华为设备配置Loopback接口 |
您所在的位置：网站首页 › 华为交换机如何给端口配置ip › 华为设备配置Loopback接口 |
华为设备配置Loopback接口
|
华为设备配置Loopback接口 一、思维导图  二、视频 三、配置 1、创建Loopback接口 [R1]interface LoopBack 02、配置IP地址 [R1-LoopBack0]ip address 1.1.1.1 323、作用 1、用于管理地址2、IBGP邻居的建立3、模拟网段4、查看 [R1]display ip interface brief *down: administratively down^down: standby(l): loopback(s): spoofingThe number of interface that is UP in Physical is 3The number of interface that is DOWN in Physical is 2The number of interface that is UP in Protocol is 3The number of interface that is DOWN in Protocol is 2Interface IP Address/Mask Physical Protocol GigabitEthernet0/0/0 10.1.11.1/24 up up GigabitEthernet0/0/1 unassigned down down GigabitEthernet0/0/2 unassigned down down LoopBack0 1.1.1.1/32 up up(s) NULL0 unassigned up up(s) |
【本文地址】
今日新闻 |
推荐新闻 |