为了安装RTL8811CU无限网卡驱动：

参考：https://github.com/brektrou/rtl8821CU

内核准备:

要求是4.4到5.6的，这里我选择更新到5.5.9，内核更新主要安装：

You may retrieve signed binary configuration files from one the above two links (varying by the major release number of the installation target machine). They may be automatically installed by root thus:

不装headers和devel无法继续安驱动

yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm

第三方网址：https://centos.pkgs.org/7/elrepo-kernel-x86_64/kernel-ml-devel-5.5.9-1.el7.elrepo.x86_64.rpm.html

kernel-ml-headers-5.5.9-1.el7.elrepo.x86_64

sudo yum install https://mirror.rackspace.com/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-headers-5.5.9-1.el7.elrepo.x86_64.rpm

kernel-ml-devel-5.5.9-1.el7.elrepo.x86_64

sudo yum install https://mirror.rackspace.com/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-devel-5.5.9-1.el7.elrepo.x86_64.rpm

kernel-ml-5.5.9-1.el7.elrepo.x86_64

sudo yum install https://mirror.rackspace.com/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-5.5.9-1.el7.elrepo.x86_64.rpm

最后，rpm -qa|grep kernel，获取安装过的列表。

dkms准备：

DKMS is a system which will automatically recompile and install a kernel module when a new kernel gets installed or updated. To make use of DKMS, install the dkms package.

###centos

rpm -ivh epel-release-7-0.2.noarch.rpm

yum -y install dkms

### Debian/Ubuntu: ``` sudo apt-get install dkms ```### Arch Linux/Manjaro: ``` sudo pacman -S dkms ```

驱动：第一种方法： ``` mkdir -p ~/build cd ~/build git clone https://github.com/brektrou/rtl8821CU.git ``` To make use of the **DKMS** feature with this project, just run: ``` ./dkms-install.sh ``` If you later on want to remove it, run: ``` ./dkms-remove.sh ```

第二种方法，直接

## Build and install without DKMS Use following commands: ``` cd ~/build/rtl8821CU make sudo make install ``` If you later on want to remove it, do the following: ``` cd ~/build/rtl8821CU sudo make uninstall ```

驱动如果检测出问题了：

### Plug your USB-wifi-adapter into your PC If wifi can be detected, congratulations. If not, maybe you need to switch your device usb mode by the following steps in terminal: 1. find your usb-wifi-adapter device ID, like "0bda:1a2b", by type: ``` lsusb ``` 2. switch the mode by type: (the device ID must be yours.) 改变模式

Need install `usb_modeswitch` (Archlinux: `sudo pacman -S usb_modeswitch`) ``` sudo usb_modeswitch -KW -v 0bda -p 1a2b systemctl start bluetooth.service - starting Bluetooth service if it's in inactive state ```驱动检查： If you successfully install the driver, the driver is installed on `/lib/modules//kernel/drivers/net/wireless/realtek/rtl8821cu`. Check the driver with the `ls` command: ``` ls /lib/modules/$(uname -r)/kernel/drivers/net/wireless/realtek/rtl8821cu ``` Make sure `8821cu.ko` file present on that directory

### Check with **DKMS** (if installing via **DKMS**):

`` sudo dkms status `` ### ARM architecture tweak for this driver (this solves compilation problem of this driver): ``` sudo cp /lib/modules/$(uname -r)/build/arch/arm/Makefile /lib/modules/$(uname -r)/build/arch/arm/Makefile.$(date +%Y%m%d%H%M) sudo sed -i 's/-msoft-float//' /lib/modules/$(uname -r)/build/arch/arm/Makefile sudo ln -s /lib/modules/$(uname -r)/build/arch/arm /lib/modules/$(uname -r)/build/arch/armv7l ``` ### Monitor mode Use the tool 'iw', please don't use other tools like 'airmon-ng' ``` iw dev wlan0 set monitor none ```