MacOS 控制固态磁盘写入量,设置定时任务监控

您所在的位置:网站首页 mac查看硬盘写入量 MacOS 控制固态磁盘写入量,设置定时任务监控

MacOS 控制固态磁盘写入量,设置定时任务监控

2024-07-16 14:44| 来源: 网络整理| 查看: 265

M1 芯片的内存交换策略非常激进,导致 内存较小的机型 固态硬盘写入量十分恐怖,网上很多人都有类似的遭遇。

如何看待 8G 256G M1 MacBook Air 使用一个月硬盘写入 22TB+?

而固态硬盘是有擦除、写入寿命的,一般就按100次算,256G 大概就是 250TB。当然,并不是说超过这个数,硬盘就坏了,只是一般超过这个数,再坏,厂商就不包了。具体不同型号、不同厂商也会给不同的 TBW (Total Bytes Written)

查询磁盘写入量 安装磁盘工具smartmontools: brew install smartmontools smartctl -a disk0

Data Units Written 就是磁盘写入量,10个月左右的写入量 39 T

=== START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 34 Celsius Available Spare: 100% Available Spare Threshold: 99% Percentage Used: 2% Data Units Read: 127,486,481 [65.2 TB] Data Units Written: 76,316,904 [39.0 TB] Host Read Commands: 1,790,447,762 Host Write Commands: 694,652,609 Controller Busy Time: 0 Power Cycles: 197 Power On Hours: 934 Unsafe Shutdowns: 8 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 设置定时任务监控磁盘写入量

写一个 python 脚本 smart-daily.py,放在合适的位置,log 的目录,自己看着改。

chmod+x smart-daily.py 添加执行权限。第一行不能删,否则不能直接 smart-daily.py 执行。

#!/usr/bin/env python import os import time import re command_result = os.popen("smartctl -a disk0").read() lines = command_result.splitlines() for line in lines: if line.find("Data Units Written") != -1: # print(line) start_index = re.search(r"\d", line).start() line = line[start_index:] with open('DataWritten.log', mode='a', encoding='utf-8') as f: f.write(time.strftime("%Y-%m-%d %H:%M:%S: ", time.localtime()) + line + "\n")

定时任务的设置参考:mac 定时执行python脚本

如何减少磁盘写入量?

根本的办法是加钱买更大内存,此外,以下几种方法

注意保护

实测一段时间,上面的方法都一般,无法根治这个问题,我也是买之前没做足功课,入手了丐版 8+256 Macbook,日常就是用用 Edge,IDEA,Pycharm,不到一年时间固态写了将近40T。

只能自己没事多留心,别同时开太多吃内存的软件,用不到的软件就 Command+Q 。

外接固态

外接一个固态硬盘,下载的东西都直接存入固态中,但对正常用户来说,这并不是磁盘写入量的罪魁祸首。

减小 WindowServer 内存占用

占用过多mac内存的WindowServer是什么

关闭虚拟内存

即使关闭了虚拟内存,也不会影响系统稳定性,因为超过阈值又会继续使用虚拟内存,其实效果并不是很好,开个 IDEA 内存就飚起来了。但关闭后就可以在没必要的情况下不去使用虚拟内存。

M1关闭虚拟内存(交换内存 swap memory) 防止SSD磨损

关闭 Spotlight 索引

https://www.v2ex.com/t/874851

但直接关闭索引对正常使用太影响了,比较折中的办法是设置一个 crontab 定时任务,每天允许 Spotlight 索引一个小时。

Disable spotlight indexing on macOS to heavily speed up Virtual Instances. # massively increase virtualized macOS by disabling spotlight. sudo mdutil -i off -a # since you can't use spotlight to find apps, you can renable with # sudo mdutil -i on -a


【本文地址】


今日新闻


推荐新闻


CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3