Print

您所在的位置：网站首页 › wf1000xm4连接headphone › Print

Print

2023-07-28 03:53| 来源: 网络整理| 查看: 265

Follow these steps to troubleshoot why the WF-1000XM4 earbud headphones don't charge:

Select the way you charge.

I use the wireless charging pad

Go to step 2.I use the supplied USB Type-C™ cable

Go to step 6. Note: Use the USB Type-C cable that is supplied with the headphones. Charging may not be possible with a commercially-available cable.

Place the charging case on the wireless charging pad properly.

Close the lid and place the charging case on the wireless charging pad with the SONY logo facing upward.

Note: If the charging case becomes misaligned with the wireless charging pad, charging may slow down or stop. For details on how to properly set the charging case on the charging pad, refer to the charging pad manual.

The issue is resolvedThe issue may have been caused by the position of the charging case or wireless charging pad.The issue is not resolvedGo to step 3.

Place the charging case on the wireless charging pad, and check the indicator light on the charging case.

The indicator repeatedly flashes twice in red when the headphones are stored in the charging case

Go to step 4.The indicator shows other statusGo to step 5.

Take the charging case to a room with ambient temperature between 59 °F - 95 °F (15 °C and 35 °C), and charge it again.

The issue is resolvedThe issue was caused by the ambient temperature being too high or too low.The issue is not resolvedGo to step 11.

Use the supplied USB cable to connect the charging case to a USB AC adapter or computer, and check if the case is charging.

The case is chargingIf you use the wireless charging pad, remove anything attached to the charging case, such as covers. If the issue is still not resolved, the cause may have been the wireless charging pad. Consult the manufacturer of the wireless charging pad.The case is not chargingGo to step 6.

Clean the charging port of the headphones, and check the indicator status on the charging case.

Clean the headphones and charging ports, set the headphones into the charging case, and check the indicator on the charging case.

Note: When cleaning, do not use compressed air to remove dust as this can cause dust to get into the microphone or sound outlet holes, leading to malfunction. The indicator lights up in green for about three seconds when the headphones are stored in the charging case

The headphones are fully charged. Wear the headphones, establish a Bluetooth® connection to the device, and check if you can hear sound from the connected device. If you can't hear sound, refer to the There is no sound, or sound is only heard from one side of the headphones article.The indicator lights up in green for about six seconds when the lid is opened or closed

The headphones are fully charged. Wear the headphones, establish a Bluetooth® connection to the device, and check if you can hear sound from the connected device. If you can't hear, refer to the There is no sound, or sound is only heard from one side of the headphones article.The indicator lights up in orange for about three seconds when the headphones are stored in the charging case

Go to step 7.The indicator lights up in orange for about six seconds when the lid is opened or closed

Go to step 7.The indicator doesn't light up when the headphones are stored in the charging case

Go to step 8.The indicator flashes in red when the lid is opened or closed

Go to step 8.

Set the headphones into the charging case, connect the charging case using the supplied USB Type-C cable, and check if the case is charging.

Note: Clean the charging port before charging. The case is chargingThe charging port on the charging case may have been dirty. Note: Regular cleaning is recommended to prevent issues with charging. The case is not chargingGo to step 11.

Set the headphones into the charging case, connect the charging case using the supplied USB Type-C cable, and check the indicator status on the charging case again.

The indicator lights up in orange for more than one minute when the headphones are stored in the charging case

The remaining battery level may be low. Charge the headphones for more than 30 minutes.The indicator repeatedly flashes twice (or three times) when the headphones are stored in the charging case

Go to step 12.The indicator flashes slowly when the headphones are stored in the charging case

Go to step 11.The indicator does not light when the headphones are stored in the charging case

Go to step 9.

Check if you can charge a different device with the same AC adapter or USB port. Use the same AC adapter or the USB port on the computer to charge a different mobile device or product.

The mobile device or product is chargingGo to step 10.The mobile device or product is not chargingThe AC adapter or USB port may not be working. Contact the manufacturer.

Clean the charging port on the charging case, and charge the case again.

If any dust or dirt is in or around the charging port, it may not charge properly. Remove the dust or dirt with soft, dry cloth before charging.

The charging can be completedThe charging port of the charging case may have been dirty. Note: Regular cleaning is recommended to prevent issues with charging. The charging cannot be completedThe headphones may be malfunctioning and may require repair. Go to Product Repair.

Reset the headphones.

Visit the Help Guide or watch this video for instructions:

The issue is resolvedThe issue was caused by a temporary malfunction of the headphones.The issue is not resolvedGo to the next troubleshooting step.

Initialize the headphones.

Note: After initialization, the headphones will return to the factory settings and all Bluetooth pairing information will be deleted.

Visit the Help Guide or watch this video for instructions:

The issue is resolvedThe issue was caused by a temporary malfunction of the headphones.The issue is not resolvedThe headphones may be malfunctioning and may require repair. Go to Product Repair.

Go to the Headphones Troubleshooting Guide

【本文地址】

Print

Print

今日新闻

推荐新闻