iptables禁止端口和开放端口 |
您所在的位置:网站首页 › iptables禁止udp端口 › iptables禁止端口和开放端口 |
1、关闭所有的 INPUT FORWARD OUTPUT 只对某些端口开放。 下面是命令实现: iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP 再用命令 iptables -L -n 查看 是否设置好, 好看到全部 DROP 了 这样的设置好了,我们只是临时的, 重启服务器还是会恢复原来没有设置的状态 还要使用 service iptables save 进行保存 看到信息 firewall rules 防火墙的规则 其实就是保存在 /etc/sysconfig/iptables 可以打开文件查看 vi /etc/sysconfig/iptables 2、 下面我只打开22端口,看我是如何操作的,就是下面2个语句 iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT 再查看下 iptables -L -n 是否添加上去, 看到添加了 Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:22 现在Linux服务器只打开了22端口,用putty.exe测试一下是否可以链接上去。 可以链接上去了,说明没有问题。 最后别忘记了保存 对防火墙的设置 通过命令:service iptables save 进行保存 iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT 针对这2条命令进行一些讲解吧 -A 参数就看成是添加一条 INPUT 的规则 -p 指定是什么协议 我们常用的tcp 协议,当然也有udp 例如53端口的DNS 到时我们要配置DNS用到53端口 大家就会发现使用udp协议的 而 --dport 就是目标端口 当数据从外部进入服务器为目标端口 反之 数据从服务器出去 则为数据源端口 使用 --sport -j 就是指定是 ACCEPT 接收 或者 DROP 不接收 3、禁止某个IP访问 1台Linux服务器,2台windows xp 操作系统进行访问 Linux服务器ip 192.168.1.99 xp1 ip: 192.168.1.2 xp2 ip: 192.168.1.8 下面看看我2台xp 都可以访问的 192.168.1.2 这是 xp1 可以访问的, 192.168.1.8 xp2 也是可以正常访问的。 那么现在我要禁止 192.168.1.2 xp1 访问, xp2 正常访问, 下面看看演示 通过命令 iptables -A INPUT -p tcp -s 192.168.1.2 -j DROP 这里意思就是 -A 就是添加新的规则, 怎样的规则呢? 由于我们访问网站使用tcp的, 我们就用 -p tcp , 如果是 udp 就写udp,这里就用tcp了, -s就是 来源的意思, ip来源于 192.168.1.2 ,-j 怎么做 我们拒绝它 这里应该是 DROP 好,看看效果。好添加成功。下面进行验证 一下是否生效 一直出现等待状态 最后 该页无法显示 ,这是 192.168.1.2 xp1 的访问被拒绝了。 再看看另外一台 xp 是否可以访问, 是可以正常访问的 192.168.1.8 是可以正常访问的 4、如何删除规则 首先我们要知道 这条规则的编号,每条规则都有一个编号 通过 iptables -L -n --line-number 可以显示规则和相对应的编号 num target prot opt source destination 1 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 2 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 3 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 多了 num 这一列, 这样我们就可以 看到刚才的规则对应的是 编号2 那么我们就可以进行删除了 iptables -D INPUT 2 删除INPUT链编号为2的规则。 再 iptables -L -n 查看一下 已经被清除了。 5、过滤无效的数据包 假设有人进入了服务器,或者有病毒木马程序,它可以通过22,80端口像服务器外传送数据。 它的这种方式就和我们正常访问22,80端口区别。它发向外发的数据不是我们通过访问网页请求 而回应的数据包。 下面我们要禁止这些没有通过请求回应的数据包,统统把它们堵住掉。 iptables 提供了一个参数 是检查状态的,下面我们来配置下 22 和 80 端口,防止无效的数据包。 iptables -A OUTPUT -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT 可以看到和我们以前使用的: iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT 多了一个状态判断。 同样80端口也一样, 现在删掉原来的2条规则, iptables -L -n --line-number 这个是查看规则而且带上编号。我们看到编号就可以 删除对应的规则了。 iptables -D OUTPUT 1 这里的1表示第一条规则。 当你删除了前面的规则, 编号也会随之改变。看到了吧。 好,我们删除了前面2个规则,22端口还可以正常使用,说明没问题了 下面进行保存,别忘记了,不然的话重启就会还原到原来的样子。 service iptables save 进行保存。 Saving firewall rules to /etc/sysconfig/iptables: [ OK ] 其实就是把刚才设置的规则写入到 /etc/sysconfig/iptables 文件中。 6、DNS端口53设置 下面我们来看看如何设置iptables来打开DNS端口,DNS端口对应的是53 大家看到我现在的情况了吧,只开放22和80端口, 我现在看看能不能解析域名。 host www.google.com 输入这个命令后,一直等待,说明DNS不通 出现下面提示 : ;; connection timed out; no servers could be reached ping 一下域名也是不通 [root@localhost ~ping www.google.com ping: unknown host www.google.com 我这里的原因就是 iptables 限制了53端口。 有些服务器,特别是Web服务器减慢,DNS其实也有关系的,无法发送包到DNS服务器导致的。 下面演示下如何使用 iptables 来设置DNS 53这个端口,如果你不知道 域名服务端口号,你 可以用命令 : grep domain /etc/services [root@localhost ~grep domain /etc/services domain 53/tcp # name-domain server domain 53/udp domaintime 9909/tcp # domaintime domaintime 9909/udp # domaintime 看到了吧, 我们一般使用 udp 协议。 好了, 开始设置。。。 iptables -A OUTPUT -p udp --dport 53 -j ACCEPT 这是我们 ping 一个域名,数据就是从本机出去,所以我们先设置 OUTPUT, 我们按照ping这个流程来设置。 然后 DNS 服务器收到我们发出去的包,就回应一个回来 iptables -A INPUT -p udp --sport 53 -j ACCEPT 同时还要设置 iptables -A INPUT -p udp --dport 53 -j ACCEPT iptables -A OUTPUT -p udp --sport 53 -j ACCEPT 好了, 下面开始测试下, 可以用 iptables -L -n 查看设置情况,确定没有问题就可以测试了 [root@localhost ~iptables -L -n Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:22 state ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:80 state ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 可以测试一下 是否 DNS 可以通过iptables 了。 [root@localhost ~host www.google.com www.google.com is an alias for www.l.google.com. www.l.google.com is an alias for www-china.l.google.com. www-china.l.google.com has address 64.233.189.104 www-china.l.google.com has address 64.233.189.147 www-china.l.google.com has address 64.233.189.99 正常可以解析 google 域名。 ping 方面可能还要设置些东西。 用 nslookup 看看吧 [root@localhost ~nslookup > www.google.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: www.google.com canonical name = www.l.google.com. www.l.google.com canonical name = www-china.l.google.com. Name: www-china.l.google.com Address: 64.233.189.147 Name: www-china.l.google.com Address: 64.233.189.99 Name: www-china.l.google.com Address: 64.233.189.104 说明本机DNS正常, iptables 允许53这个端口的访问。 7、iptables对ftp的设置 现在我开始对ftp端口的设置,按照我们以前的视频,添加需要开放的端口 ftp连接端口有2个 21 和 20 端口,我现在添加对应的规则。 [root@localhost rootiptables -A INPUT -p tcp --dport 21 -j ACCEPT [root@localhost rootiptables -A INPUT -p tcp --dport 20 -j ACCEPT [root@localhost rootiptables -A OUTPUT -p tcp --sport 21 -j ACCEPT [root@localhost rootiptables -A OUTPUT -p tcp --sport 20 -j ACCEPT 好,这样就添加完了,我们用浏览器访问一下ftp,出现超时。 所以我刚才说 ftp 是比较特殊的端口,它还有一些端口是 数据传输端口, 例如目录列表, 上传 ,下载 文件都要用到这些端口。 而这些端口是 任意 端口。。。 这个 任意 真的比较特殊。 如果不指定什么一个端口范围, iptables 很难对任意端口开放的, 如果iptables允许任意端口访问, 那和不设置防火墙没什么区别,所以不现实的。 那么我们的解决办法就是 指定这个数据传输端口的一个范围。 下面我们修改一下ftp配置文件。 我这里使用vsftpd来修改演示,其他ftp我不知道哪里修改,大家可以找找资料。 [root@localhost rootvi /etc/vsftpd.conf 在配置文件的最下面 加入 pasv_min_port=30001 pasv_max_port=31000 然后保存退出。 这两句话的意思告诉vsftpd, 要传输数据的端口范围就在30001到31000 这个范围内传送。 这样我们使用 iptables 就好办多了,我们就打开 30001到31000 这些端口。 [root@localhost rootiptables -A INPUT -p tcp --dport 30001:31000 -j ACCEPT [root@localhost rootiptables -A OUTPUT -p tcp --sport 30001:31000 -j ACCEPT [root@localhost rootservice iptables save 最后进行保存, 然后我们再用浏览器范围下 ftp。可以正常访问 用个账号登陆上去,也没有问题,上传一些文件上去看看。 看到了吧,上传和下载都正常。。 再查看下 iptables 的设置 [root@localhost rootiptables -L -n Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:30001:31000 Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spts:30001:31000 这是我为了演示ftp特殊端口做的简单规则,大家可以添加一些对数据包的验证 例如 -m state --state ESTABLISHED,RELATED 等等要求更加高的验证
iptables 防火墙 只允许某IP访问某端口、访问特定网站 需要开80端口,指定IP和局域网
下面三行的意思: 先关闭所有的80端口 开启ip段192.168.1.0/24端的80口 开启ip段211.123.16.123/24端ip段的80口 # iptables -I INPUT -p tcp --dport 80 -j DROP # iptables -I INPUT -s 192.168.1.0/24 -p tcp --dport 80 -j ACCEPT # iptables -I INPUT -s 211.123.16.123/24 -p tcp --dport 80 -j ACCEPT 以上是临时设置。 1.先备份iptables # cp /etc/sysconfig/iptables /var/tmp 2.然后保存iptables # service iptables save 3.重启防火墙 #service iptables restart 以下是端口,先全部封再开某些的IP iptables -I INPUT -p tcp --dport 9889 -j DROP iptables -I INPUT -s 192.168.1.0/24 -p tcp --dport 9889 -j ACCEPT 如果用了NAT转发记得配合以下才能生效 iptables -I FORWARD -p tcp --dport 80 -j DROP iptables -I FORWARD -s 192.168.1.0/24 -p tcp --dport 80 -j ACCEPT
常用的IPTABLES规则如下: 只能收发邮件,别的都关闭 iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -j DROP iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -p udp --dport 53 -j ACCEPT iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -p tcp --dport 25 -j ACCEPT iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -p tcp --dport 110 -j ACCEPT IPSEC NAT 策略 iptables -I PFWanPriv -d 192.168.100.2 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:80 iptables -t nat -A PREROUTING -p tcp --dport 1723 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:1723 iptables -t nat -A PREROUTING -p udp --dport 1723 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:1723 iptables -t nat -A PREROUTING -p udp --dport 500 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:500 iptables -t nat -A PREROUTING -p udp --dport 4500 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:4500 FTP服务器的NAT iptables -I PFWanPriv -p tcp --dport 21 -d 192.168.100.200 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 21 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.200:21 只允许访问指定网址 iptables -A Filter -p udp --dport 53 -j ACCEPT iptables -A Filter -p tcp --dport 53 -j ACCEPT iptables -A Filter -d www.3322.org -j ACCEPT iptables -A Filter -d img.cn99.com -j ACCEPT iptables -A Filter -j DROP 开放一个IP的一些端口,其它都封闭 iptables -A Filter -p tcp --dport 80 -s 192.168.100.200 -d www.pconline.com.cn -j ACCEPT iptables -A Filter -p tcp --dport 25 -s 192.168.100.200 -j ACCEPT iptables -A Filter -p tcp --dport 109 -s 192.168.100.200 -j ACCEPT iptables -A Filter -p tcp --dport 110 -s 192.168.100.200 -j ACCEPT iptables -A Filter -p tcp --dport 53 -j ACCEPT iptables -A Filter -p udp --dport 53 -j ACCEPT iptables -A Filter -j DROP 多个端口 iptables -A Filter -p tcp -m multiport --destination-port 22,53,80,110 -s 192.168.20.3 -j REJECT 连续端口 iptables -A Filter -p tcp -m multiport --source-port 22,53,80,110 -s 192.168.20.3 -j REJECT iptables -A Filter -p tcp --source-port 2:80 -s 192.168.20.3 -j REJECT 指定时间上网 iptables -A Filter -s 10.10.10.253 -m time --timestart 6:00 --timestop 11:00 --days Mon,Tue,Wed,Thu,Fri,Sat,Sun -j DROP iptables -A Filter -m time --timestart 12:00 --timestop 13:00 --days Mon,Tue,Wed,Thu,Fri,Sat,Sun -j ACCEPT iptables -A Filter -m time --timestart 17:30 --timestop 8:30 --days Mon,Tue,Wed,Thu,Fri,Sat,Sun -j ACCEPT 禁止多个端口服务 iptables -A Filter -m multiport -p tcp --dport 21,23,80 -j ACCEPT 将WAN 口NAT到PC iptables -t nat -A PREROUTING -i $INTERNET_IF -d $INTERNET_ADDR -j DNAT --to-destination 192.168.0.1 将WAN口8000端口NAT到192。168。100。200的80端口 iptables -t nat -A PREROUTING -p tcp --dport 8000 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.200:80 MAIL服务器要转的端口 iptables -t nat -A PREROUTING -p tcp --dport 110 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.200:110 iptables -t nat -A PREROUTING -p tcp --dport 25 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.200:25 只允许PING 202。96。134。133,别的服务都禁止 iptables -A Filter -p icmp -s 192.168.100.200 -d 202.96.134.133 -j ACCEPT iptables -A Filter -j DROP 禁用BT配置 iptables –A Filter –p tcp –dport 6000:20000 –j DROP 禁用QQ防火墙配置 iptables -A Filter -p udp --dport ! 53 -j DROP iptables -A Filter -d 218.17.209.0/24 -j DROP iptables -A Filter -d 218.18.95.0/24 -j DROP iptables -A Filter -d 219.133.40.177 -j DROP 基于MAC,只能收发邮件,其它都拒绝 iptables -I Filter -m mac --mac-source 00:0A:EB:97:79:A1 -j DROP iptables -I Filter -m mac --mac-source 00:0A:EB:97:79:A1 -p tcp --dport 25 -j ACCEPT iptables -I Filter -m mac --mac-source 00:0A:EB:97:79:A1 -p tcp --dport 110 -j ACCEPT 禁用MSN配置 iptables -A Filter -p udp --dport 9 -j DROP iptables -A Filter -p tcp --dport 1863 -j DROP iptables -A Filter -p tcp --dport 80 -d 207.68.178.238 -j DROP iptables -A Filter -p tcp --dport 80 -d 207.46.110.0/24 -j DROP 只允许PING 202。96。134。133 其它公网IP都不许PING iptables -A Filter -p icmp -s 192.168.100.200 -d 202.96.134.133 -j ACCEPT iptables -A Filter -p icmp -j DROP 禁止某个MAC地址访问internet: iptables -I Filter -m mac --mac-source 00:20:18:8F:72:F8 -j DROP 禁止某个IP地址的PING: iptables –A Filter –p icmp –s 192.168.0.1 –j DROP 禁止某个IP地址服务: iptables –A Filter -p tcp -s 192.168.0.1 --dport 80 -j DROP iptables –A Filter -p udp -s 192.168.0.1 --dport 53 -j DROP 只允许某些服务,其他都拒绝(2条规则) iptables -A Filter -p tcp -s 192.168.0.1 --dport 1000 -j ACCEPT iptables -A Filter -j DROP 禁止某个IP地址的某个端口服务 iptables -A Filter -p tcp -s 10.10.10.253 --dport 80 -j ACCEPT iptables -A Filter -p tcp -s 10.10.10.253 --dport 80 -j DROP 禁止某个MAC地址的某个端口服务 iptables -I Filter -p tcp -m mac --mac-source 00:20:18:8F:72:F8 --dport 80 -j DROP 禁止某个MAC地址访问internet: iptables -I Filter -m mac --mac-source 00:11:22:33:44:55 -j DROP 禁止某个IP地址的PING: iptables –A Filter –p icmp –s 192.168.0.1 –j DROPl come from:http://blog.csdn.net/cssmhyl/article/details/7966789 上一篇iOS设备中WiFi、蓝牙和飞行模式的开启与关闭 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |