锐捷交换机密码恢复(1) |
您所在的位置:网站首页 › onu交换机恢复密码 › 锐捷交换机密码恢复(1) |
如果管理员忘记登陆密码,那么此时可通过配置线进入Boot层进行密码恢复,需要保留之前的配置信息。 一:配置步骤 1、重启路由器,进入Boot层的命令行模式 重启路由,在出现Press Ctrl+C to enter Ctrl ....时,同时按下键盘的Ctrl+C键,即可进入Ctrl层的命令行模式,设备会出现 Ctrlr>提示符 我们可以在Ctrl模式下查看帮助 2、重命名配置文件 Ctrl>rename config.text config.bak // 把配置文件重名为config.bak 3、重启设备 Ctrl>reload 4、恢复配置文件 5、配置新密码并保存设备配置 RSR7708#configure terminal RSR7708(config)#enable secret ruijie RSR7708(config)#end RSR7708#*Mar 8 10:36:56: %SYS-5-CONFIG_I: Configured from console by console *Mar 8 10:36:56: %PARAM-6-CONFIG_SYNC: Sync'ing the running configuration to the standby supervisor. *Mar 8 10:36:56: %PARAM-6-CONFIG_SYNC: The running configuration has been successfully synchronized to the standby supervisor. RSR7708#write Building configuration... [OK] RSR7708#*Mar 8 10:37:01: %PARAM-6-CONFIG_SYNC: Sync'ing the startup configuration to the standby supervisor. *Mar 8 10:37:01: %PARAM-6-CONFIG_SYNC: The startup configuration has been successfully synchronized to the standby supervisor. 重新设置密码后,就可以使用新密码进入系统了,其它原有配置不变。 以上方法是保留配置文件恢复密码。如果不保留配置文件恢复密码可以在Ctrl模式下delete config.text |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |