华为 AP 3010 二层转发设置 |
您所在的位置:网站首页 › 华为ma5676设置上网 › 华为 AP 3010 二层转发设置 |
配置小型网络WLAN基本业务示例 组网需求 如图1所示,FAT AP通过有线方式接入Internet,通过无线方式连接STA终端。现某企业分支机构为了保证工作人员可以随时随地的访问公司网络,需要通过部署WLAN基本业务实现移动办公。 具体要求如下: 提供名为“test”的无线网络。 工作人员分配到的IP地址网段为192.168.11.0/24。 图1 配置小型网络WLAN基本业务组网图 配置思路 采用如下的思路配置小型网络的WLAN基本业务: 配置AP和上层网络设备之间实现二层互通。 在AP上配置基于接口的DHCP服务器为STA分配IP地址。 配置AP的系统参数,包括国家码。 配置VAP,实现STA访问WLAN网络功能。 配置AP对应的WMM模板、射频模板,使用WMM模板和射频模板的默认配置,并在射频模板下绑定WMM模板,实现STA与AP之间的无线通信参数配置。 配置WLAN-BSS接口,实现报文到达AP后能够送至WLAN业务处理模块处理。 配置AP对应的安全模板、流量模板,使用安全模板和流量模板的缺省配置,配置服务集并在服务集下绑定WLAN-BSS接口、安全模板、流量模板,实现STA接入网络安全策略及QoS控制。 配置VAP并下发,实现STA能够通过WLAN网络访问Internet。 操作步骤 配置AP与上层网络设备互通 说明: 根据实际组网情况在AP上行口配置业务VLAN透传,和上行网络设备互通。 # 配置AP上行接口GE0/0/1加入VLAN101。 system-view [Huawei] sysname AP [AP] vlan batch 101 [AP] interface gigabitethernet 0/0/1 [AP-GigabitEthernet0/0/1] port link-type trunk [AP-GigabitEthernet0/0/1] port trunk allow-pass vlan101 [AP-GigabitEthernet0/0/1] quit 配置AP的系统参数 # 配置AP的国家码。 [AP] wlan global country-code cn Warning: Modifythe country code may delete all vap and stations will offline, are you sure to continue?[Y/N]:y 配置WLAN业务参数 # 创建名为“wmm”的WMM模板。 [AP] wlan [AP-wlan-view] wmm-profile name wmm [AP-wlan-wmm-prof-wmm] quit # 创建名为“radio”的射频模板,绑定WMM模板“wmm”。 [AP-wlan-view] radio-profile name radio [AP-wlan-radio-prof-radio] wmm-profile name wmm [AP-wlan-radio-prof-radio] quit [AP-wlan-view] quit # 创建WLAN-BSS接口1。 [AP] interface wlan-bss 1 [AP-Wlan-Bss1] port hybrid pvid vlan 101 [AP-Wlan-Bss1] port hybrid untagged vlan 101 [AP-Wlan-Bss1] quit # 创建名为“security”的安全模板。 [AP] wlan [AC-wlan-view] security-profile name security[AC-wlan-sec-prof-security] security-policy wpa2[AC-wlan-sec-prof-security] wpa2 authentication-method psk pass-phrase cipher 1234567a encryption-method ccmp[AC-wlan-sec-prof-security] quit# 创建名为“traffic”的流量模板。 [AP-wlan-view] traffic-profile name traffic [AP-wlan-traffic-prof-traffic] quit # 创建名为“test”的服务集并绑定WLAN-BSS接口、安全模板和流量模板。 [AP-wlan-view] service-set name test [AP-wlan-service-set-test] ssid test [AP-wlan-service-set-test] wlan-bss 1 [AP-wlan-service-set-test] security-profile namesecurity [AP-wlan-service-set-test] traffic-profile nametraffic [AP-wlan-service-set-test] quit [AP-wlan-view] quit 配置VAP 5. [AP] interfacewlan-radio 0/0/0 6. [AP-Wlan-Radio0/0/0]radio-profile name radio 7. Warning: Modify the Radio type may cause someparameters of Radio resume defaul 8. t value, are yousure to continue?[Y/N]:y 9. [AP-Wlan-Radio0/0/0]service-set name test [AP-Wlan-Radio0/0/0] quit save 验证配置结果 配置完成后,通过displayvap service-set name test命令,可以查看到VAP已创建成功。 [AP] display vap service-set name test All VAPInformation(Total-1): SS:Service-set BP: Bridge-profile ---------------------------------------------------------------------- Radio ID SS ID BP ID WLAN ID BSSID Type 0 1 - 1 DCD2-FC21-5D40 service ---------------------------------------------------------------------- Total: 1 STA搜索到名为“test”的无线网络并正常关联后,在AP上执行display station assoc-info interface wlan-radio0/0/0 service-set 1命令,可以查看到用户已经接入到无线网络“test”中。 [AP] display station assoc-info interfacewlan-radio0/0/0 service-set 1 ------------------------------------------------------------------------------ STA MAC AP-ID RADIO-ID SS-ID SSID ------------------------------------------------------------------------------ 14cf-9208-9abf 0 0 1 test ------------------------------------------------------------------------------ Total stations: 1 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |