中标麒麟操作系统yum源配置 |
您所在的位置：网站首页 › netware优缺点 › 中标麒麟操作系统yum源配置 |
|
关闭防火墙 步骤1停止防火墙。# systemctl stop firewalld.service 步骤2关闭防火墙。# systemctl disable firewalld.service 修改SELINUX为disabled 步骤1关闭防火墙。 # sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/sysconfig/selinux 中标麒麟操作系统yum源配置在 linux 系统上，解决软件包之间的依赖关系是很重要的事。很多工作无法实现可能就是因为缺少一个软件包，而当你千方百计找到这个软件包的时候，却发现它跟当前系统不兼容。所以，要做的非常重要的一件事情就是给系统添加软件仓库，以确保能安装使用大部分软件包。（亲测）建议看完文章再动手配置 实验环境： [1-06@localhost Desktop]$ uname -aLinux localhost 4.4.13-200.nd7.3.x86_64 #1 SMP Sat Jul 8 23:22:12 CST 2017 x86_64 x86_64 x86_64 GNU/Linux中标麒麟软件下载命令为：yum install 和fedora，Redhat，centos类似，相似于centos系统 中标麒麟-网易163 yum源配置1.进入到/etc/yum/repos.d/目录中（该目录存放着yum软件仓库的配置文件） [2-05@localhost yum.repos.d]$ cd /etc/yum.repos.d/ [2-05@localhost yum.repos.d]$ lsneokylin.repo; neokylin-updates.repo
2.删除原有的yum源 [2-05@localhost yum.repos.d]$ rm -f *3.使用vim编辑器创建一个新的配置文件（文件名称可随意，但后缀必须为.repo） [2-05@localhost yum.repos.d]$ sudo vim mirrors.163.com.repo 配置参数: [2-05@localhost yum.repos.d]$ cat mirrors.163.com.repo[mirrors.163.com]name=mirrors.163.combaseurl=http://mirrors.163.com/centos/7/os/x86_64/enabled=1gpgcheck=04.检查配置是否正确 [2-05@localhost yum.repos.d]$ yum repolist已加载插件：langpacksmirrors.163.com | 3.6 kB 00:00:00 (1/2): mirrors.163.com/group_gz | 166 kB 00:00:00 (2/2): mirrors.163.com/primary_db | 6.0 MB 00:00:01 源标识 源名称 状态mirrors.163.com mirrors.163.com 10,019repolist: 10,0195.更新Yum缓存 [root@localhost yum.repos.d]# yum list[root@localhost yum.repos.d]# yum clean all [root@localhost yum.repos.d]# yum makecache 中标麒麟-阿里云yum源配置1.在线下载【需要连网】 wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo2.Centos-7.repo文件中以$开始的变量进行替换 sed -i 's/$releasever/7/g' /etc/yum.repos.d/CentOS-Base.repo3.使用vim编辑器创建一个新的配置文件（文件名称可随意，但后缀必须为.repo） [2-05@localhost yum.repos.d]$ sudo vim mirrors.163.com.repo 配置参数: [2-05@localhost yum.repos.d]$ cat mirrors.163.com.repo[mirrors.163.com]name=mirrors.163.combaseurl=http://mirrors.163.com/centos/7/os/x86_64/enabled=1gpgcheck=04.检查配置是否正确 [2-05@localhost yum.repos.d]$ yum repolist已加载插件：langpacksmirrors.163.com | 3.6 kB 00:00:00 (1/2): mirrors.163.com/group_gz | 166 kB 00:00:00 (2/2): mirrors.163.com/primary_db | 6.0 MB 00:00:01 源标识 源名称 状态mirrors.163.com mirrors.163.com 10,019repolist: 10,0195.更新Yum缓存 [root@localhost yum.repos.d]# yum list[root@localhost yum.repos.d]# yum clean all [root@localhost yum.repos.d]# yum makecache 中标麒麟-阿里云yum源配置1.在线下载【需要连网】 wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo2.Centos-7.repo文件中以$开始的变量进行替换 sed -i 's/$releasever/7/g' /etc/yum.repos.d/CentOS-Base.repo3.更新yum缓存 清空缓存：yum clean all生成缓存：yum makecache 中标麒麟-官方yum源配置注意 ：操作系统使用的源不同可能会对整个操作系统产生影响，用户想要使用中标麒麟官方源，可按照下面配置 /etc/yum.repo.d/ 中的源文件。在/etc/yum.repo.d/ 文件夹中有neokylin.repo和neokylin-updates.repo两个文件配置如下： neokylin.repo [root@localhost yum.repos.d]# cat neokylin.repo [neokylin]name= NeoKylin 7.0baseurl=http://download.cs2c.com.cn/neokylin/desktop/releases/7.0/x86_64/zx/os/enabled=1gpgcheck=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-neokylin-$basearch [neokylin-32]name= NeoKylin 7.0 32-bitbaseurl=http://download.cs2c.com.cn/neokylin/desktop/releases/7.0/i386/os/enabled=1gpgcheck=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-neokylin-i386neokylin-updates.repo [root@localhost yum.repos.d]# cat neokylin-updates.repo [neokylin-updates]name= NeoKylin 7.0 Updatesbaseurl=http://download.cs2c.com.cn/neokylin/desktop/updates/7.0/x86_64/zx/os/enabled=1gpgcheck=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-neokylin-$basearch [neokylin-updates-32]name= NeoKylin 7.0 Updates 32-bitbaseurl=http://download.cs2c.com.cn/neokylin/desktop/updates/7.0/i386/os/enabled=1gpgcheck=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-neokylin-i386问题：本人设置的官方yum源中，包含32位和64位yum源配置，在使用的时候可以根据自己的需求对yum源进行配置。本人在使用yum源【官方yum源、163或centos源都会出现这种问题】安装软件的时候会出现很多软件包依赖问题，解决办法在下面文章中。【在下在网上查找一种方法，使用 NeoKylin-Live-Desktop-7.0-SDK-x86_64-B036-20160811.iso 镜像安装软件解决依赖包问题，目前还在测试中 】 ---> Package xml-commons-resolver.noarch 0:1.2-17.nd7.1 will be installed--> Finished Dependency ResolutionError: Package: 1:cups-1.7.5-13.nd7.4.x86_64 (neokylin) Requires: libdbus-1.so.3(LIBDBUS_1_3)(64bit) Available: 1:dbus-libs-1.8.6-3.nd7.4.x86_64 (neokylin) libdbus-1.so.3(LIBDBUS_1_3)(64bit) Installed: 1:dbus-libs-1.8.20-1.nd7.1.x86_64 (@neokylin-updates-32/"7.0") Not found Available: 1:dbus-libs-1.8.6-3.nd7.1.i686 (neokylin-32) Not foundError: Package: filezilla-3.8.1-3.nd7.7.x86_64 (neokylin) Requires: libdbus-1.so.3(LIBDBUS_1_3)(64bit) Available: 1:dbus-libs-1.8.6-3.nd7.4.x86_64 (neokylin) libdbus-1.so.3(LIBDBUS_1_3)(64bit) Installed: 1:dbus-libs-1.8.20-1.nd7.1.x86_64 (@neokylin-updates-32/"7.0") Not found Available: 1:dbus-libs-1.8.6-3.nd7.1.i686 (neokylin-32) Not foundError: Package: caja-1.8.2-1.nd7.105.x86_64 (neokylin-updates) Requires: libdbus-1.so.3(LIBDBUS_1_3)(64bit) Available: 1:dbus-libs-1.8.6-3.nd7.4.x86_64 (neokylin) libdbus-1.so.3(LIBDBUS_1_3)(64bit) Installed: 1:dbus-libs-1.8.20-1.nd7.1.x86_64 (@neokylin-updates-32/"7.0") Not found Available: 1:dbus-libs-1.8.6-3.nd7.1.i686 (neokylin-32) Not found 2019-09-15【新增】进过多次折腾终于可以实现yum update更新 1、实验环境： [root@root01 ~]# cat /etc/issueNeoKylin Linux Desktop release 7.0 (zhaoxin)Kernel \r on an \m (\l) [root@root01 ~]# uname -aLinux root01 4.4.13-200.nd7.3.x86_64 #1 SMP Sat Jul 8 23:22:12 CST 2017 x86_64 x86_64 x86_64 GNU/Linux[root@root01 ~]# 2、官方yum源： [root@root01 ~]# cd /etc/yum.repos.d/ [root@root01 yum.repos.d]# lsneokylin.repo neokylin-updates.repo [root@root01 yum.repos.d]# cat neokylin* [neokylin]name= NeoKylin 7.0baseurl=http://download.cs2c.com.cn/neokylin/desktop/releases/7.0/x86_64/zx/os/enabled=1gpgcheck=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-neokylin-$basearch [neokylin-updates]name= NeoKylin 7.0 Updatesbaseurl=http://download.cs2c.com.cn/neokylin/desktop/updates/7.0/x86_64/zx/os/enabled=1gpgcheck=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-neokylin-$basearch 3、错误提示及解决： [root@root01 yum.repos.d]# yum -y update --skip-brokenLoaded plugins: fastestmirror, langpacksLoading mirror speeds from cached hostfileResolving Dependencies--> Running transaction check---> Package PackageKit.x86_64 0:1.0.10-1.nd7.3 will be updated。。。。。。 Error: Multilib version problems found. This often means that the root cause is something else and multilib version checking is just pointing out that there is a problem. Eg.: 1. You have an upgrade for gtk3 which is missing some dependency that another package requires. Yum is trying to solve this by installing an older version of gtk3 of the different architecture. If you exclude the bad architecture yum will tell you what the root cause is (which package requires what). You can try redoing the upgrade with --exclude gtk3.otherarch ... this should give you an error message showing the root cause of the problem. 2. You have multiple architectures of gtk3 installed, but yum can only see an upgrade for one of those architectures. If you don't want/need both architectures anymore then you can remove the one with the missing update and everything will work. 3. You have duplicate versions of gtk3 installed already. You can use "yum check" to get yum show these errors. ...you can also use --setopt=protected_multilib=false to remove this checking, however this is almost never the correct thing to do as something else is very likely to go wrong (often causing much more problems). Protected multilib versions: gtk3-3.22.10-5.nd7.1.x86_64 != gtk3-3.14.15-1.nd7.2.x86_64[root@root01 yum.repos.d]# yum install gtk3Loaded plugins: fastestmirror, langpacksLoading mirror speeds from cached hostfileResolving Dependencies--> Running transaction check---> Package gtk3.x86_64 0:3.14.15-1.nd7.2 will be updated[root@root01 yum.repos.d]# yum -y update --skip-broken。。。。。。成功执行update命令Replaced: PackageKit-cached-metadata.x86_64 0:1.0.10-1.nd7.3 libertas-usb8388-firmware.noarch 2:20150904-56.git6ebf5d57.nd7.1 xorg-x11-drv-modesetting.x86_64 0:0.9.0-2.nd7.1 Complete!
|
今日新闻 |
推荐新闻 |
| CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |