RocketMQ |
您所在的位置:网站首页 › rocketmq查看集群 › RocketMQ |
文章目录环境准备参考配置集群搭建130主机broker 配置文件启动namesrv启动broker Master 和 broker Slave131主机broker 配置文件启动namesrv启动broker Master 和 broker Slave查看集群监控状态测试发送和消费消息双机互为主备的配置RocketMQ4.3.X配置参数
完成了单节点的RocketMQ的安装 RocketMQ-初体验RocketMQ(02)_单节点RocketMQ的安装 ,我们来搞个2个节点的集群来玩下 环境准备 CentOS7 192.168.18.130 、192.168.18.131
Q: 生产环境,假设你有2台主机,应该如何部署RocketMQ集群更HA一些? A: 你有 A、B两台主机, A主机 部署 : broker-a 主节点 和 broker-b 从节点 B主机 部署: broker-b 主节点 和 borker-a 从节点 两台主机互为主备,HA更可靠一些,即使有一台主机,假设B主机 宕机了。 我们的A主机上 仍然还有是 broker-a 主节点 和 broker-b 从节点, 这个时候只是 broker-b 只能提供消费消息的能力了,不能写入了。 还是要比 整个 broker-b cluster 因为主机B的宕机而全部不能提供服务了好。 参考配置 在RocketMQ 安装目录 conf目录下,官方提供了一些参考配置 可以集合自己的场景,到对应的目录下看下官方推荐的配置。 集群搭建 130 : brokera-m brokera-s 131: brokerb-m brokerb-s broker集群在同一台主机上互为主备 。 每台机器上启动一个namesrv。 两个 broker节点,互为主备,构成一个broker集群。 130主机 broker 配置文件cp 两个文件出来 broker-m.conf master节点的配置文件 broker-s.conf slave节点的配置文件 broker-m.conf # Licensed to the Apache Software Foundation (ASF) under one or more# contributor license agreements. See the NOTICE file distributed with# this work for additional information regarding copyright ownership.# The ASF licenses this file to You under the Apache License, Version 2.0# (the "License"); you may not use this file except in compliance with# the License. You may obtain a copy of the License at## http://www.apache.org/licenses/LICENSE-2.0## Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an "AS IS" BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License. #集群名称,可自定义brokerClusterName=DefaultClusterbrokerName=broker‐a# 0 表示主节点brokerId=0# rocketmq‐name服务地址,多个地址用;分开,不配置默认为localhost:9876namesrvAddr=192.168.18.130:9876;192.168.18.131:9876deleteWhen=04fileReservedTime=48#当前节点角色brokerRole=SYNC_MASTERflushDiskType=ASYNC_FLUSHautoCreateTopicEnable=true#broker通信端口,默认端口listenPort=10911#消息存储根路径storePathRootDir=/data/rocketmq/store-m
broker-s.conf # Licensed to the Apache Software Foundation (ASF) under one or more# contributor license agreements. See the NOTICE file distributed with# this work for additional information regarding copyright ownership.# The ASF licenses this file to You under the Apache License, Version 2.0# (the "License"); you may not use this file except in compliance with# the License. You may obtain a copy of the License at## http://www.apache.org/licenses/LICENSE-2.0## Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an "AS IS" BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License. #集群名称,可自定义brokerClusterName=DefaultClusterbrokerName=broker‐a# 非0 表示从节点brokerId=1# rocketmq‐name服务地址,多个地址用;分开,不配置默认为localhost:9876namesrvAddr=192.168.18.130:9876;192.168.18.131:9876deleteWhen=04fileReservedTime=48#当前节点角色brokerRole=SLAVEflushDiskType=ASYNC_FLUSHautoCreateTopicEnable=true#broker通信端口,默认端口listenPort=10811#消息存储根路径storePathRootDir=/data/rocketmq/store-s
主要注意的地方 brokerName 主从节点 保持一致brokerId 0 表示主节点,从节点 1,2,3…依次类推namesrvAddr 配置所有 namesrv的地址,多个地址 使用 ; 分开brokerRole 这个要注意 主节点 SYNC_MASTER 或者 ASYNC_MASTER 从节点 SLAVElistenPort 确定端口不要重复占用,否则启动失败 启动namesrvnohup sh bin/mqnamesrv -n 192.168.18.130:9876& 最好通过-n指定主IP,否则的话有可能在多网卡 或者docker环境下 启动失败 [root@artisan rocketmq-all-4.3.2-bin-release]# pwd/usr/local/rocketmq/rocketmq-all-4.3.2-bin-release[root@artisan rocketmq-all-4.3.2-bin-release]# nohup sh bin/mqnamesrv -n 192.168.18.130:9876&[1] 9236[root@artisan rocketmq-all-4.3.2-bin-release]# nohup: ignoring input and appending output to ‘nohup.out’tail -f nohup.out 日志如下:Java HotSpot(TM) 64-Bit Server VM warning: Using the DefNew young collector with the CMS collector is deprecated and will likely be removed in a future releaseJava HotSpot(TM) 64-Bit Server VM warning: UseCMSCompactAtFullCollection is deprecated and will likely be removed in a future release.The Name Server boot success. serializeType=JSON
查看进程 [root@artisan rocketmq-all-4.3.2-bin-release]# jps |grep -v Jps9239 NamesrvStartup[root@artisan rocketmq-all-4.3.2-bin-release]# 启动broker Master 和 broker Slave 主节点: nohup sh bin/mqbroker -c conf/broker-m.conf & 从节点: nohup sh bin/mqbroker -c conf/broker-s.conf & [root@artisan rocketmq-all-4.3.2-bin-release]# >nohup.out 主节点启动 [root@artisan rocketmq-all-4.3.2-bin-release]# nohup sh bin/mqbroker -c conf/broker-m.conf &[2] 9415[root@artisan rocketmq-all-4.3.2-bin-release]# nohup: ignoring input and appending output to ‘nohup.out’tailf nohup.out The broker[brokerâa, 192.168.18.130:10911] boot success. serializeType=JSON and name server is 192.168.18.130:9876;192.168.18.131:9876 ^C^C 从节点启动 [root@artisan rocketmq-all-4.3.2-bin-release]# nohup sh bin/mqbroker -c conf/broker-s.conf &[3] 9495[root@artisan rocketmq-all-4.3.2-bin-release]# nohup: ignoring input and appending output to ‘nohup.out’tailf nohup.out The broker[brokerâa, 192.168.18.130:10911] boot success. serializeType=JSON and name server is 192.168.18.130:9876;192.168.18.131:9876 The broker[brokerâa, 192.168.18.130:10811] boot success. serializeType=JSON and name server is 192.168.18.130:9876;192.168.18.131:9876 ^C 查看进程 [root@artisan rocketmq-all-4.3.2-bin-release]# jps |grep -v Jps9239 NamesrvStartup9419 BrokerStartup9499 BrokerStartup[root@artisan rocketmq-all-4.3.2-bin-release]# 131主机 broker 配置文件 操作同130 , 唯一不同的就是这个 brokerName 。 这里贴下 配置 主节点 [root@artisan conf]# cat broker-m.conf # Licensed to the Apache Software Foundation (ASF) under one or more# contributor license agreements. See the NOTICE file distributed with# this work for additional information regarding copyright ownership.# The ASF licenses this file to You under the Apache License, Version 2.0# (the "License"); you may not use this file except in compliance with# the License. You may obtain a copy of the License at## http://www.apache.org/licenses/LICENSE-2.0## Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an "AS IS" BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License. #集群名称,可自定义brokerClusterName=DefaultClusterbrokerName=broker‐b# 0 表示主节点brokerId=0# rocketmq‐name服务地址,多个地址用;分开,不配置默认为localhost:9876namesrvAddr=192.168.18.130:9876;192.168.18.131:9876deleteWhen=04fileReservedTime=48#当前节点角色brokerRole=SYNC_MASTERflushDiskType=ASYNC_FLUSHautoCreateTopicEnable=true#broker通信端口,默认端口listenPort=10911#消息存储根路径storePathRootDir=/data/rocketmq/store-m
从节点 [root@artisan conf]# cat broker-s.conf # Licensed to the Apache Software Foundation (ASF) under one or more# contributor license agreements. See the NOTICE file distributed with# this work for additional information regarding copyright ownership.# The ASF licenses this file to You under the Apache License, Version 2.0# (the "License"); you may not use this file except in compliance with# the License. You may obtain a copy of the License at## http://www.apache.org/licenses/LICENSE-2.0## Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an "AS IS" BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License. #集群名称,可自定义brokerClusterName=DefaultClusterbrokerName=broker‐b# 非0 表示从节点brokerId=1# rocketmq‐name服务地址,多个地址用;分开,不配置默认为localhost:9876namesrvAddr=192.168.18.130:9876;192.168.18.131:9876deleteWhen=04fileReservedTime=48#当前节点角色brokerRole=SLAVEflushDiskType=ASYNC_FLUSHautoCreateTopicEnable=true#broker通信端口,默认端口listenPort=10811#消息存储根路径storePathRootDir=/data/rocketmq/store-s[root@artisan conf]# 启动namesrv 同130 启动broker Master 和 broker Slave同130 查看集群监控状态 mqadmin clusterlist -n 192.168.18.130:9876 [root@artisan rocketmq-all-4.3.2-bin-release]# sh bin/mqadmin clusterlist -n 192.168.18.130:9876Java HotSpot(TM) 64-Bit Server VM warning: ignoring option PermSize=128m; support was removed in 8.0Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=128m; support was removed in 8.0#Cluster Name #Broker Name #BID #Addr #Version #InTPS(LOAD) #OutTPS(LOAD) #PCWait(ms) #Hour #SPACEDefaultCluster brokerâa 0 192.168.18.130:10911 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1331DefaultCluster brokerâa 1 192.168.18.130:10811 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1331DefaultCluster brokerâb 0 192.168.18.131:10911 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1654DefaultCluster brokerâb 1 192.168.18.131:10811 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1654^C^C^C[root@artisan rocketmq-all-4.3.2-bin-release]# ^C[root@artisan rocketmq-all-4.3.2-bin-release]# sh bin/mqadmin clusterlist -n 192.168.18.131:9876Java HotSpot(TM) 64-Bit Server VM warning: ignoring option PermSize=128m; support was removed in 8.0Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=128m; support was removed in 8.0#Cluster Name #Broker Name #BID #Addr #Version #InTPS(LOAD) #OutTPS(LOAD) #PCWait(ms) #Hour #SPACEDefaultCluster brokerâa 0 192.168.18.130:10911 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1331DefaultCluster brokerâa 1 192.168.18.130:10811 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1331DefaultCluster brokerâb 0 192.168.18.131:10911 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1654DefaultCluster brokerâb 1 192.168.18.131:10811 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436943.73 0.1654[root@artisan rocketmq-all-4.3.2-bin-release]#
如果碰到了如下错误 [root@artisan bin]# ./mqadmin clusterlist -n 192.168.18.130:9876Java HotSpot(TM) 64-Bit Server VM warning: ignoring option PermSize=128m; support was removed in 8.0Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=128m; support was removed in 8.0org.apache.rocketmq.tools.command.SubCommandException: ClusterListSubCommand command failed at org.apache.rocketmq.tools.command.cluster.ClusterListSubCommand.execute(ClusterListSubCommand.java:93) at org.apache.rocketmq.tools.command.MQAdminStartup.main0(MQAdminStartup.java:132) at org.apache.rocketmq.tools.command.MQAdminStartup.main(MQAdminStartup.java:83)Caused by: org.apache.rocketmq.remoting.exception.RemotingTimeoutException: wait response on the channel timeout, 463(ms) at org.apache.rocketmq.remoting.netty.NettyRemotingAbstract.invokeSyncImpl(NettyRemotingAbstract.java:391) at org.apache.rocketmq.remoting.netty.NettyRemotingClient.invokeSync(NettyRemotingClient.java:374) at org.apache.rocketmq.client.impl.MQClientAPIImpl.getBrokerClusterInfo(MQClientAPIImpl.java:1180) at org.apache.rocketmq.tools.admin.DefaultMQAdminExtImpl.examineBrokerClusterInfo(DefaultMQAdminExtImpl.java:275) at org.apache.rocketmq.tools.admin.DefaultMQAdminExt.examineBrokerClusterInfo(DefaultMQAdminExt.java:222) at org.apache.rocketmq.tools.command.cluster.ClusterListSubCommand.printClusterBaseInfo(ClusterListSubCommand.java:172) at org.apache.rocketmq.tools.command.cluster.ClusterListSubCommand.execute(ClusterListSubCommand.java:88) ... 2 more[root@artisan bin]# ^C 重试几次[root@artisan bin]# ./mqadmin clusterlist -n 192.168.18.130:9876Java HotSpot(TM) 64-Bit Server VM warning: ignoring option PermSize=128m; support was removed in 8.0Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=128m; support was removed in 8.0#Cluster Name #Broker Name #BID #Addr #Version #InTPS(LOAD) #OutTPS(LOAD) #PCWait(ms) #Hour #SPACEDefaultCluster broker?a 0 192.168.18.130:10911 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436999.54 0.1360DefaultCluster broker?a 1 192.168.18.130:10811 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436999.54 0.1360DefaultCluster broker?b 0 192.168.18.131:10911 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436999.54 0.1690DefaultCluster broker?b 1 192.168.18.131:10811 V4_3_2 0.00(0,0ms) 0.00(0,0ms) 0 436999.54 0.1690[root@artisan bin]#
可能是mqadmin没能正确的连接进去!网络抖动,这个跟底层netty的连接有关. 多重试几次,一般都没问题。 测试发送和消费消息 [root@artisan rocketmq-all-4.3.2-bin-release]# export NAMESRV_ADDR=192.168.18.131:9876[root@artisan rocketmq-all-4.3.2-bin-release]# [root@artisan rocketmq-all-4.3.2-bin-release]# sh bin/tools.sh org.apache.rocketmq.example.quickstart.Producer
结果截个图: 测试消费者 [root@artisan rocketmq-all-4.3.2-bin-release]# sh bin/tools.sh org.apache.rocketmq.example.quickstart.Consumer
运行结果 截个图 是不是希望有个页面可以管理和查看集群信息呢? RocketMQ 提供了 RocketMQ Console ,下篇博文我们来看下如何通过拉取源码来搭建一套本地的RocketMQ Console吧 双机互为主备的配置 刚刚搭建的 是 左边的 ,生产环境更建议使用右侧的部署方式 配置的话 ,仅需要调整 broker-s.conf 中的 brokerName即可 131: broker-s.conf 130 : broker-s : 启动后,打开RocketMQConsole 看下,符合部署。 RocketMQ4.3.X配置参数 请移步 RocketMQ4.3.x 史上配置最全详解,没有之一
|
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |