小白自制Linux开发板(F1C200s)整理系列,持续更新中 / 全志 SOC / WhyCan Forum(哇酷开发者社区) |
您所在的位置:网站首页 › 小白论坛官网 › 小白自制Linux开发板(F1C200s)整理系列,持续更新中 / 全志 SOC / WhyCan Forum(哇酷开发者社区) |
楼主 我编译Linux系统,按照你的步骤,但是最后uboot没有识别到系统,可以请你帮忙看看吗?小白,不太懂U-Boot SPL 2018.01-05679-g013ca457fd-dirty (Dec 18 2021 - 06:00:26)DRAM: 32 MiBTrying to boot from MMC1 U-Boot 2018.01-05679-g013ca457fd-dirty (Dec 18 2021 - 06:00:26 -0500) Allwinner Technology CPU: Allwinner F Series (SUNIV)Model: QL's f1c100sDRAM: 32 MiBMMC: SUNXI SD/MMC: 0*** Warning - bad CRC, using default environment In: serial@1c25000Out: serial@1c25000Err: serial@1c25000Net: No ethernet found.starting USB...No controllers foundHit any key to stop autoboot: 0 switch to partitions #0, OKmmc0 is current deviceScanning mmc 0:1...reading /suniv-f1c100s-licheepi-nano.dtb3607 bytes read in 27 ms (129.9 KiB/s)starting USB...No controllers foundUSB is stopped. Please issue 'usb start' first.starting USB...No controllers foundNo ethernet found.missing environment variable: pxeuuidmissing environment variable: bootfileRetrieving file: pxelinux.cfg/00000000No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/0000000No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/000000No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/00000No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/0000No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/000No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/00No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/0No ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/default-arm-sunxiNo ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/default-armNo ethernet found.missing environment variable: bootfileRetrieving file: pxelinux.cfg/defaultNo ethernet found.Config file not foundstarting USB...No controllers foundNo ethernet found.No ethernet found.=> 另外 你在编译系统时有什么配置吗 我看你没有写 我就用没改 然后系统是直接复制到BOOT文件夹下的 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |