linux GPT分区工具

您所在的位置：网站首页 › gpt分区教程 › linux GPT分区工具

linux GPT分区工具

2023-08-09 19:25| 来源: 网络整理| 查看: 265

事出有因，为什么会写这篇博客？由于需要制作SD/TF启动卡，ARM linux指定采用GPT分区，所以在ubuntu需要一款能够进行GPT分区工具。

目前能够进行GPT分区的工具有gdisk、parted。

但是我需要对GPT某一个分区进行指定PARTUUID/PARTLABEL，所以此文章采用gdisk进行GPT分区。

gdisk工具使用教程：

1）进入gdisk交互界面

# sudo gdisk /dev/sdc

2）创建一个新的空 GUID 分区表（GPT）

Command (? for help): o This option deletes all partitions and creates a new protective MBR. Proceed? (Y/N): Y

2）修改扇区为64-sector对齐

Command (? for help): x Expert command (? for help): d Partitions will begin on 2048-sector boundaries. Expert command (? for help): l Enter the sector alignment value (1-65536, default = 2048): 64 Expert command (? for help): d Partitions will begin on 64-sector boundaries. Expert command (? for help): m

3）新创建一个分区

Command (? for help): n Partition number (1-128, default 1): First sector (34-15407070, default = 64) or {+-}size{KMGTP}: Last sector (64-15407070, default = 15407070) or {+-}size{KMGTP}: 8192 Current type is 'Linux filesystem' Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux filesystem' Command (? for help): p Disk /dev/sdc: 15407104 sectors, 7.3 GiB Logical sector size: 512 bytes Disk identifier (GUID): 3C2DB04C-244C-4472-B248-A2C6927CE4B4 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 15407070 Partitions will be aligned on 64-sector boundaries Total free space is 15398908 sectors (7.3 GiB) Number Start (sector) End (sector) Size Code Name 1 64 8192 4.0 MiB 8300 Linux filesystem

4）修改某一个分区的名字（即PARTLABEL）

Command (? for help): c Partition number (1-10): 1 Enter name: loader

5）修改某一个分区的PARTUUID

Command (? for help): x Expert command (? for help): c Partition number (1-10): 9 Enter the partition's new unique GUID ('R' to randomize): 614e0000-0000-4b53-8000-1d28000054a9 New GUID is 614E0000-0000-4B53-8000-1D28000054A9 Expert command (? for help): m Command (? for help): i Partition number (1-10): 9 Partition GUID code: 0FC63DAF-8483-4772-8E79-3D69D8477DE4 (Linux filesystem) Partition unique GUID: 614E0000-0000-4B53-8000-1D28000054A9 First sector: 368640 (at 180.0 MiB) Last sector: 7708671 (at 3.7 GiB) Partition size: 7340032 sectors (3.5 GiB) Attribute flags: 0000000000000000 Partition name: 'rootfs'

6）保存GPT分区表并退出

Command (? for help): w Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): Y OK; writing new GUID partition table (GPT) to /dev/sdc. The operation has completed successfully.

额外小知识：

PARTUUID与UUID的区别？

答：

PARTUUID/PARTLABEL identifies a GPT partition. UUID/LABEL identifies a filesystem.

PARTUUID/PARTLABEL have the advantage that they don't change if your reformat the partition with another filesystem. It's also useful if you don't have a filesystem on the partition (or use LUKS, which doesn't support LABELs).

参考链接：

[SOLVED] What is the difference between UUID and PARTUUID?

[Solved] How to change a partitions PARTUUID ?

【本文地址】

linux GPT分区工具

linux GPT分区工具

今日新闻

推荐新闻