We put the Xiaomi 13 through our rigorous DXOMARK Battery test suite to measure its performance in autonomy, charging and efficiency. In these test results, we will break down how it fared in a variety of tests and several common use cases.

Key specifications:

Scoring

Sub-scores and attributes included in the calculations of the global score.

221

195

198

224

212

205

194

Key performances

These key points are derived from the lab measurements during testing and do not figure into the overall score. The lab measurements, however, are used for the overall score.

The Xiaomi 13 battery achieved a very good global score, much better than its predecessor the Xiaomi 12.

This was mainly due to decent autonomy, which lasted a good 53 hours and 50 minutes when used moderately. The device showed good performances when streaming videos and when used on-the-go, but the autonomy was quite poor when listening to music.

The charging experience was very strong for both wired and wireless chargers. Both charging methods were very fast, with the wired one taking less than 47 minutes, and the wireless 56 minutes to fully charge the battery. Moreover, a quick 5-minute charge provided an autonomy of 5 hours and 28 minutes on average, which was better than our database average.

The wired and wireless charge efficiencies were good, but the residual power drain when the device was fully charged and still on the wireless stand was high. Discharge currents were all below average, especially when streaming videos, except when calling and streaming music, meaning that the device is well-optimized.

When compared with devices from the Premium segment, the Xiaomi 13 ranks in third place in database. It showed good autonomy (especially on the go, where is achieved a top score for the segment), excellent efficiency and a good charging experience.

About DXOMARK Battery tests: For scoring and analysis in our smartphone battery reviews, DXOMARK engineers perform a variety of objective tests over a week-long period both indoors and outdoors. (See our introductory and how we test articles for more details about our smartphone Battery protocol.)

The following section gathers key elements of our exhaustive tests and analyses performed in DXOMARK laboratories. Detailed performance evaluations under the form of reports are available upon request. Do not hesitate to contact us.

Xiaomi 13

195

Autonomy score is composed of three performance sub-scores: Home / Office, On the go, and Calibrated use cases. Each sub-score comprises the results of a comprehensive range of tests for measuring autonomy in all kinds of real-life scenarios.

Xiaomi 13

221

A robot housed in a Faraday cage performs a set of touch-based user actions during what we call our “typical usage scenario” (TUS) — making calls, video streaming, etc. — 4 hours of active use over the course of a 16-hour period, plus 8 hours of “sleep.” The robot repeats this set of actions every day until the device runs out of power.

Xiaomi 13

195

Using a smartphone on the go takes a toll on autonomy because of extra “hidden” demands, such as the continuous signaling associated with cellphone network selection, for example. DXOMARK Battery experts take the phone outdoors and perform a precisely defined set of activities while following the same three-hour travel itinerary (walking, taking the bus, the subway…) for each device

Xiaomi 13

198

For this series of tests, the smartphone returns to the Faraday cage and our robots repeatedly perform actions linked to one specific use case (such as gaming, video streaming, etc.) at a time. Starting from an 80% charge, all devices are tested until they have expended at least 5% of their battery power.

Xiaomi 13

218

Charging is fully part of the overall battery experience. In some situations where autonomy is at a minimum, knowing how fast you can charge becomes a concern. The DXOMARK Battery charging score is composed of two sub-scores, (1) Full charge and (2) Quick boost.

Xiaomi 13

224

Full charge tests assess the reliability of the battery power gauge; measure how long and how much power the battery takes to charge from zero to 80% capacity, from 80 to 100% as shown by the UI, and until an actual full charge.

Xiaomi 13

212

With the phone at different charge levels (20%, 40%, 60%, 80%), Quick boost tests measure the amount of charge the battery receives after being plugged in for 5 minutes. The chart here compares the average autonomy gain from a quick 5-minute charge.

Xiaomi 13

154

The DXOMARK power efficiency score consists of two sub-scores, Charge up and Discharge rate, both of which combine data obtained during robot-based typical usage scenario, calibrated tests and charging evaluation, taking into consideration the device’s battery capacity. DXOMARK calculate the annual power consumption of the product, shown on below graph, which is representative of the overall efficiency during a charge and when in use.

Xiaomi 13

205

The charge up sub-score is a combination of four factors: the overall efficiency of a full charge, related to how much energy you need to fill up the battery compared to the energy that the battery can provide; the efficiency of the travel adapter when it comes to transferring power from an outlet to your phone; the residual consumption when your phone is fully charged and still plugged into the charger; and the residual consumption of the charger itself, when the smartphone is disconnected from it. The chart here below shows the overall efficiency of a full charge in %.

Xiaomi 13

194

The discharge subscore rates the speed of a battery’s discharge during a test, which is independent of the battery’s capacity. It is the ratio of a battery’s capacity divided by its autonomy. A small-capacity battery could have the same autonomy as a large-capacity battery, indicating that the device is well-optimized, with a low discharge rate.