ensp配置ssh后无法远程连接问题

您所在的位置：网站首页 › ensp服务器无响应 › ensp配置ssh后无法远程连接问题

ensp配置ssh后无法远程连接问题

2024-01-02 08:50| 来源: 网络整理| 查看: 265

报错：Info: The connection was closed by the remote host 在这里插入图片描述在使用router配置ssh登录后，我通过Router1 ssh 登录Router2，出现如上报错信息。使用旁边的AR3260设备则可以ssh登录。以下为AR1，AR2的配置。 AR2（被远程登录的对象）：

[Huawei]sysname R2 [R2]user-interface vty 0 4 [R2-ui-vty0-4]authentication-mode aaa [R2-ui-vty0-4]protocol inbound ssh [R2-ui-vty0-4]q [R2]aaa [R2-aaa]local-user user1 password cipher 123 [R2-aaa]local-user user1 privilege level 3 [R2-aaa]local-user user1 service-type ssh [R2-aaa]q [R2]ssh user user1 authentication-type password [R2]stelnet server enable [R2]rsa local-key-pair create [R2]int g0/0/0 [R2-GigabitEthernet0/0/0]ip address 1.1.1.1 24

AR1（作为要远程登录的路由器）：

[Huawei]sysname R1 [R1]int g0/0/0 [R1-GigabitEthernet0/0/0]ip address 1.1.1.2 24 [R1-GigabitEthernet0/0/0]qu [R1]ping 1.1.1.1 PING 1.1.1.1: 56 data bytes, press CTRL_C to break Reply from 1.1.1.1: bytes=56 Sequence=1 ttl=255 time=150 ms Reply from 1.1.1.1: bytes=56 Sequence=2 ttl=255 time=30 ms Reply from 1.1.1.1: bytes=56 Sequence=3 ttl=255 time=20 ms [R1]ssh client first-time enable [R1]stelnet 1.1.1.1 Please input the username:user1 Trying 1.1.1.1 ... Press CTRL+K to abort Connected to 1.1.1.1 ... The server is not authenticated. Continue to access it? (y/n)[n]:y Jul 25 2022 15:09:39-08:00 R1 %%01SSH/4/CONTINUE_KEYEXCHANGE(l)[2]:The server ha d not been authenticated in the process of exchanging keys. When deciding whethe r to continue, the user chose Y. [R1] Save the server's public key? (y/n)[n]:y The server's public key will be saved with the name 1.1.1.1. Please wait... Jul 25 2022 15:09:40-08:00 R1 %%01SSH/4/SAVE_PUBLICKEY(l)[3]:When deciding wheth er to save the server's public key 1.1.1.1, the user chose Y. [R1] Enter password:

【本文地址】

ensp配置ssh后无法远程连接问题

ensp配置ssh后无法远程连接问题

今日新闻

推荐新闻