Python Selenium.WebDriver 浏览器启动参数设置『Edge如何使用启动参数』 |
您所在的位置:网站首页 › 如何用浏览器打开图片权限设置 › Python Selenium.WebDriver 浏览器启动参数设置『Edge如何使用启动参数』 |
Python Selenium.WebDriver 浏览器启动参数设置『Edge如何使用启动参数』
文章目录
Python Selenium.WebDriver 浏览器启动参数设置『Edge如何使用启动参数』一、浏览器启动参数设置🍿二、WebDriver 实例化参数🥑三、浏览器启动参数大全四、Edge浏览器使用启动参数与源码剖析五、对启动参数选项进行封装🍌六、无头浏览器七、自动化程序控制的提示「扩展」参考资料💟相关博客😏
一、浏览器启动参数设置🍿
在创建 WebDriver 实例时,可以配置它的启动参数以进行一些初始设置,这些设置将会在 WebDriver 的整个生命周期内生效 对于不同类型的浏览器,WebDriver 传入的参数并不相同,但主要的几个参数是一样的 那么浏览器启动参数设置能做些什么呢,举两个例子: Selenium 默认在启动浏览器的时候,浏览器是以窗口化运行的,可对于页面点击或则进行动作链操作的时候,需要将浏览器最大化,在 Selenium 中有内置的方法maximize_window()可以将浏览器最大化,但这是在启动浏览器之后将其的最大化行为,那么有没有方法能在启动浏览器时默认就是最大化呢,这时候 浏览器启动参数设置 就派上用场了,只需要在启动浏览器的时候传入参数值--start-maximized即可在 Selenium 调用的浏览器不难发现会在浏览器上方带一个自动化提示条![]() Selenium 支持的浏览器种类有很多,这里挑出 Chome「谷歌」浏览器 以及 Edge 浏览器 来讲 1)、Chome浏览器部分 webdriver.Chrome(executable_path=“chromedriver”, port=0, options=None, service_args=None, desired_capabilities=None, service_log_path=None, chrome_options=None, keep_alive=True) 参数如下: executable_path:浏览器驱动程序路径,如果没有制定,则默认使用环境变量PATH中设置的路径 options:启动选项 (Options对象通常位于各浏览器的 WebDriver 模块下,列如:from selenium.webdriver.浏览器名称.options import Options),建议优先使用options 参数来设置浏览器(options 基于 capabilities,在实例化某个浏览器的Options对象时会自动写入该浏览器预设的 capabilities) desired_capabilities:类似于 options 参数,主要在早期版本的 Selenium 中使用,现在推荐使用 options 参数,只有在实例化 RemoteWebDriver(远程运行系统不定或则浏览器不定) 时,才使用此参数 chrome_options:完全等同于 options 参数,此参数是早期版本 Selenium 使用的参数,现在的版本已不推荐使用 port:驱动程序启用的端口号,如果不填写,则自动使用任意闲置的端口号,默认参数为0 service_args:浏览器驱动程序的参数,根据所使用的浏览器驱动不同,参数也有可能不同。 打开命令提示符窗口,在驱动程序所在路径下运行 "驱动程序文件名" --help 即可查看驱动程序所支持的参数,如下图在D盘根目录下有着名为 chromedriver 94 的驱动程序文件,查看其支持参数 需要注意的是,驱动程序文件名最好加上双引号反正出错 service_log_path:驱动程序存放日志文件的位置 keep_alive:表示在与 ChromeDriver 进行链接时,是否带上 HTTP 请求头Connection: keep-alive,既是否使用长链接,布尔类型参数,默认值为True 源码:👇 def __init__(self, executable_path="chromedriver", port=0, options=None, service_args=None, desired_capabilities=None, service_log_path=None, chrome_options=None, keep_alive=True): """ Creates a new instance of the chrome driver. Starts the service and then creates new instance of chrome driver. :Args: - executable_path - path to the executable. If the default is used it assumes the executable is in the $PATH - port - port you would like the service to run, if left as 0, a free port will be found. - options - this takes an instance of ChromeOptions - service_args - List of args to pass to the driver service - desired_capabilities - Dictionary object with non-browser specific capabilities only, such as "proxy" or "loggingPref". - service_log_path - Where to log information from the driver. - chrome_options - Deprecated argument for options - keep_alive - Whether to configure ChromeRemoteConnection to use HTTP keep-alive. """演示代码:👇 实例化浏览器 WebDriver chrome_path = r"chromedriver.exe" # 相对路径下 browser = webdriver.Chrome(executable_path=chrome_path)传入 设置浏览器默认以最大化窗口运行 启动参数 edge_path = r"chromedriver.exe" # 相对路径下 options = Options() options.add_argument("--start-maximized") # 添加最大化窗口运作参数 browser = webdriver.Chrome(executable_path=edge_path, options=options)2)、Edge浏览器部分 webdriver.Edge(executable_path=‘MicrosoftWebDriver.exe’, capabilities=None, port=0, verbose=False, service_log_path=None, log_path=None, keep_alive=False) 参数如下: executable_path:浏览器驱动程序路径,如果没有制定,则默认使用环境变量PATH中设置的路径capabilities:非浏览器特定的字典对象,传入浏览器启动参数时需要使用到port:驱动程序启用的端口号,如果不填写,则自动使用任意闲置的端口号,默认参数为0verbose:是否在服务中设置详细日志记录service_log_path:驱动程序存放日志文件的位置log_path:不推荐使用的 service_log_path 参数keep_alive:表示在与 EdgeDriver 进行链接时,是否带上 HTTP 请求头Connection: keep-alive,既是否使用长链接,布尔类型参数,默认值为True
演示代码:👇 实例化浏览器 WebDriver edge_path = r"msedgedriver.exe" # 相对路径下 browser = webdriver.Edge(executable_path=edge_path)传入 设置浏览器默认以最大化窗口运行 启动参数 edge_path = r"chromedriver.exe" # 相对路径下 options = { "browserName": "MicrosoftEdge", "version": "", "platform": "WINDOWS", "ms:edgeOptions": { "extensions": [], "args": ["--start-maximized"] # 添加最大化窗口运作参数 } } browser = webdriver.Edge(executable_path=edge_path, capabilities=options) 三、浏览器启动参数大全主要以 Chrome 为例,介绍各个启动参数的作用,在这里也推荐大家优先使用 Chrome 浏览器 常用的参数选项 序号参数选项描述1--user-agent="客户端代理类型”设置请求头的 User-Agent,多用于响应式站点或根据 User-Agent 判断是否移动设备而返回不同网页的场景2--window-size=宽度值,高度值设置浏览器的默认窗口大小3--headless无界面运行(无窗口),也叫无头浏览器,通常用于远程运行,在本地运行也可以通过该参数提升运行效率4--disable-gpu禁用GPU加速5--disable-gpu-program-cache禁用GPU程序缓存6--start-maximized设置浏览器默认以最大化窗口运行7--incognito设置浏览器以隐身模式(无痕模式运行)8--disable-javascript禁用Javascript代码运行9--disable-infobars禁用浏览器正在被自动化程序控制的提示(新版本已失效)10--enable-automation通知用户他们的浏览器是由自动测试控制的对于更多的浏览器启动参数,请参考这篇文章 Chrome浏览器启动参数大全 对于 Edge 浏览器由于使用的也是 Chromium 内核,对于 Chrome 的启动参数大部分是通用的,我自己比较习惯且常用的也是 Edge 浏览器,这也是我在文章中加入了对该浏览器的使用讲解的原因之一 四、Edge浏览器使用启动参数与源码剖析对于Edge浏览器,在 二、WebDriver 实例化参数 中就能发现其实少了 options、desired_capabilities、chrome_options这三个参数,相反多出了一个capabilities,那么该如何使用浏览器启动参数呢? (一)、先看看对于 Chrome 浏览器中的源码: options、desired_capabilities、chrome_options这三个参数之间很容易让人疑惑,但查看下面的源码之后就能很快明白它们之间的关系 if chrome_options: warnings.warn('use options instead of chrome_options', DeprecationWarning, stacklevel=2) options = chrome_options if options is None: # desired_capabilities stays as passed in if desired_capabilities is None: desired_capabilities = self.create_options().to_capabilities() else: if desired_capabilities is None: desired_capabilities = options.to_capabilities() else: desired_capabilities.update(options.to_capabilities())可以看到,chrome_options 在源码中有一句警告'use options instead of chrome_options',表示请使用 options 参数来代替 chrome_options 参数,最后实际上 chrome_options 赋值给了 options,两者完全相同 然后是关于 desired_capabilities 的处理,在 desired_capabilities 为空时,会将 options 转换为 desired_capabilities,已有 desired_capabilities 则合并 options 对于Chome浏览器的 Options 对象,我们主要看源码中这几个方法和属性 class Options(object): KEY = "goog:chromeOptions" def __init__(self): self._binary_location = '' self._arguments = [] self._extension_files = [] self._extensions = [] self._experimental_options = {} self._debugger_address = None self._caps = DesiredCapabilities.CHROME.copy() ...... @property def extensions(self): """ Returns a list of encoded extensions that will be loaded into chrome """ encoded_extensions = [] for ext in self._extension_files: file_ = open(ext, 'rb') # Should not use base64.encodestring() which inserts newlines every # 76 characters (per RFC 1521). Chromedriver has to remove those # unnecessary newlines before decoding, causing performance hit. encoded_extensions.append(base64.b64encode(file_.read()).decode('UTF-8')) file_.close() return encoded_extensions + self._extensions def add_extension(self, extension): """ Adds the path to the extension to a list that will be used to extract it to the ChromeDriver :Args: - extension: path to the \*.crx file """ if extension: extension_to_add = os.path.abspath(os.path.expanduser(extension)) if os.path.exists(extension_to_add): self._extension_files.append(extension_to_add) else: raise IOError("Path to the extension doesn't exist") else: raise ValueError("argument can not be null") ...... def to_capabilities(self): """ Creates a capabilities with all the options that have been set and returns a dictionary with everything """ caps = self._caps chrome_options = self.experimental_options.copy() chrome_options["extensions"] = self.extensions if self.binary_location: chrome_options["binary"] = self.binary_location chrome_options["args"] = self.arguments if self.debugger_address: chrome_options["debuggerAddress"] = self.debugger_address caps[self.KEY] = chrome_options return caps1)、添加浏览器参数要用到的方法是 to_capabilities,如果想要添加一个 设置浏览器默认以最大化窗口运行,写法是: options = Options() options.add_extension("--start-maximized")2)、to_capabilities 方法代码内部使用到了 extensions方法,作用是将对象转化为 webdriver 实例化时能够识别的字典,格式如下所示: options = { "browserName": "MicrosoftEdge", "version": "", "platform": "WINDOWS", "ms:edgeOptions": { "extensions": [], "args": ["--start-maximized"] # 添加最大化窗口运作参数 } }(二)、Edge浏览器使用启动参数: 为什么要来讲这个呢,我们先开看看 options 的源码,结合 二、WebDriver 实例化参数 中的 Edge浏览器部分 1)、Edge下 options 源码 class Options(object): def __init__(self): self._page_load_strategy = "normal" self._caps = DesiredCapabilities.EDGE.copy() @property def page_load_strategy(self): return self._page_load_strategy @page_load_strategy.setter def page_load_strategy(self, value): if value not in ['normal', 'eager', 'none']: raise ValueError("Page Load Strategy should be 'normal', 'eager' or 'none'.") self._page_load_strategy = value @property def capabilities(self): return self._caps def set_capability(self, name, value): """Sets a capability.""" self._caps[name] = value def to_capabilities(self): """ Creates a capabilities with all the options that have been set and returns a dictionary with everything """ caps = self._caps caps['pageLoadStrategy'] = self._page_load_strategy return caps可以看到在 Edge 下的 option 参数选项类并没有添加启动参数 add_extension 方法,且实例 Edge 驱动与实例 Chrome 驱动时所能传入的参数各不相同,如 options 参数 Edge 驱动实例是通过 capabilities 参数来传入启动参数,但传入的类型必须是格式能够被识别的字典类型,参考上述提到过的 chrome.option 下的 to_capabilities 方法 2)、手动添加启动参数 Edge 启动参数字典如下所示: options = { "browserName": "MicrosoftEdge", "version": "", "platform": "WINDOWS", "ms:edgeOptions": { "extensions": [], "args": [] } }浏览器启动参数写在 ms:edgeOptions -> args 的列表里,如添加一个最大化窗口运作参数,再将此字典传入 Edge 驱动实例化参数里:👇 edge_path = r"chromedriver.exe" # 相对路径下 options = { "browserName": "MicrosoftEdge", "version": "", "platform": "WINDOWS", "ms:edgeOptions": { "extensions": [], "args": ["--start-maximized"] # 添加最大化窗口运作参数 } } browser = webdriver.Edge(executable_path=edge_path, capabilities=options)3)、编写辅助函数 可以编写一个辅助函数来帮助我们传入启动参数 def get_options(params): """ Edge浏览器添加启动参数辅助函数 :param params: 启动参数,为字符串类型直接添加,为列表或元组类型添加多个 :return: 添加启动参数后的字典 """ options = { "browserName": "MicrosoftEdge", "version": "", "platform": "WINDOWS", "ms:edgeOptions": { "extensions": [], "args": [] } } if isinstance(params, str): options["ms:edgeOptions"]["args"].append(params) elif isinstance(params, (list, tuple)): # 利用集合去重 params = list(set(params)) options["ms:edgeOptions"]["args"].extend(params) return options 五、对启动参数选项进行封装🍌在上述内容中,我们得知了浏览器启动参数的原理后,我们就可以将 Chrome 和 Edge 参数选项类 Options 进行再一步的扩展和封装,通过这种形式就可以弥补某些浏览器启动参数类方法不全的问题,或编写提升效率的方法 Chrome 浏览器参数选项类 对于 Chrome 浏览器的 Options 参数选项类来说,功能方法已经很全了,我们只需要继承这个类,并在此基础上增加一个同时添加多个浏览器参数的方法即可 class ChromeOptions(Options): def add_argument(self, argument): """ 添加浏览器参数 :param argument: 启动参数 """ if argument: if self._is_infobars(argument): self._enable_infobars() self._arguments.append(argument) else: raise ValueError("argument参数不能为空") def add_arguments(self, arguments: list or tuple): """ 同时添加多个浏览器参数 :param arguments: 启动参数集 """ if arguments: if isinstance(arguments, str): self.add_argument(arguments) else: for arg in arguments: if self._is_infobars(arg): self._enable_infobars() self.add_argument(arg) else: raise ValueError("argument参数不能为空") @staticmethod def _is_infobars(string): return string == "--disable-infobars" def _enable_infobars(self): """ 启用'禁用浏览器正在被自动化程序控制的提示'启动参数 """ self._experimental_options["excludeSwitches"] = ["enable-automation"]Edge 浏览器参数选项类 对于 Edge 浏览器来说,其下的 Options 参数选项类的方法就少的可怜,主要的 add_argument 方法并不存在,那咱直接编写一个属于我们自己的 Options 参数选项类,将几个主要的属性以及方法写上,添加自己自定义的方法即可 from selenium.webdriver.common.desired_capabilities import DesiredCapabilities class EdgeOptions: KEY = "ms:edgeOptions" def __init__(self): self._arguments = [] self._experimental_options = {} self._caps = DesiredCapabilities.EDGE.copy() @property def arguments(self): return self._arguments @property def experimental_options(self): return self._experimental_options def add_argument(self, argument): """ 添加浏览器参数 :param argument: 启动参数 """ if argument: if self._is_infobars(argument): self._enable_infobars() else: self._arguments.append(argument) else: raise ValueError("argument参数不能为空") def add_arguments(self, arguments: list or tuple): """ 同时添加多个浏览器参数 :param arguments: 启动参数集 """ if arguments: if isinstance(arguments, str): self.add_argument(arguments) else: for arg in arguments: if self._is_infobars(arg): self._enable_infobars() else: self._arguments.append(arg) else: raise ValueError("argument参数不能为空") @staticmethod def _is_infobars(string): return string == "--disable-infobars" def _enable_infobars(self): """ 启用'禁用浏览器正在被自动化程序控制的提示'启动参数 """ self._experimental_options["excludeSwitches"] = ["enable-automation"] def to_capabilities(self): """ 使用已设置的所有选项创建功能 :return: 返回包含所有内容的字典 """ caps = self._caps edge_options = { "extensions": [], "args": self.arguments } edge_options.update(self.experimental_options) caps[self.KEY] = edge_options return caps对于 _is_infobars、_enable_infobars 方法的作用,这是一个扩展知识,用于启用 启动参数。有兴趣的朋友可以去看看 七、自动化程序控制的提示「扩展」 六、无头浏览器无头浏览器的应用比较重要,无头浏览器 又叫 无界面(无窗口)运行,即在运行程序的时候是不会弹出浏览器窗口,但程序依旧在运行,目前几个主流的浏览器都支持。 无头浏览器的好处: 这样可以大幅度提高效率,节约系统资源开销减少运行误差,防止因误触浏览器窗口而导致的程序出错可以用于远程运行使用无头浏览器: 那么如何使用无头浏览器呢?其实很简单,只需要加上 --headless 启动参数即可,这里利用 五、对启动参数选项进行封装 中所封装的类添加启动参数 # Edge浏览器 options = EdgeOptions() options.add_argument(r"--headless") browser = Edge(executable_path=r"msedgedrive.exe", capabilities=options.to_capabilities()) # ---------------------------------------------------------------- # Chrome浏览器 options = ChromeOptions() options.add_arguments(r"--headless") browser = Chrome(executable_path=r"chromedriver.exe", options=options)GPU加速: 通常来说,使用无头浏览器还会再加一个参数 --disable-gpu,此参数的作用是禁用 gpu 加速。这是配合无头浏览器经常用上的参数,在很多教程中都能见到其身影,可为什么要加上这个参数呢? 默认不加 --disable-gpu 启动参数情况下的占用情况,CPU和内存都是动态不确定的,把目光看向GPU,可以看到其实无头浏览器并没有成功使用到GPU来进行硬件加速 使用无头浏览器并关闭 GPU 加速 options = EdgeOptions() options.add_arguments([r"--headless", r"--disable-gpu"]) browser = Edge(executable_path=r"msedgedrive.exe", capabilities=options.to_capabilities()) # --------------------------------------------------------------------------------------------- # Chrome浏览器 options = ChromeOptions() options.add_arguments([r"--headless", r"--disable-gpu"]) browser = Chrome(executable_path=r"chromedriver.exe", options=options) 七、自动化程序控制的提示「扩展」其实本文在 六、无头浏览器 就已经结束了,此部分是我在做测试时遇到的问题。将此作为一个扩展,在这里将解决方法分享给大家 对于不断更新版本的Chrome浏览器来说,可能会废除一些属性,也有可能睡更新一些属性 --disable-infobars 参数在高版本的浏览器中已经废除,它的作用就是禁用浏览器正在被自动化程序控制的提示,那么还有什么方法可以禁止该提示呢? 源码: 在看解决方法之前,咱先看看想要用到 add_experimental_option 方法的源码,位于 Options 参数选项类中。其实该方法也比较简单,就是给 to_capabilities 所输出的字典添加一个键值对 class Options(object): KEY = "goog:chromeOptions" def __init__(self): self._binary_location = '' self._arguments = [] self._extension_files = [] self._extensions = [] self._experimental_options = {} self._debugger_address = None self._caps = DesiredCapabilities.CHROME.copy() ...... @property def experimental_options(self): """ Returns a dictionary of experimental options for chrome. """ return self._experimental_options def add_experimental_option(self, name, value): """ Adds an experimental option which is passed to chrome. Args: name: The experimental option name. value: The option value. """ self._experimental_options[name] = value ...... def to_capabilities(self): """ Creates a capabilities with all the options that have been set and returns a dictionary with everything """ caps = self._caps chrome_options = self.experimental_options.copy() chrome_options["extensions"] = self.extensions if self.binary_location: chrome_options["binary"] = self.binary_location chrome_options["args"] = self.arguments if self.debugger_address: chrome_options["debuggerAddress"] = self.debugger_address caps[self.KEY] = chrome_options return caps解决方法: 目前的解决方法是通过一个名为 excludeSwitches 选项,然后排除 enable-automation 开关,代码很简单只需要三行即可 options = Options() options.add_experimental_option("excludeSwitches", ["enable-automation"]) browser = webdriver.Chrome(executable_path="chromedriver.exe", options=options)参考文献节选: |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |