RK3288 添加WiFi&BT模块AP6212 |
您所在的位置：网站首页 › rk3288发热严重 › RK3288 添加WiFi&BT模块AP6212 |
RK3288 添加WiFi&BT模块AP6212
|
CPU：RK3288 系统：Android 5.1
注：系统中自带的模块没有AP6212，相近的只有AP6210，设置为AP6210，直接添加固件也可以正常使用。 此文是手动添加AP6212的例程。
1、在设备树中修改 wifi 芯片为 ap6212， kernel/arch/arm/boot/dts/rk3288-tb_8846.dts diff --git a/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts b/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts index 6a65163..aa5480d 100755--- a/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts+++ b/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts @@ -42,7 +42,7 @@ * rtl8188eu, rtl8723bs, rtl8723bu * esp8089 */ - wifi_chip_type = "ap6330";+ wifi_chip_type = "ap6212"; sdio_vref = ; //1800mv or 3300mv
2、在 Kconfig 文件中增加 AP6212 选项。 /kernel/drivers/net/wireless/Kconfig diff --git a/kernel/drivers/net/wireless/Kconfig b/kernel/drivers/net/wireless/Kconfig index 544aa86..3e1026d 100755--- a/kernel/drivers/net/wireless/Kconfig+++ b/kernel/drivers/net/wireless/Kconfig @@ -84,6 +84,10 @@ choice config AP6210 bool "AP6210" depends on RKWIFI+ + config AP6212+ bool "AP6212"+ depends on RKWIFI config AP6234 bool "AP6234"
3、在配置文件 rockchip_defconfig 中屏蔽旧 wifi 芯片，增加新的 wifi 芯片 kernel/arch/arm/configs/rockchip_defconfig diff --git a/kernel/arch/arm/configs/rockchip_defconfig b/kernel/arch/arm/configs/rockchip_defconfig index e7c697a..5199ec0 100755--- a/kernel/arch/arm/configs/rockchip_defconfig+++ b/kernel/arch/arm/configs/rockchip_defconfig @@ -299,7 +299,7 @@ CONFIG_USB_SIERRA_NET=y CONFIG_RTL8188EU=y CONFIG_ESP8089=y CONFIG_RKWIFI=y-CONFIG_AP6335=y+# CONFIG_AP6335 is not set+CONFIG_AP6212=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_KEYRESET=y
4、此时串口打印中会出现打开文件 fw_bcm43438a1.bin 失败，需要更新 wifi 模块固件。 [ 18.686420] dhdsdio_download_code_file: Open firmware file failed /system/etc/firmware/fw_bcm43438a1.bin [ 18.686430] _dhdsdio_download_firmware: dongle image file download failedWiFI 固件路径：/external/wlan_loader/firmware 将模块供应商提供的固件文件拷贝到此目录下，然后编译烧录。 external/wlan_loader/firmware/fw_bcm43438a1.bin external/wlan_loader/firmware/fw_bcm43438a1_apsta.bin external/wlan_loader/firmware/fw_bcm43438a1_p2p.bin external/wlan_loader/firmware/nvram_ap6212.txt
编译后，系统会将模块固件拷贝到 out/target/product/rk3288/system/etc//firmware/ 目录下 如果只是调试，可以通过 adb 将固件 push 到 /system/etc//firmware/ 目录下，然后重启。 kernel/drivers/net/wireless/rockchip_wlan/rkwifi/rk_wifi_config.c wifi 驱动路径：kernel/net/rfkill/rfkill-wlan.c
如果器件升级，比如器件为AP6212A，供应商给的文件问 nvram_ap6212a.txt，则需要修改下面文件。（直接用以前的 nvram_ap6212.txt 也可以用，但文件不一样，不清楚） 路径：\kernel\drivers\net\wireless\rockchip_wlan\rkwifi\bcmdhd\dhd_config.c diff --git a/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c b/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c index 39641e1..91d7925 100755--- a/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c+++ b/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c @@ -477,7 +477,7 @@ dhd_conf_set_fw_name_by_chip(dhd_pub_t *dhd, char *fw_path, char *nv_path) strcpy(&fw_path[i+1], bcm43438a0_fw_name[fw_type]); else if (chiprev == BCM43430A1_CHIP_REV) strcpy(&fw_path[i+1], bcm43438a1_fw_name[fw_type]);- strcpy(&nv_path[j+1], "nvram_ap6212.txt");+ strcpy(&nv_path[j+1], "nvram_ap6212a.txt");break; case BCM43340_CHIP_ID: if (chiprev == BCM43340B0_CHIP_REV)
5、BT 驱动中增添代码，支持 AP6212 BT 驱动路径：kernel/net/rfkill/rfkill-bt.c diff --git a/kernel/net/rfkill/rfkill-bt.c b/kernel/net/rfkill/rfkill-bt.c index a1a156c..3070080 100755--- a/kernel/net/rfkill/rfkill-bt.c+++ b/kernel/net/rfkill/rfkill-bt.c @@ -95,6 +95,8 @@ static const char bt_name[] = #else "ap6210_24M" #endif+#elif defined(CONFIG_AP6212) + "ap6212" #elif defined(CONFIG_AP6330) "ap6330" #elif defined(CONFIG_AP6476)@@ -266,7 +268,7 @@ static int rfkill_rk_set_power(void *data, bool blocked) struct rfkill_rk_data *rfkill = data; struct rfkill_rk_gpio *poweron = &rfkill->pdata->poweron_gpio; struct rfkill_rk_gpio *reset = &rfkill->pdata->reset_gpio;-#if defined(CONFIG_AP6210) || defined(CONFIG_AP6335) +#if defined(CONFIG_AP6210) || defined(CONFIG_AP6212) || defined(CONFIG_AP6335) struct rfkill_rk_gpio* rts = &rfkill->pdata->rts_gpio; struct pinctrl *pinctrl = rfkill->pdata->pinctrl; #endif@@ -307,7 +309,7 @@ static int rfkill_rk_set_power(void *data, bool blocked) msleep(20); gpio_direction_output(reset->io, reset->enable); }-#if defined(CONFIG_AP6210) || defined(CONFIG_AP6335) +#if defined(CONFIG_AP6210) || defined(CONFIG_AP6212) || defined(CONFIG_AP6335) if (pinctrl != NULL && gpio_is_valid(rts->io)) { pinctrl_select_state(pinctrl, rts->gpio_state);到此 AP6212 就可以正常使用了，但是不知道供应商提供的 BT 固件应该拷贝到哪里。
|
【本文地址】
今日新闻 |
推荐新闻 |