emissions from In-Use Vehicles

11 Implementation of this Standard

Annex A (Normative) Two-Speed Idle Test

Annex B (Normative) Steady-State Loaded Mode Test

Annex C (Normative) Transient Loaded Mode Test

Annex D (Normative) Short Transient Loaded Mode Test

Annex E (Normative) Evaporative Emission Control System (EECS) Test

Annex F (Normative) OBD system Inspection Procedure

Annex G (Normative) Inspection Report

Annex H (Normative) Real-time Reporting Data Items

本标准规定了汽油车双怠速法 、稳态工况法 、瞬态工况法和简易瞬态工况法排气污染物排放限值及测量方法。本标准同时规定了汽油车外观检验 、OBD 检查 、燃油蒸发排放控制系统检测的方法和判定依据 。

本标准适用于新生产汽车下线检验 、注册登记检验和在用汽车检验 。本标准也适用于其他装用点燃 式发动机的汽车 。

Limits and Measurement Methods for Emissions form Diesel Vehicles under Free Acceleration and Lug down Cycle

CONTENTS

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 Inspection Items

5 Inspection Procedure and Requirements

6 Visual Inspection

7 OBD system Inspection

8 Exhaust Emissions Test

9 Requirements for Data Record, Storage and Submission

10 Monitoring on the Emissions from In-Use Vehicles

11 Implementation of this Standard

Annex A (Normative) Free Acceleration Test

Annex B (Normative) Lug-down Test

Annex C (Normative) Characteristics and Installation Requirements of Opacity Meter

Annex D (Normative) Ringelmann Smoke Chart

Annex E (Normative) OBD system Inspection Procedure

Annex F (Normative) Inspection Report

Annex G (Normative) Real-time Reporting Data Items

本标准规定了柴油车自由加速法和加载减速法排气污染物排放限值及测量方法,以及柴油车外观检验、OBD 检查的方法和判定依据。

本标准适用于新生产柴油汽车下线检验、注册登记检验和在用汽车检验。

本标准也适用于其他装用压燃式发动机的汽车。 本标准不适用于低速货车和三轮汽车。

Limits and Measurement Methods for Exhaust Smoke from Non-Road Mobile Machinery Equipped with Diesel Engine

CONTENTS

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 Limits for Exhaust Smoke

5 Inspection Methods

6 Judgment Criteria

7 Administrative Requirements

8 Requirements for Inspection Instrumentation

9 Requirements for Fuel Used for Inspection

10 Inspection Report

Annex A (Normative) Inspection Report

Annex B (Normative) Ringelmann Smoke Method

本标准规定了非道路移动柴油机械和车载柴油机设备的排气烟度限值及测量方法。

本标准适用于在用非道路移动柴油机械和车载柴油机设备的排气烟度检验。新生产和进口非道路移动柴油机械的排气烟度检查参照使用。 本标准适用于以下（包括但不限于）装用在非恒定转速下工作的柴油机的非道路移动柴油机械：

—— 工程机械（包括装载机、挖掘机、推土机、压路机、沥青摊铺机、叉车、非公路用卡车等）；

—— 农业机械；

—— 林业机械；

—— 材料装卸机械；

—— 工业钻探设备；

—— 雪犁装备；

—— 机场地勤设备。 本标准适用于以下（包括但不限于）装用在恒定转速下工作的柴油机的非道路移动柴油机械：

—— 空气压缩机；

—— 发电机组；

—— 渔业机械；

—— 水泵。

Limits and Measurement Methods for Motorcycle Pollutant Discharge (China stage IV)

CONTENTS

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 Type Test and Disclosure of Test Information

5 General Requirements

6 Type Test Requirements

7 Conformity of Production (COP) Check

8 Type Extension

9 In-Service Conformity

10 Implementation of the Standard

Annex A (Normative) Information on Type Test

Annex B (Normative) Type Test Result

Annex C (Normative) Test of Tailpipe Emissions after a Cold Start at Normal Temperature (Type I Test)

Annex D (Normative) Two-Speed Idle Test or Free Acceleration Smoke Test (Type II Test)

Annex E (Normative) Evaporative Emission Test (Type IV Test)

Annex F (Normative) Durability Test of Emission Control Devices (Type V Test)

Annex G (Normative) On-Board Diagnostic (OBD) System

Annex H (Normative) Specifications of Reference Fuels

Annex I (Normative) Requirements for Ensuring Conformity of Production

Annex J (Normative) Requirements for Type Extension

本标准规定了装用点燃式发动机的摩托车排气污染物、蒸发污染物的排放限值及测量方法，以及曲轴箱排放要求、污染控制装置的耐久性要求和车载诊断（OBD）系统的技术要求。

本标准规定了装用压燃式发动机的三轮摩托车排气污染物的排放限值及测量方法，以及污染控制装置的耐久性要求和车载诊断（OBD）系统的技术要求。

本标准规定了摩托车型式检验的要求、生产一致性的检查与判定方法。

本标准适用于以点燃式发动机为动力，最大设计车速大于50 km/h 或排量大于50 ml 的摩托车，和以压燃式发动机为动力，最大设计车速大于50 km/h 或排量大于50ml 的三轮摩托车。

Limits and Measurement Methods for Emissions from Mopeds (China IV)

CONTENTS

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 Type Test and Disclosure of Test Information

5 General Requirements

6 Type Test Requirements

7 Conformity of Production (COP) Check

8 Type Extension

9 In-Service Conformity

10 Implementation of the Standard

Annex A (Normative) Information on Type Test

Annex B (Normative) Type Test Result

Annex C (Normative) Test of Tailpipe Emissions after a Cold Start at Normal Temperature (Type I Test)

Annex D (Normative) Two-Speed Idle Test (Type II Test)

Annex E (Normative) Evaporative Emission Test (Type IV Test)

Annex F (Normative) Durability Test of Emission Control Devices (Type V Test)

Annex G (Normative) On-Board Diagnostic (OBD) System

Annex H (Normative) Specifications of Reference Fuels

Annex I (Normative) Requirements for Ensuring Conformity of Production

Annex J (Normative) Requirements for Type Extension

本标准规定了轻便摩托车排气污染物、蒸发污染物的排放限值及测量方法，以及曲轴箱排放要求、污染控制装置的耐久性要求和车载诊断（OBD)系统的技术要求。

本标准规定了轻便摩托车型式检验的要求、生产一致性的检查与判定方法。

本标准适用于以点燃式发动机为动力，发动机排量不大于50 ml、最大设计车速不大于50 km/h的两轮或三轮轻便摩托车。

Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery (CHINA III, IV)

CONTENTS

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 Application and approval of type-approval

5 Specifications and tests

6 Conformity of production assessment

7 Diesel engine markings

8 Parameters defining the engine family

9 Selection of the parent engine

10 Implementation of the standard

Annex A (Normative) Application document of type approval

Appendix AA (Normative) Essential characteristics of the diesel engine/parent engine and information concerning test

Appendix AB (Normative) Essential characteristics of the engine family

Appendix AC (Normative) Essential characteristics of engine type within the family

Annex B (Normative) Test Procedure

Appendix BA (Normative) Measurement and Sampling Procedures

Appendix BB (Normative) Calibration Procedure

Appendix BC (Normative) Data Determination and Calculations

Appendix BD (Normative) Durability Requirements

Appendix BE (Normative) Specifications of NRTC Engine Dynamometer Settings

Annex C (Normative) Gaseous and Particulate Sampling Systems

Annex D (Normative) Specifications of Reference Fuel

Annex E (Normative) Equipment and auxiliaries to be installed on engines for power test

Annex F (Normative) Type-Approval Certificate

Annex G (Normative) Conformity of production

Annex H (Informative) Bibliography

本标准规定了非道路移动机械用柴油机（含额定净功率不超过37kW的船用柴油机）和在道路上用于载人（货）的车辆装用的第二台柴油机排气污染物排放限值及测量方法。

本标准适用于以下（包括但不限于）非道路移动机械装用，在非恒定转速下工作的柴油机的型式核准、生产一致性检查和耐久性要求，如：

— 工业钻探设备；

— 工程机械（包括装载机，推土机，压路机，沥青摊铺机，非公路用卡车，挖掘机、叉车等）；

— 农业机械（包括大型拖拉机、联合收割机等）；

— 林业机械；

— 材料装卸机械；

— 雪犁装备；

— 机场地勤设备。

本标准适用于以下（包括但不限于）非道路移动机械装用的，在恒定转速下工作的柴油机的型式核准、生产一致性检查和耐久性要求，如：

— 空气压缩机；

— 发电机组；

— 渔业机械（增氧机、池塘挖掘机等）；

— 水泵。

Test Procedures and Requirement of Durability of Emission Control Systems for Heavy-duty Vehicles

本标准规定了重型汽车排气污染物排放控制系统耐久性要求及试验方法。

本标准适用于采用排气后处理装置、设计车速大于25km/h 的M2、M3、N2 和N3 类及总质量大于3500kg 的M1 类机动车的型式核准和生产一致性检查对排气污染物排放控制系统耐久性的考核。

凡采用排气后处理装置的机动车按GB14762-2002或GB17691-2001第II阶段、或者GB17691-2005第III阶段进行型式核准和生产一致性检查时，应满足本标准对排气污染物排放控制系统耐久性的要求。

以独立技术总成进行型式核准的排气后处理装置，可执行本标准。返回搜狐，查看更多