H3C 小贝WA5320(云AP)瘦转胖版本操作 |
您所在的位置:网站首页 › 华3ap默认地址 › H3C 小贝WA5320(云AP)瘦转胖版本操作 |
软件版本链接如下
https://www.h3c.com/cn/d_202007/1311683_30005_40.htm 下载用户名:yx800,密码:01230123 升级注意事项1)boot版本升级到版本配套的booware版本文件7.18版本 2)升级完bootware后需要格式化Flash,避免空间不足导致失败 3)对应版本文件需要修改成wa5300-oasis.ipe 4)操作步骤与传统瘦切胖类似,无需切换ap-mode,选择 Update Main Image File 5)云AP是Fat AP。初次使用云AP,给云AP上电后,云AP会默认开启4个无线服务: 其中一个称之为管理WIFI,也称内部WIFI,SSID为H3C_XXXXXX,XXXXXX为设备mac地址后六位。管理WIFI供商铺内部员工管理使用,一般在2.4G频段工作,当设备未连接到绿洲时,通过连接管理WIFI在浏览器输入10.40.94.1或myap.h3c.com访问本地web页面可进行本设备下的无线服务管理配置,一旦连接上绿洲,将只能通过绿洲平台进行统一的无线服务配置管理。 其余3个称为用户WIFI,也称商业WIFI,SSID为H3C_WiFi_1、H3C_WiFi_2、H3C_WiFi_3,不加密,不认证,不隐藏。当设备连接到外网,可为已经连接上用户WIFI的用户提供上网服务。 组网及说明不涉及 升级拓扑
使用3CDaemon作为TFTP协议的传输工具,需要将主机作为tftp服务器,AP作为tftp客户端,使用3cdaemon节省了搭建ftp服务器的时间。 配置步骤1、首先升级扩展boot版本,要求boot版本必须为对应版本配套的7.18版本,版本文件中可获取 启动后Ctrl+B进入bootware,选择7进入bootware操作子菜单 * H3C WA5320 BootWare, Version 7.15 * *Copyright © 2004-2018 New H3C Technologies Co., Ltd. Compiled Date : Aug 21 2018 CPU Type : ARM CPU L1 Cache : 32KB CPU L2 Cache : 256KB CPU Clock Speed : 710MHz Memory Type : DDR3 SDRAM Memory Size : 256MB Memory Speed : 533MHz Flash Size : 32MB PCB Version : Ver.B BootWare Validating… Press Ctrl+B to access EXTENDED-BOOTWARE MENU… Password recovery capability is enabled. Note: The current operating device is flash Enter < Storage Device Operation > to select device. ==================================================== | Boot System | | Enter Serial SubMenu | | Enter Ethernet SubMenu | | File Control | | Restore to Factory Default Configuration | | Skip Current System Configuration | | BootWare Operation Menu | | Skip Authentication for Console Login | | Storage Device Operation | | Reboot | ============================================================================ Ctrl+Z: Access EXTENDED ASSISTANT MENU Ctrl+F: Format File System Ctrl+C: Display Copyright Ctrl+Y: Change AP Mode Enter your choice(0-9): 7 选择4设置更新bootware方式通过网线 =================================================== |Note:the operating device is flash | | Backup Full BootWare | | Restore Full BootWare | | Update BootWare By Serial | | Update BootWare By Ethernet | | Exit To Main Menu | ============================================================================ Enter your choice(0-4): 4 选择4设置上传配置 ====================================== | Update Full BootWare | | Update Extended BootWare | | Update Basic BootWare | | Modify Ethernet Parameter | | Exit To Main Menu | ============================================================================ Enter your choice(0-4): 4 设置上传文件名,此处是更新bootware,需上传boot文件;设置IP地址 ==================================================== |Note: “.” = Clear field. | | “-” = Go to previous field. | | Ctrl+D = Quit. | ============================================================================ Protocol (FTP or TFTP) :tftp Load File Name :wa5300.ipe :apwa5300_v7.18.btwTarget File Name :wa5300.ipe :apwa5300_v7.18.btwServer IP Address :192.168.0.99 10.0.0.233 Local IP Address :192.168.0.98 10.0.0.2 Subnet Mask :255.255.255.0 Gateway IP Address :0.0.0.0 选择1更新bootware ====================================== | Update Full BootWare | | Update Extended BootWare | | Update Basic BootWare | | Modify Ethernet Parameter | | Exit To Main Menu | ============================================================================ Enter your choice(0-4): 1 Loading…Done. 1233920 bytes downloaded! Updating Basic BootWare? [Y/N]Y Updating Basic BootWare…Done. Updating Extended BootWare? [Y/N]Y Updating Extended BootWare…Done. 更新完成后选择0退回主界面并reboot ====================================== | Update Full BootWare | | Update Extended BootWare | | Update Basic BootWare | | Modify Ethernet Parameter | | Exit To Main Menu | ============================================================================ Enter your choice(0-4): 0 =================================================== |Note:the operating device is flash | | Backup Full BootWare | | Restore Full BootWare | | Update BootWare By Serial | | Update BootWare By Ethernet | | Exit To Main Menu | ============================================================================ Enter your choice(0-4): 0 ==================================================== | Boot System | | Enter Serial SubMenu | | Enter Ethernet SubMenu | | File Control | | Restore to Factory Default Configuration | | Skip Current System Configuration | | BootWare Operation Menu | | Skip Authentication for Console Login | | Storage Device Operation | | Reboot | ============================================================================ Ctrl+Z: Access EXTENDED ASSISTANT MENU Ctrl+F: Format File System Ctrl+C: Display Copyright Ctrl+Y: Change AP Mode Enter your choice(0-9): 0 System is starting… Press Ctrl+D to access BASIC-BOOTWARE MENU Booting Normal Extended BootWare The Extended BootWare is self-decompressing… .Done. 重启完成后查看bootwre版本为7.18,再次Ctrl+B进入bootware,Ctrl+F格式化flash,此处注意需要格式化,避免空间不足导致版本解压失败 * H3C WA5320 BootWare, Version 7.18 * *Copyright © 2004-2019 New H3C Technologies Co., Ltd. Compiled Date : Mar 8 2019 CPU Type : ARM CPU L1 Cache : 32KB CPU L2 Cache : 256KB CPU Clock Speed : 710MHz Memory Type : DDR3 SDRAM Memory Size : 256MB Memory Speed : 533MHz Flash Size : 32MB PCB Version : Ver.B BootWare Validating… Press Ctrl+B to access EXTENDED-BOOTWARE MENU… Password recovery capability is enabled. Note: The current operating device is flash Enter < Storage Device Operation > to select device. ==================================================== | Boot System | | Enter Serial SubMenu | | Enter Ethernet SubMenu | | File Control | | Restore to Factory Default Configuration | | Skip Current System Configuration | | BootWare Operation Menu | | Skip Authentication for Console Login | | Storage Device Operation | | Reboot | ============================================================================ Ctrl+Z: Access EXTENDED ASSISTANT MENU Ctrl+F: Format File System Ctrl+C: Display Copyright Ctrl+Y: Change AP Mode Enter your choice(0-9): Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y… … … Format success. 格式化完成后选择3进入ethernet子菜单 ==================================================== | Boot System | | Enter Serial SubMenu | | Enter Ethernet SubMenu | | File Control | | Restore to Factory Default Configuration | | Skip Current System Configuration | | BootWare Operation Menu | | Skip Authentication for Console Login | | Storage Device Operation | | Reboot | ============================================================================ Ctrl+Z: Access EXTENDED ASSISTANT MENU Ctrl+F: Format File System Ctrl+C: Display Copyright Ctrl+Y: Change AP Mode Enter your choice(0-9): 3 选5设置有线网络配置,上传之前需要把胖AP版本文件名改成wa5300-oasis.ipe ==================================================== |Note:the operating device is flash | | Download Image Program To SDRAM And Run | | Update Main Image File | | Update Backup Image File | | Download Files(.) | | Modify Ethernet Parameter | | Exit To Main Menu | | | ============================================================================ Enter your choice(0-5): 5 ==================================================== |Note: “.” = Clear field. | | “-” = Go to previous field. | | Ctrl+D = Quit. | ============================================================================ Protocol (FTP or TFTP) :tftp Load File Name :apwa5300_v7.18.btw :wa5300-oasis.ipeTarget File Name :apwa5300_v7.18.btw :wa5300-oasis.ipeServer IP Address :10.0.0.233 Local IP Address :10.0.0.2 Subnet Mask :255.255.255.0 Gateway IP Address :0.0.0.0 配置完成后选择2,更新主版本文件 ==================================================== |Note:the operating device is flash | | Download Image Program To SDRAM And Run | | Update Main Image File | | Update Backup Image File | | Download Files(.) | | Modify Ethernet Parameter | | Exit To Main Menu | | | ============================================================================ Enter your choice(0-5): 2 Loading… … … … … … … …Done. 27445248 bytes downloaded! Image file wa5300-oasis-boot.bin is self-decompressing… Saving file flash:/wa5300-oasis-boot.bin … …Done. Image file wa5300-oasis-system.bin is self-decompressing… Saving file flash:/wa5300-oasis-system.bin … … … … … …Done. 升级完成后选择0退回主界面并且reboot ==================================================== |Note:the operating device is flash | | Download Image Program To SDRAM And Run | | Update Main Image File | | Update Backup Image File | | Download Files(.) | | Modify Ethernet Parameter | | Exit To Main Menu | | | ============================================================================ Enter your choice(0-5): 0 ==================================================== | Boot System | | Enter Serial SubMenu | | Enter Ethernet SubMenu | | File Control | | Restore to Factory Default Configuration | | Skip Current System Configuration | | BootWare Operation Menu | | Skip Authentication for Console Login | | Storage Device Operation | | Reboot | ============================================================================ Ctrl+Z: Access EXTENDED ASSISTANT MENU Ctrl+F: Format File System Ctrl+C: Display Copyright Ctrl+Y: Change AP Mode Enter your choice(0-9): 0 System is starting… Press Ctrl+D to access BASIC-BOOTWARE MENU Booting Normal Extended BootWare The Extended BootWare is self-decompressing… .Done. * H3C WA5320 BootWare, Version 7.18 * *Copyright © 2004-2019 New H3C Technologies Co., Ltd. Compiled Date : Mar 8 2019 CPU Type : ARM CPU L1 Cache : 32KB CPU L2 Cache : 256KB CPU Clock Speed : 710MHz Memory Type : DDR3 SDRAM Memory Size : 256MB Memory Speed : 533MHz Flash Size : 32MB PCB Version : Ver.B BootWare Validating… Press Ctrl+B to access EXTENDED-BOOTWARE MENU… Loading the main image files… Loading file flash:/wa5300-oasis-system.bin… … … Done. Loading file flash:/wa5300-oasis-boot.bin… Done. Image file flash:/wa5300-oasis-boot.bin is self-decompressing… … … … … …Done. System image is starting… Startup configuration file doesn"t exist or is invalid. Line con0 is available. Press ENTER to get started. 至此设备启动完成 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |