据绿润百科网站「我会很洒脱i」消息，近日，请问棘轮机构的设计要点有哪些？棘轮机构的设计要点「干货」引发热议，棘轮机构的设计要点有哪些同样引起许多争议，对此众网友各抒己见。但到底是怎么回事呢？绿润百科为您解答。

棘轮机构的设计主要应考虑：棘轮齿形的选择 、模数齿数的确定 、齿面倾斜角的确定 、行程和动停比的调节方法现以齿式棘轮机构为例，说明其设计方法齿形的选择图示为常用齿形，不对称梯形用于承受载荷较大的场合；当棘轮机构承受的载荷较小时，可采用三角形或圆弧形齿形；矩形和对称梯形用于双向式棘轮机构。模数、齿数的确定与齿轮相同，棘轮轮齿的有关尺寸也用模数作为计算的基本参数，但棘轮的标准模数要按棘轮的顶圆直径来计算。

【英文介绍/For English】：

The design of the ratchet mechanism should mainly consider: the selection of the tooth shape of the ratchet, the determination of the number of modulus teeth, the determination of the inclination angle of the tooth surface, the adjustment method of the stroke and the dynamic stop ratio. Now take the toothed ratchet mechanism as an example to illustrate its design method The selection diagram shows the commonly used tooth shape, the asymmetric trapezoid is used in the occasion of heavy load; when the load of the ratchet mechanism is small, the triangular or arc tooth shape can be used; the rectangle and symmetrical trapezoid are used for the two-way ratchet mechanism . The determination of the modulus and the number of teeth is the same as that of the gear, and the relevant dimensions of the teeth of the ratchet also use the modulus as the basic parameter for calculation, but the standard modulus of the ratchet should be calculated according to the diameter of the top circle of the ratchet.

声明：本站所有文章资源内容，如无特殊说明或标注，均为采集网络资源。如若本站内容侵犯了原著者的合法权益，可联系本站删除。如若转载，请注明出处：https://www.hbgreen.com.cn/news/29543573b.html