Releases 路 Atmosphere |
您所在的位置：网站首页 › switch大气层awoo › Releases 路 Atmosphere |
|
1.6.1 is Atmosph猫re's seventy-sixth official release. Please be sure to update fusee when upgrading to 1.6.1. fusee-primary no longer exists, and will not work any more. Note: switch/haze.nro was updated in the release zip on 2023/10/16 at 3:40 PM PDT to fix an issue where haze could fail to work on Windows. The updated zip has a build hash of "7f4450f93". Please note: Atmosph猫re 1.6.1 is currently in pre-release, and issues may be found that need to be fixed before full release. If any bugs are reported while Atmosph猫re is in pre-release, they will be fixed and the build will be updated. 1.6.1 will transition to release after a short amount of time has passed without pressing bug reports.With thanks to the @switchbrew team, Atmosph猫re 1.6.1 is bundled with hbl 2.4.3, and hbmenu 3.5.1. The following was changed since the last release: An improved solution to the problem that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0 was added. In particular, booting atmosph猫re will now automatically detect the problem and unbrick any consoles which have fallen into this state. Some improvements were made to haze, including: Performance was greatly improved: Support was added for GetObjectPropList, which decreases the amount of requests made by ~8x. Haze now performs rendering on the GPU, freeing up the CPU to respond to requests in a more timely manner. An issue was fixed with how haze configures bMaxPacketSize0 which improves support for USB3. General system stability improvements to enhance the user's experience.And the following was changed in 1.6.0: Basic support was added for 17.0.0. The console should boot and atmosph猫re should be fully functional. However, not all modules have been fully updated to reflect the latest changes. There shouldn't be anything user visible resulting from this, but it will be addressed in a soon-to-come atmosph猫re update. exosph猫re was updated to reflect the latest official secure monitor behavior. mesosph猫re was updated to reflect the latest official kernel behavior. ncm was updated to reflect the latest official behavior. erpt was partially updated to support the latest official behavior. Atmosphere's gdbstub now supports waiting to attach to a specific program id on launch (as opposed to any application). The monitor command for this is monitor wait , where program id can optionally have an 0x prefix. Support was added to haze for editing files in-place and performing 64-bit transfers (files larger than 4 GB). bpc.mitm was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer). This should cause the console to no longer wake ~15 seconds after shutdown on Mariko. A number of minor issues were fixed and improvements were made, including: A workaround was added for a change in 17.0.0 that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0. General system stability improvements to enhance the user's experience.For information on the featureset supported by 1.6, please see the official release notes. |
今日新闻 |
推荐新闻 |
| CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |