设为首页收藏本站
开启辅助访问

华为S2300交换机基本配置

 您所在的位置：网站首页 › 华为交换机s2326如何设置 › 华为S2300交换机基本配置

华为S2300交换机基本配置

2024-04-15 21:38| 来源: 网络整理| 查看: 265

 1. 进入华为S2300交换机配置界面并给交换机命名

sys    //进入system-view视图进行交换机配置 Enter system view, return user view with Ctrl+Z.  [Quidway]sysname Mill2meetingroom-S2300  //设置交换机名字为Mill2meetingroom-S2300（二厂会议室华为S2300） [Mill2meetingroom-S2300]   2. 批量创建VLAN

[Mill2meetingroom-S2300]vlan batch 2 to 21

 Please wait...

 Done.      //添加VLAN 2 到 VLAN 21(VLAN 1为默认VLAN) 

[Mill2meetingroom-S2300-vlan2]   3. 建立端口组并把端口批量加入端口组里，批量修改端口类型（port link-type）

[Mill2meetingroom-S2300]port-group accessmeetingroom  //建立端口组accessmeetingroom

[Mill2meetingroom-S2300-port-group-accessmeetingroom]group-member Ethernet 0/0/1

 to Ethernet 0/0/22   //添加组成员1到22号端口

[Mill2meetingroom-S2300-port-group-accessmeetingroom]port link-type access

//设置改端口组成员为access口

Execute command [port link-type access ] for port [Ethernet0/0/1] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/2] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/3] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/4] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/5] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/6] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/7] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/8] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/9] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/10] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/11] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/12] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/13] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/14] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/15] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/16] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/17] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/18] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/19] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/20] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/21] is finished.

Execute command [port link-type access ] for port [Ethernet0/0/22] is finished.

[Mill2meetingroom-S2300-port-group-accessmeetingroom]quit //设置成功后退出端口组配置

  4. 批量划分端口VLAN [Mill2meetingroom-S2300]vlan 7

[Mill2meetingroom-S2300-vlan7]port ethernet 0/0/1 to 0/0/16  //把1到16号口划分给VLAN 7

[Mill2meetingroom-S2300-vlan7]quit   [Mill2meetingroom-S2300]vlan 6

[Mill2meetingroom-S2300-vlan6]port ethernet 0/0/17 to 0/0/22 //把1到16号口划分给VLAN 6

[Mill2meetingroom-S2300-vlan6]quit 5. 设置trunk口

[Mill2meetingroom-S2300]port-group trunkmeetingroom

[Mill2meetingroom-S2300-port-group-trunkmeetingroom]group-member ethernet 0/0/23

 to ethernet 0/0/24

[Mill2meetingroom-S2300-port-group-trunkmeetingroom]port link-type trunk

  Error: Link-type trunk conflicts with default VLAN attribute on a port.

Execute command [port link-type trunk] for port [Ethernet0/0/23] is finished.

  Error: Link-type trunk conflicts with default VLAN attribute on a port.

Execute command [port link-type trunk] for port [Ethernet0/0/24] is finished.

 

[Mill2meetingroom-S2300-port-group-trunkmeetingroom]port trunk allow-pass vlan a

ll

Execute command [port trunk allow-pass vlan all] for port [Ethernet0/0/23] is fi

nished.

Execute command [port trunk allow-pass vlan all] for port [Ethernet0/0/24] is fi

nished.  

[Mill2meetingroom-S2300-port-group-trunkmeetingroom]negotiation auto

Execute command [negotiation auto] for port [Ethernet0/0/23] is finished.

Execute command [negotiation auto] for port [Ethernet0/0/24] is finished.

  6. 设置交换机管理地址192.168.15.24 [Mill2meetingroom-S2300]int vlanif 1 [Mill2meetingroom-S2300-Vlanif1]shutdown //关闭vlanif 1

Info: Interface Vlanif1 has already been shutdown.

  [Mill2meetingroom-S2300]interface vlanif 15

[Mill2meetingroom-S2300-Vlanif15]ip address 192.168.15.24 255.255.255.0

[Mill2meetingroom-S2300-Vlanif15]undo shutdown Info: Interface Vlanif15 is not shutdown. [Mill2meetingroom-S2300-Vlanif15]quit  

[Mill2meetingroom-S2300]ip route-static 0.0.0.0 0.0.0.0 192.168.15.254 preferenc

e 60  

7. 设置console口

[Mill2meetingroom-S2300]user-interface con 0

[Mill2meetingroom-S2300-ui-console0]idle-timeout 0 0

[Mill2meetingroom-S2300-ui-console0]authentication-mode password

[Mill2meetingroom-S2300-ui-console0]set authentication password cipher dabaicai

[Mill2meetingroom-S2300-ui-console0]quit

 

8. 设置远程登录

[Mill2meetingroom-S2300]user-interface vty 0 4

[Mill2meetingroom-S2300-ui-vty0-4]idle-timeout 0 0

[Mill2meetingroom-S2300-ui-vty0-4]authentication-mode password

[Mill2meetingroom-S2300-ui-vty0-4]set authentication password cipher dabaicai

[Mill2meetingroom-S2300-ui-vty0-4]user privilege level 15

[Mill2meetingroom-S2300-ui-vty0-4]quit

 

9. 查看交换机当前配置

[Mill2meetingroom-S2300]display current-configuration                                   

#

Error:Wrong parameter found

#

 sysname Mill2meetingroom-S2300                        

cluster enable

 ntdp enable

 ntdp hop 16

 ndp enable

 vlan batch 1 to 21                  

#

 bpdu enable     

[2cha #H

 cluster enable-vty0-4]set aut

 ntdp enableassword ciph

 ntdp hop 16           

 ndp enable          

#

 voice-vlan mac-address 0001-e300-0000 mask ffff-ff00-0000 description Siemens p

hone

 voice-vlan mac-address 0003-6b00-0000 mask ffff-ff00-0000 description Cisco pho

ne

 voice-vlan mac-address 0004-0d00-0000 mask ffff-ff00-0000 description Avaya pho

ne

 voice-vlan mac-address 0060-b900-0000 mask ffff-ff00-0000 description Philips/N

EC phone

 voice-vlan mac-address 00d0-1e00-0000 mask ffff-ff00-0000 description Pingtel p

hone

 voice-vlan mac-address 00e0-7500-0000 mask ffff-ff00-0000 description Polycom p

hone

 voice-vlan mac-address 00e0-bb00-0000 mask ffff-ff00-0000 description 3com phon

e #

 undo http server enable

# interface Vlanif1                      shutdown

 ip address dhcp-alloc

# interface Vlanif15

 ip address 192.168.15.24 255.255.255.0

# interface Ethernet0/0/1

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable

# interface Ethernet0/0/2

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable      # interface Ethernet0/0/3

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable # interface Ethernet0/0/4

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable # interface Ethernet0/0/5

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable # interface Ethernet0/0/6

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable # interface Ethernet0/0/7

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable # interface Ethernet0/0/8

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable # interface Ethernet0/0/9

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable # interface Ethernet0/0/10

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable    # interface Ethernet0/0/11

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable    # interface Ethernet0/0/12

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable    # interface Ethernet0/0/13

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable    # interface Ethernet0/0/14

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable    # interface Ethernet0/0/15

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable    # interface Ethernet0/0/16

 port link-type access

 port default vlan 7

 ntdp enable

 ndp enable    # interface Ethernet0/0/17

 port link-type access

 port default vlan 6

 ntdp enable

 ndp enable # interface Ethernet0/0/18

 port link-type access

 port default vlan 6

 ntdp enable

 ndp enable # interface Ethernet0/0/19

 port link-type access

 port default vlan 6

 ntdp enable

 ndp enable # interface Ethernet0/0/20

 port link-type access

 port default vlan 6

 ntdp enable

 ndp enable # interface Ethernet0/0/21

 port link-type access

 port default vlan 6

 ntdp enable

 ndp enable # interface Ethernet0/0/22

 port link-type access

 port default vlan 6

 ntdp enable

 ndp enable # interface Ethernet0/0/23  port default vlan 1

 port trunk allow-pass vlan 1 to 4094

 ntdp enable

 ndp enable # interface Ethernet0/0/24  port default vlan 1

 port trunk allow-pass vlan 1 to 4094

 ntdp enable

 ndp enable # interface GigabitEthernet0/0/1  port default vlan 1

 ntdp enable

 ndp enable # interface GigabitEthernet0/0/2

 port default vlan 1

 ntdp enable

 ndp enable # interface NULL0 aaa

 authentication-scheme default

 authorization-scheme default  accounting-scheme default

 domain default

 domain default_admin

#

 ip route-static 0.0.0.0 0.0.0.0 192.168.15.254

# user-interface con 0  authentication-mode password

 set authentication password cipher EJ



【本文地址】


今日新闻

推荐新闻

    CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3