PostMessage 向Windows窗口发送Alt组合键

出处：http://blog.sina.com.cn/s/blog_4ba5666e0101c2as.html

关于向Windows窗口发送Alt组合键的问题,这个真是经典问题啊,在网上找了一下,问的人N多,方法差不多, 但就是没有很好解决问题。 之前找到一个能正确发送的code:(Alt+A) PostMessage(hWnd,WM_SYSKEYDOWN,VK_MENU,0); PostMessage(hWnd,WM_SYSKEYDOWN,0x41,0); Sleep(50); PostMessage(hWnd,WM_SYSKEYUP,0x41,0); PostMessage(hWnd,WM_SYSKEYUP,VK_MENU,0); 有人解释说，按下组合键的时候系统是发两条消息的 但是看到Win32 SDK,感觉上就发一次就可以了…… 偶然间又看到最后一个参数的说明，有所发现！先看WM_SYSKEYDOWN的help The WM_SYSKEYDOWN message is posted to the window with the keyboard focus when the user holds down the ALT key and then presses another key. It also occurs when no window currently has the keyboard focus; in this case, the WM_SYSKEYDOWN message is sent to the active window. The window that receives the message can distinguish between these two contexts by checking the context code in the lKeyData parameter. WM_SYSKEYDOWN nVirtKey = (int) wParam; // virtual-key code lKeyData = lParam;       // key data Parameters nVirtKey Value of wParam. Specifies the virtual-key code of the key being pressed. lKeyData Value of lParam. Specifies the repeat count, scan code, extended-key flag, context code, previous key-state flag, and transition-state flag, as shown in the following table: Value Description 0-15 Specifies the repeat count. The value is the number of times the keystroke is repeated as a result of the user holding down the key. 16-23 Specifies the scan code. The value depends on the original equipment manufacturer (OEM). 24 Specifies whether the key is an extended key, such as the right-hand ALT and CTRL keys that appear on an enhanced 101- or 102-key keyboard. The value is 1 if it is an extended key; otherwise, it is 0. 25-28 Reserved; do not use. 29 Specifies the context code. The value is 1 if the ALT key is down while the key is pressed; it is 0 if the WM_SYSKEYDOWN message is posted to the active window because no window has the keyboard focus. 30 Specifies the previous key state. The value is 1 if the key is down before the message is sent, or it is 0 if the key is up. 31 Specifies the transition state. The value is always 0 for a WM_SYSKEYDOWN message. 之前曾经修改过keyData的16－23位为VK_MENU，第30位参数为1,但没效果 请看位29的说明！！ The value is 1 if the ALT key is down while the key is pressed; 当值为1时表示ALT键被按下！这不正是我需要的吗？于是把29位设置为1,函数调用变成 PostMessage(hWnd,WM_SYSKEYDOWN,0x41,1