esxi 磁盘挂载 esxi怎么挂载smb存储 |
您所在的位置：网站首页 › vmware挂载vmfs存储 › esxi 磁盘挂载 esxi怎么挂载smb存储 |
esxi 磁盘挂载 esxi怎么挂载smb存储
|
概述 SmartX 的分布式块存储 ZBS 可以与 VMware 虚拟化在同一节点上以超融合方式部署。
原理： 使用该种架构时，SMTX OS 运行在 ESXi 上的虚拟机内，称为 SCVM计算虚拟化服务则由 VMware ESXi 提供ESXi 通过将 RAID 卡（HBA/JBOD 模式）直通给 SCVM，服务器上的所有硬盘将被 SCVM 接管并提供分布式块存储服务实验环境使用的软件： SMTXOS-5.0.2-el7-2201071258-x86_64 — SCVM VMware-VMvisor-Installer-7.0U3c-19193900.x86_64 — ESXi SMX-ZBSNasPlugin_2.1-2 — ESXi NFS driver 硬件： 配件名称 配件型号 固件版本 CPU Intel® Xeon® Gold 6234 CPU @ 3.30GHz(*1),Intel® Xeon® Silver 4210R CPU @ 2.40GHz(*2) N/A MEM 128 GB*3 N/A Raid卡 Dell HBA330 Mini 16.17.00.05 SSD INTEL:SSDSC2KG960G8R N/A HDD TOSHIBA:AL15SEB24EQY N/A 节点 IPMI Kernel-ESXi管理(vmk0) Kernel-Storage/vMotion(vmk1) Kernel-NFS(vmk2) esx-01 192.168.87.201/20 192.168.87.211/20 10.10.87.211/24 192.168.33.1/24 esx-02 192.168.87.202/20 192.168.87.212/20 10.10.87.212/24 192.168.33.1/24 esx-03 192.168.87.203/20 192.168.87.213/20 10.10.87.213/24 192.168.33.1/24 VM SMTX管理 Storage SMTX NFS SCVM-01 192.168.87.216/20 10.10.87.216/24 192.168.33.2/24 SCVM-02 192.168.87.217/20 10.10.87.217/24 192.168.33.2/24 SCVM-03 192.168.87.218/20 10.10.87.218/24 192.168.33.2/24 实验逻辑图逻辑架构
在某一台ESXi上安装vCenter，过程 略 修改ESXi直通模式在每一个 ESXi 上运行如下命令：esxcfg-advcfg -s 30 /NFS/HeartbeatTimeout esxcfg-advcfg -s 64 /NFS/MaxVolumes esxcfg-advcfg -s 0 /Misc/APDHandlingEnable esxcfg-advcfg -s 32 /Net/TcpipHeapSize esxcfg-advcfg -s 1536 /Net/TcpipHeapMax esxcfg-advcfg -s 1 /UserVars/SuppressShellWarning查看磁盘控制器编号，在每台 ESXi 主机上执行[root@esx-01:~] lspci -v |grep "HBA" -A 1 -B 1 0000:3b:00.0 Mass storage controller Serial Attached SCSI controller: Avago (LSI Logic) Dell HBA330 Mini [vmhba2] Class 0107: 1000:0097将上述编号添加到 /etc/vmware/passthru.map中#Avago (LSI Logic) Dell HBA330 Mini [vmhba2] 1000 0097 d3d0 false使用 ESXi Web 连接到 ESXi。选择:配置-> 硬件-> PCI 设备-> 编辑-> （筛选HBA）勾选相应的HBA设备，选择更换直通，系统会提醒失败，重新引导。重启以后，直通模式已经改成功安装NFS插件使用 VMware ESXi 7.0 U2 以及后续的版本，直接安装或升级至 2.1-2 版本检查当前 ESXi 主机是否已安装 VAAI-NAS 插件esxcli software vib list | grep -i zbs安装插件[root@esx-01:~] /etc/init.d/vaai-nasd stop vaai-nasd is not running [root@esx-01:~] ls / SMX-ZBSNasPlugin_2.1-2.zip etc opt tardisks.noauto altbootbank include proc tmp bin lib productLocker usr bootbank lib64 sbin var bootpart.gz local.tgz scratch vmfs bootpart4kn.gz local.tgz.ve store vmimages dev locker tardisks [root@esx-01:~] esxcli software component apply -d /SMX-ZBSNasPlugin_2.1-2.zip Installation Result Components Installed: SMX-ZBSNasPlugin_1.0-0.0.0006 Components Removed: Components Skipped: Message: Operation finished successfully. Reboot Required: false启动插件[root@esx-01:~] /etc/init.d/vaai-nasd start vaai-nasd started查看插件运行情况，并核对版本信息[root@esx-01:~] esxcli software vib list | grep -i zbs SMX-ESX-ZBSNasPlugin 2.1-2 SMX VMwareAccepted 2022-04-27配置ESXi网络正如前面ESXi拓扑所示，我们需要在每个ESXi配置单个标准交换机来提供网络服务，其中管理用交换机延用vswitch0。 使用命令行配置交换机并用页面查看生产环境尽量使用冗余上联链路创建标准交换机#创建标准交换机 esxcli network vswitch standard add --vswitch-name=vSS-NFS esxcli network vswitch standard add --vswitch-name=vSS-ZBS #创建vmkernel 设置ip地址 esxcli network vswitch standard portgroup add --portgroup-name=NFS_VMkernel --vswitch-name=vSS-NFS esxcli network ip interface add --interface-name=vmk1 --portgroup-name=NFS_VMkernel esxcli network ip interface ipv4 set --interface-name=vmk1 --ipv4=192.168.33.1 --netmask=255.255.255.0 --type=static esxcli network vswitch standard portgroup add --portgroup-name=ZBS_VMkernel --vswitch-name=vSS-ZBS esxcli network ip interface add --interface-name=vmk2 --portgroup-name=ZBS_VMkernel esxcli network ip interface ipv4 set --interface-name=vmk2 --ipv4=10.10.87.211 --netmask=255.255.255.0 --type=static #按照ESXi修改地址 #添加上行链路（万兆vmnic） esxcli network vswitch standard uplink add --uplink-name=vmnic2 --vswitch-name=vSS-ZBS #创建SCVM端口组 esxcli network vswitch standard portgroup add --portgroup-name=NFS --vswitch-name=vSS-NFS esxcli network vswitch standard portgroup add --portgroup-name=ZBS --vswitch-name=vSS-ZBS #在vmk2上打开vMotion功能 vim-cmd hostsvc/vmotion/vnic_set vmk2查看结果在 ESXi 节点上创建 SCVM 虚拟机在集群的每个节点上安装并配置 ESXi 完毕后，需要在每个节点上创建一个虚拟机 SCVM 用于安装 SMTX OS 。 资源名称 资源需求 备注 vCPU 6 若需开启 RDMA，则建议分配 7 * vCPU 内存 18 GB 若开启 RDMA，则最少需要 18 GB 内存和 3 GB 大页内存 硬盘 最少1 GB 安装位置: SATA DOM 网络 管理网络、存储网络、NFS 网络 磁盘 控制器直通模式 Guest OS选择Linux CentOS 7CPU预留为主频*6，我们使用的CPU： Intel® Xeon® Gold 6234 CPU @ 3.30GHz(*1) Intel® Xeon® Silver 4210R CPU @ 2.40GHz(*2) 所以预留的CPU为 19752/14364 （系统会提示）RAM：18G全部预留，在选择PCI设备–直通HBA卡的时候系统会自动预留（仅vCenter web client）三块网卡选择不同的子网Iso选择SMTXOS-5.0.2-el7-2201071258-x86_64，需上传SCSI控制器类型选择：LSI Logic 并行启动SCVM后，选择 Automatic Installation，系统将自动完成安装SMTX OS
小结SCVM配置 生成VM时配置：修改VM配置：几点注意事项： 先不设置敏感度高和cpu预留，vm基本配置第一步设置好，生成vm改敏感度高，系统会提示cpu预留值改cpu预留值硬盘需要精简模式选择pci直通时，系统会自动保留全部内存（仅vCenter web client）配置ZBS Cluster选择任意SCVM IP地址，https://IP如果没有DHCP，使用CentOS命令配置IP地址如果打不开，登录SCVM确认nginx和zbs-deploy-server服务是否开启；如果没打开用systemctl重启服务systemctl status nginx systemctl status zbs-deploy-server输入Cluster名称并选择vSphere
至此，vSphere上面的NFS DataStore已经建成，可以使用了。 为SMTX OS 配置高可用配置 SCVM 在 ESXi 开机时自动启动在vCenter上选择ESXi为每台SCVM配置开关机自动启动/关闭
这是由于APD参数导致，修改参数后再启动HA 编辑所有ESXi的高级系统配置将Misc.APDHandlingEnable 参数的值修改为 1 启动HA，注意在vCenter上禁用Datastore的相关HA开启 vSphere HA 选项后，将每个 ESXi 主机的 Misc.APDHandlingEnable 参数的值重新设置为0配置IO Reroute在 SMTX OS 集群部署完并正常运⾏后，我们可以看到ZBS 提供的NFS存储的访问地址为192.168.33.2。 正常情况下，其为挂载与vSS 上的自连子网；但是在NFS 交换机、VM网卡或网络发生故障时，NFS存储将不能访问。 为了保证 SMTX OS 的⾼可⽤性，考虑到在ZBS环境，网络上还有一份副本，可以配置IO重路由得到第二路由，在发生本地不可访问的时候，依然有副本可以使用。 IO 重路由是指在本地 SCVM 失效的情况下，将业务虚拟机的 IO 流量重新路由到远程的 SCVM 进⾏恢复，确保业务的⾼可⽤性。 正常使⽤ IO 重路由功能，需要在 vSphere Center 中继续完成 ESXi 主机的部分参数配置，并在 SCVM 中部署 IO 重路由脚本。 配置ESXi主机和SCVM之间双向SSH SCVM对SSH无禁止，整理只需要配置ESXi主机的SSH。 在安装ESXi的时候，我们已经启用了SSH，我们还需要再vCenter上配置ESXi的防火墙，放行SSH流量编辑： 注意：此处不要选择简体中文界面（vCenter 7.0 U3c），会出现看不到选项的情况。繁体中文没这个问题。 登录到任意SCVM，运行以下命令[root@scvm-211 18:13:55 ~]$zbs-deploy-manage deploy-hypervisor --gen_ssh_key 2022-04-27 18:15:53,266 INFO deploy_hypervisor: Collect node info 2022-04-27 18:15:54,838 INFO get_si: create new service instance for host: 192.168.87.211, no exist session 2022-04-27 18:15:54,838 INFO _create_new_si: create new service instance for host: 192.168.87.211 2022-04-27 18:15:57,136 INFO deploy_hypervisor: Start deploy hypervisor 2022-04-27 18:15:57,151 INFO deploy_hypervisor: hypervisor platform: vmware 2022-04-27 18:15:57,152 INFO deploy_vmware: create key pairs for cluster 2022-04-27 18:15:57,840 INFO remote_ssh: command: ssh [email protected] "esxcli vm process list | grep -A 4 '56 4d 40 c9 31 5a ac 51-1e 98 5a 84 e5 48 a9 8c' | grep 'Config File' | awk -F"volumes" '{print $2}' | awk -F '/' '{print $2}'" 2022-04-27 18:15:58,780 INFO get_current_esxi_account: datastore path in esxi 192.168.87.211 : /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872 2022-04-27 18:15:58,781 INFO deploy_vmware_configuration: add reroute public key to authorized_keys of current scvm 2022-04-27 18:15:58,787 INFO deploy_vmware_configuration: generate scripts esxi need 2022-04-27 18:15:58,814 INFO deploy_vmware_configuration: scp scripts to esxi 192.168.87.211 2022-04-27 18:15:58,814 INFO remote_scp: scp command: scp -r /usr/share/tuna/script/vmware_scvm_failure [email protected]:/vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure 2022-04-27 18:15:59,197 INFO remote_scp: local.sh 0% 0 0.0KB/s --:local.sh 100% 217 216.9KB/s 00:00 timeout.sh 0% 0 0.0KB/s --:timeout.sh 100% 885 834.1KB/s 00:00 change_route.sh 0% 0 0.0KB/s --:change_route.sh 100% 8851 4.4MB/s 00:00 scvm_failure_loop.sh 0% 0 0.0KB/s --:scvm_failure_loop.sh 100% 21KB 9.7MB/s 00:00 2022-04-27 18:15:59,298 INFO deploy_vmware_configuration: collect cluster ips 2022-04-27 18:15:59,318 INFO deploy_vmware_configuration: write cluster ips to esxi 192.168.87.211 2022-04-27 18:15:59,318 INFO remote_ssh: command: ssh [email protected] "printf 'local_scvm_data_ip=10.10.87.216 active_scvm_data_ip=10.10.87.216,10.10.87.218,10.10.87.217 local_scvm_manage_ip=192.168.87.216 active_scvm_manage_ip=192.168.87.216,192.168.87.218,192.168.87.217 local_scvm_nfs_ip=192.168.33.2 ' > /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/scvm_ip" 2022-04-27 18:15:59,749 INFO deploy_vmware_configuration: config crontab job of esxi 192.168.87.211 2022-04-27 18:15:59,749 INFO remote_ssh: command: ssh [email protected] "cat /var/run/crond.pid | xargs /bin/kill; sed -i '/scvm_failure_loop.sh/d' /var/spool/cron/crontabs/root; echo '* * * * * /bin/sh /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/scvm_failure_loop.sh &' >> /var/spool/cron/crontabs/root; crond" 2022-04-27 18:16:00,194 INFO deploy_vmware_configuration: clear exist running scvm_failure_loop script 2022-04-27 18:16:00,195 INFO remote_ssh: command: ssh [email protected] "ps -c| grep scvm_failure_loop.sh | grep -v grep | grep -v vi | awk '{print $1}' | xargs /bin/kill" 2022-04-27 18:16:00,673 INFO deploy_vmware_configuration: config rc.local of esxi 192.168.87.211 2022-04-27 18:16:00,673 INFO remote_scp: scp command: scp -r /tmp/boot_reroute.sh [email protected]:/etc/rc.local.d/ 2022-04-27 18:16:01,035 INFO remote_scp: boot_reroute.sh 100% 271 1.3MB/s 00:00 2022-04-27 18:16:01,136 INFO deploy_vmware_configuration: dispatch reroute_key pair to esxi 192.168.87.211 2022-04-27 18:16:01,136 INFO remote_ssh: command: ssh [email protected] "([ -d /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/.smartx_key ] || ([ ! -d /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/.smartx_key ] && mkdir -p /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/.smartx_key))" 2022-04-27 18:16:01,590 INFO remote_scp: scp command: scp -r /root/.ssh/smartx_reroute_id_rsa /root/.ssh/smartx_reroute_id_rsa.pub [email protected]:/vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/.smartx_key 2022-04-27 18:16:01,948 INFO remote_scp: smartx_reroute_id_rsa 100% 2602 2.9MB/s 00:00 smartx_reroute_id_rsa.pub 100% 567 680.8KB/s 00:00 2022-04-27 18:16:02,049 INFO deploy_hypervisor: Finish deploy hypervisor在其他SCVM上运行[root@scvm-212 18:18:17 ~]$zbs-deploy-manage deploy-hypervisor 2022-04-27 18:18:23,157 INFO deploy_hypervisor: Collect node info 2022-04-27 18:18:24,808 INFO get_si: create new service instance for host: 192.168.87.212, no exist session 2022-04-27 18:18:24,808 INFO _create_new_si: create new service instance for host: 192.168.87.212 2022-04-27 18:18:31,388 INFO deploy_hypervisor: Start deploy hypervisor 2022-04-27 18:18:31,402 INFO deploy_hypervisor: hypervisor platform: vmware 2022-04-27 18:18:31,596 INFO remote_ssh: command: ssh [email protected] "esxcli vm process list | grep -A 4 '42 08 8e 3b 49 aa 1a 6d-e7 42 ff 28 de 5b 6b 5c' | grep 'Config File' | awk -F"volumes" '{print $2}' | awk -F '/' '{print $2}'" 2022-04-27 18:18:32,537 INFO remote_ssh: command: ssh [email protected] "[ -f /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/.smartx_key/smartx_reroute_id_rsa.pub ] && [ -f /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/.smartx_key/smartx_reroute_id_rsa ] && echo -n 1" 2022-04-27 18:18:32,983 INFO remote_ssh: command: ssh [email protected] "esxcli vm process list | grep -A 4 '56 4d 40 c9 31 5a ac 51-1e 98 5a 84 e5 48 a9 8c' | grep 'Config File' | awk -F"volumes" '{print $2}' | awk -F '/' '{print $2}'" 2022-04-27 18:18:33,927 INFO remote_ssh: command: ssh [email protected] "[ -f /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/.smartx_key/smartx_reroute_id_rsa.pub ] && [ -f /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/.smartx_key/smartx_reroute_id_rsa ] && echo -n 1" 2022-04-27 18:18:34,361 INFO deploy_vmware: scp reroute key pair from esxi 192.168.87.211 to local 2022-04-27 18:18:34,362 INFO remote_scp: scp command: scp -r [email protected]:/vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/.smartx_key/smartx_reroute_id_rsa* /root/.ssh/ 2022-04-27 18:18:34,729 INFO remote_scp: smartx_reroute_id_rsa 100% 2602 6.5MB/s 00:00 smartx_reroute_id_rsa.pub 100% 567 1.3MB/s 00:00 2022-04-27 18:18:34,919 INFO remote_ssh: command: ssh [email protected] "esxcli vm process list | grep -A 4 '42 08 8e 3b 49 aa 1a 6d-e7 42 ff 28 de 5b 6b 5c' | grep 'Config File' | awk -F"volumes" '{print $2}' | awk -F '/' '{print $2}'" 2022-04-27 18:18:35,794 INFO get_current_esxi_account: datastore path in esxi 192.168.87.212 : /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934 2022-04-27 18:18:35,795 INFO deploy_vmware_configuration: add reroute public key to authorized_keys of current scvm 2022-04-27 18:18:35,800 INFO deploy_vmware_configuration: generate scripts esxi need 2022-04-27 18:18:35,826 INFO deploy_vmware_configuration: scp scripts to esxi 192.168.87.212 2022-04-27 18:18:35,826 INFO remote_scp: scp command: scp -r /usr/share/tuna/script/vmware_scvm_failure [email protected]:/vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure 2022-04-27 18:18:36,214 INFO remote_scp: timeout.sh 100% 885 953.4KB/s 00:00 scvm_failure_loop.sh 100% 21KB 7.9MB/s 00:00 change_route.sh 100% 8851 2.1MB/s 00:00 local.sh 100% 217 234.6KB/s 00:00 2022-04-27 18:18:36,314 INFO deploy_vmware_configuration: collect cluster ips 2022-04-27 18:18:36,331 INFO deploy_vmware_configuration: write cluster ips to esxi 192.168.87.212 2022-04-27 18:18:36,332 INFO remote_ssh: command: ssh [email protected] "printf 'local_scvm_data_ip=10.10.87.217 active_scvm_data_ip=10.10.87.216,10.10.87.218,10.10.87.217 local_scvm_manage_ip=192.168.87.217 active_scvm_manage_ip=192.168.87.216,192.168.87.218,192.168.87.217 local_scvm_nfs_ip=192.168.33.2 ' > /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/scvm_ip" 2022-04-27 18:18:36,770 INFO deploy_vmware_configuration: config crontab job of esxi 192.168.87.212 2022-04-27 18:18:36,771 INFO remote_ssh: command: ssh [email protected] "cat /var/run/crond.pid | xargs /bin/kill; sed -i '/scvm_failure_loop.sh/d' /var/spool/cron/crontabs/root; echo '* * * * * /bin/sh /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/scvm_failure_loop.sh &' >> /var/spool/cron/crontabs/root; crond" 2022-04-27 18:18:37,221 INFO deploy_vmware_configuration: clear exist running scvm_failure_loop script 2022-04-27 18:18:37,222 INFO remote_ssh: command: ssh [email protected] "ps -c| grep scvm_failure_loop.sh | grep -v grep | grep -v vi | awk '{print $1}' | xargs /bin/kill" 2022-04-27 18:18:37,690 INFO deploy_vmware_configuration: config rc.local of esxi 192.168.87.212 2022-04-27 18:18:37,690 INFO remote_scp: scp command: scp -r /tmp/boot_reroute.sh [email protected]:/etc/rc.local.d/ 2022-04-27 18:18:38,040 INFO remote_scp: boot_reroute.sh 100% 271 1.3MB/s 00:00 2022-04-27 18:18:38,140 INFO deploy_vmware_configuration: dispatch reroute_key pair to esxi 192.168.87.212 2022-04-27 18:18:38,140 INFO remote_ssh: command: ssh [email protected] "([ -d /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/.smartx_key ] || ([ ! -d /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/.smartx_key ] && mkdir -p /vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/.smartx_key))" 2022-04-27 18:18:38,584 INFO remote_scp: scp command: scp -r /root/.ssh/smartx_reroute_id_rsa /root/.ssh/smartx_reroute_id_rsa.pub [email protected]:/vmfs/volumes/6268a5c2-9fd4be4e-20b0-54bf64f90934/vmware_scvm_failure/.smartx_key 2022-04-27 18:18:38,938 INFO remote_scp: smartx_reroute_id_rsa 100% 2602 2.8MB/s 00:00 smartx_reroute_id_rsa.pub 100% 567 766.2KB/s 00:00 2022-04-27 18:18:39,039 INFO deploy_hypervisor: Finish deploy hypervisor检查配置是否成功在所有 ESXi 节点上执⾏命令：ps -c | grep scvm_failure | grep -v grep，界⾯显⽰有相关脚本在后台运⾏，如下[root@esx-01:~] ps -c | grep scvm_failure | grep -v grep 2106418 2106418 sh /bin/sh /vmfs/volumes/6268a4b5-ed2ade8a-b645-54bf64f90872/vmware_scvm_failure/scvm_failure_loop.sh在所有 ESXi 节点上执⾏命令：tail -f /var/log/scvm_failure.log。检查所有的scvm_failure 日志。如果⽇志在持续输出，则该步骤测试为通过[root@esx-01:~] tail -f /var/log/scvm_failure.log Wed Apr 27 10:24:22 UTC 2022 [+] start a round Wed Apr 27 10:24:22 UTC 2022 [+] update session list: new_local_zone_data_ips: 10.10.87.216,10.10.87.218,10.10.87.217 new_remote_zone_data_ips: empty new_local_zone_manage_ips = 192.168.87.216,192.168.87.218,192.168.87.217 new_remote_zone_manage_ips: empty Wed Apr 27 10:24:22 UTC 2022 [+] ------------------------------------------------ Wed Apr 27 10:24:25 UTC 2022 [+] start a round Wed Apr 27 10:24:25 UTC 2022 [+] update session list: new_local_zone_data_ips: 10.10.87.216,10.10.87.218,10.10.87.217 new_remote_zone_data_ips: empty new_local_zone_manage_ips = 192.168.87.216,192.168.87.218,192.168.87.217 new_remote_zone_manage_ips: empty Wed Apr 27 10:24:25 UTC 2022 [+] ------------------------------------------------ Wed Apr 27 10:24:28 UTC 2022 [+] start a round Wed Apr 27 10:24:28 UTC 2022 [+] update session list: new_local_zone_data_ips: 10.10.87.216,10.10.87.218,10.10.87.217 new_remote_zone_data_ips: empty new_local_zone_manage_ips = 192.168.87.216,192.168.87.218,192.168.87.217 new_remote_zone_manage_ips: empty Wed Apr 27 10:24:28 UTC 2022 [+] ------------------------------------------------在 ESXi节点上运⾏命令：esxcfg-route -l。显⽰ 192.168.33.2 被路由重定向到本地 SCVM 的存储⽹络地址，则该步骤测试为通过[root@esx-01:~] esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 192.168.33.2 255.255.255.255 10.10.87.216 vmk2 10.10.87.0 255.255.255.0 Local Subnet vmk2 192.168.33.0 255.255.255.0 Local Subnet vmk1 192.168.80.0 255.255.240.0 Local Subnet vmk0 default 0.0.0.0 192.168.80.1 vmk0多了一条路由：192.168.33.2/32指向vmk2，即SCVM的存储网络端口而192.168.33.0/24为直连路由，指向vmk1，优先级高当vmk1不可用时，192.168.33.2/32路由重定向到vmk2配置完成。
|
【本文地址】
今日新闻 |
推荐新闻 |