SICOM3024P is a layer 2 managed industrial Ethernet switch designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. SICOM3024P supports up to 4 gigabit fiber/copper ports and 24 fast Ethernet fiber/copper ports, meets the IEC61850 and IEEE1613 standards and approved by KEMA. SICOM3024P is a 19-inch 1U rack mountable device and its internal modular design offers the maximum flexibility for easy expansion.SICOM3024P supports many Layer 2 software features such as port, VLAN, multicast, QoS, fast redundant ring. It supports Console, Telnet, Web management and network management software based on SNMP. At present, the product is widely used at the intelligent substation and many other industrial communication systems.

supports max 4 gigabit fiber/copper ports and 24 fast Ethernet fiber/copper ports Internal modular design for easy expansion Supports DT-Ring ,DRP, RSTP for network redundancy Supports IEC61850 MMS management(special firmware) Supports alarm and syslog upload Complies with IEC61850-3 and IEEE1613 KEMA, CE, FCC, UL, NEMA TS2

Software Functions

Switching Function

Supports VLAN and PVLAN Supports GVRP Supports port aggregation Supports flow control Supports port rate limit Supports broadcast storm suppression Supports static ARP Supports ARP aging time Supports static MAC address Supports MAC aging time Supports MAC learning setting

Redundancy Protocol

Supports DHP and DRP and the recovery time Supports DT-Ring, DT-Ring+, and DT-VLAN and the recovery time Supports STP/RSTP/MSTP

Multicast Protocol

Supports IGMP snooping，query and IGMP cross Supports GMRP Supports static multicast

Security

Supports IEEE 802.1x、 Supports HTTPs/SSL Supports SSH Supports RADIUS Supports TACACS+ Supports user grading Supports user login timeout Supports enhanced password Supports port isolate Supports MAC learing limit Supports remote access serurity

Service Quality Management

Supports ACL Supports 802.1p(CoS),DSCP Supports SP and WRR queuing

Management & Maintenance

Supports Console, Telnet, and Web management Supports SNMPv1/v2c/v3 and can managed by Kyvision Supports IEC61850 MMS server Supports software update via FTP Supports configuration upload/download via FTP/HTTP Supports the IP/MAC address conflict alarm, power failure alarm, power alarm, temperature alarm, port alarm, port flow alarm，CPU/memory usage alarm，login/logout alarm，config change alarm，and ring alarm Supports RMON Supports port mirroring Supports Syslog，save to flash or send to log server Supports LLDP Supports Link-check

IP Address Management

Supports DHCP server/client/snooping/option 82

Clock Management

Supports SNTP server/client Supports RTC Supports time zone and daylight saving time

Product Specifications

Standard

IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-TX and 100Base-FX) IEEE 802.3ab(1000Base-T) IEEE 802.3z(1000Base-SX/LX) IEEE 802.3ad (port aggregation) IEEE 802.3x(flow control) IEEE 802.1p(priority) IEEE 802.1Q(VLAN) IEEE 802.1w(RSTP)

Switch Properties

Priority queue: 4 Number of VLANs: 256 VLAN ID: 1–4093 Number of multicast groups: 256 MAC table: 8K Packet buffer: 4Mbit Packet forwarding rate: 9.5Mpps Switching delay:

Interface

Gigabit ports: 1000Base-X, SFP port 10/100/1000Base-T(X), RJ45 port Fast Ethernet ports: 100Base-FX, single/multi mode, SC/ST/FC connector 100Base-FX, SFP port(LC connector) 10/100Base-T(X), RJ45 port Console port: RS232,RJ45 Alarm contact: 3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2 A Max, 60 W Max

LED

LED on front panel Running LED: Run Alarm LED: Alarm Power LED: PWR1, PWR2 Port LED: Link/ACT Port speed LED: Speed LED on rear panel Port LED: Link/ACT Port speed LED: Speed

Power Requirements

Power input: 24VDC(18-36VDC), 48VDC(36-72VDC), 100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC) Power terminal: 5-pin 5.08 mm-spacing plug-in terminal block Power consumption: Overload protection: Support Reverse connection protection: Support Redundancy protection: Support

Physical Characteristics

Housing: Metal Cooling: Natural cooling, fanless Protection Class: IP40 Dimensions(WxHxD): 482.6mm×44mm×322.5mm Weight: 4Kg Mounting: 19 inch 1U rack mounting

Environmental Limits

Operating temperature: -40°C to +85°C Storage temperature: -40°C to +85°C Ambient Relative Humidity: 5% - 95% (non-condensing)

Quality Assurance

MTBF: 502802 hrs Warranty: 5 years

Approvals

KEMA: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC CE: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC FCC: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC UL508,Class I,Div2: All models NEMA TS2: Models with power supply of HV:100-240VAC,50/60Hz;110-220VDC IEC 61850-3, IEEE 1613 IEC 62368-1, EN 62368-1

Industry Standard

EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz-2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz-150kHz);10V(150kHz-80MHz) IEC61000-4-8(power frequency magnetic field) 100A/m(cont.),1000A/m(1s-3s) IEC61000-4-9(pulsed magnetic field) 1000A/m IEC61000-4-10(damped oscillation) 100A/m IEC61000-4-12(oscillatory wave) 2.5kV/CM,1kV/DM IEC61000-4-16(common mode conduction) 30V(cont.),300V(1s) Machinery: IEC60068-2-6 (vibration) IEC60068-2-27 (shock) IEC60068-2-32 (free fall) Climatic environmental: IEC60068-2-1 Cold test IEC60068-2-2 Dry heat test IEC60068-2-14 Change of temperature test IEC60068-2-30 Damp heat cyclic test IEC60068-2-78 Damp heat steady state test

Recommended model